Influence of electric field and current on the strength of depoled GaN piezoelectric semiconductive ceramics
Source abstract
Abstract
Abstract By using three-point bending tests, the effects of an applied DC electric field and current on the strength of depoled GaN piezoelectric semiconductive ceramics are investigated. Under combined mechanical-voltage-electrical current loading, the corresponding stress and electric fields and carrier distribution in specimens are analyzed based on the finite element method. It is shown that, when an electric field of 0.95 kV cm–1 is applied, the bending strength decreases by 14.7% and then, remains unchangeable with further increase of the electric field. In contrast, the bending strength decreases from 11.5 to 8.5 MPa as the applied electric current increases from 0 to 5 × 104 A m–2. The results imply that there is a strong correlation between the bending strength and electric field or current for piezoelectric semiconductive ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Ultrasonics and Acoustic Wave Propagation · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Amplification of acoustic waves in piezoelectric semiconductor plates10.1016/j.ijsolstr.2004.10.011 ↗
2. Strained layer piezoelectric semiconductor devices10.1016/S0026-2692(96)00135-8 ↗
3. Electron devices on piezoelectric semiconductors: a device model10.1109/T-SU.1984.31484 ↗
4. Piezoelectricity and conductivity in ZnO and CdS10.1103/PhysRevLett.4.505 ↗
5. Flexible piezotronic strain sensor10.1021/nl802367t ↗
6. SnO2 electroceramics with various additives10.1016/S0955-2219(01)00119-4 ↗
7. Ohmic contact of Ni electrodes by sintering in atmosphere to PTCR semiconductive ceramics
8. Amplification of ultrasonic waves in piezoelectric semiconductors
9. Investigation of the fracture toughness and electrical properties of (K, Na, Li) (Nb, Ta, Sb)O3, ceramics10.1016/j.ceramint.2016.08.093 ↗
10. Failure mechanism models for brittle fracture10.1109/24.159794 ↗
11. Impact of MOSFET gate-oxide reliability on CMOS operational amplifier in a 130-nm low-voltage process
12. Amerasekera · 1996
13. Chim · 2000
14. Piezoelectric field effect transistor and nanoforce sensor based on a single ZnO nanowire10.1021/nl061802g ↗
15. Analysis of a circular piezoelectric semiconductor embedded in a piezoelectric semiconductor substrate10.1007/s00419-006-0035-7 ↗
16. Robustness and electrical reliability of AZO/Ag/AZO thin film after bending stress10.1016/j.solmat.2017.02.037 ↗
17. The piezoelectric semiconductor and acoustoelectronic device development in the sixties10.1109/TUFFC.2005.1503961 ↗
18. Piezotronic effect: an emerging mechanism for sensing applications10.3390/s150922914 ↗
19. GaN HEMT reliability10.1016/j.microrel.2009.07.003 ↗
20. Reliability improvement in GaN HEMT power device using a field plate approach10.1016/j.sse.2017.05.001 ↗
21. Semiconducting properties of Cu2In3VO9 ceramic material
22. Semiconductive behavior of polymer-derived SiCN ceramics for hydrogen sensing10.1111/jace.13520 ↗
23. Potential of vibro-milling technique for preparation of electroceramic nanopowders10.1016/j.ceramint.2007.09.090 ↗
24. Effect of SiC content on electrical, thermal and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites10.1016/j.jeurceramsoc.2016.09.024 ↗
25. On the relationship between ceramic strength and the requirements for mechanical design10.1016/j.jeurceramsoc.2014.04.026 ↗
26. Piezoelectric coefficients of GaN determined by hopping conduction of carriers10.1063/1.4966995 ↗
27. Enhancement of light extraction efficiency for GaN-based light emitting diodes using ZrO2 high-aspect-ratio pattern as scattering layer10.1016/j.ceramint.2017.05.209 ↗
28. An anti-plane crack in a piezoelectric semiconductor10.1007/s10704-006-6943-2 ↗
29. A mode III crack in a piezoelectric semiconductor of crystals with 6 mm symmetry10.1016/j.ijsolstr.2006.10.033 ↗
30. Dynamic anti-plane crack analysis in functional graded piezoelectric semiconductor crystals
31. Influence of electric conductivity on intensity factors for cracks in functionally graded piezoelectric semiconductors10.1016/j.ijsolstr.2015.01.012 ↗
32. Fully coupled thermoelectromechanical analysis of GaN high electron mobility transistor degradation10.1063/1.3698492 ↗
33. Piezoresistive effect in wurtzite n-type GaN10.1063/1.116543 ↗
34. Simulation and optimization of GaN-based metal-oxide-semiconductor high-electron-mobility-transistor using field-dependent drift velocity model10.1063/1.2764206 ↗
35. Hot electron generation under large-signal radio frequency operation of GaN high-electron-mobility transistors
36. Extended displacement discontinuity method for analysis of cracks in 2D piezoelectric semiconductors10.1016/j.ijsolstr.2016.05.009 ↗
37. Holzapfel · 2000
38. Extended displacement discontinuity method for analysis of cracks in 2D thermal piezoelectric semiconductors10.1088/1361-665X/aa754d ↗
39. Current–voltage characteristics of ZnO nanowires under uniaxial loading10.1109/TNANO.2014.2318137 ↗
40. High-performing transparent photodetectors based on Schottky contacts10.1016/j.mssp.2017.03.024 ↗
41. Sze · 2006
42. Impact of Yb, In, Ag and Au thin film substrates on the crystalline nature, Schottky barrier formation and microwave trapping properties of Bi2O3 films10.1016/j.mssp.2017.02.028 ↗
43. Zhou · 2002
44. Vasileska · 2010
45. Influences of temperature and electric field on the bending strength of lead zirconate titanate ceramics10.1016/S1359-6454(00)00010-0 ↗