Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings
Source abstract
Abstract
Abstract WS 2 /Zr soft-coatings were deposited on Si 3 N 4 /TiC ceramic cutting tools by medium-frequency magnetron sputtering together with multi-arc ion plating. Microstructural and fundamental properties of the coatings were examined and dry cutting tests on hardened steel were carried out. The cutting performance and wear characteristic of the coated tools were investigated compared with uncoated tool. Results show that the WS 2 /Zr coated Si 3 N 4 /TiC cutting tools significantly improve the lubricity at the tool–chip interface; the cutting force, cutting temperature, friction coefficient and tool wear are reduced and the tool life is increased compared with uncoated tool. Crater wear and flank wear occurred both on uncoated and coated tools. Abrasive wear, adhesions and chipping are the predominant wear mechanisms of uncoated tool on crater wear and flank wear; abrasive wear, coating delamination and chipping are the main wear mechanisms of WS 2 /Zr coated tools. Friction-reduction and increased wear-resistance are attributed to the formation of a transfer lubricant layer at the tool–chip interface during the dry cutting process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Studies on the application of hot-pressed silicon nitride ceramics as cutting-tools10.1016/0272-8842(85)90169-5 ↗
2. Fabrication and mechanical properties of Si3N4/(W,Ti)C/Co graded nano-composite ceramic tool materials10.1016/j.ceramint.2014.10.067 ↗
3. Machining force studies on ductile machining of silicon nitride10.1016/j.jmatprotec.2005.04.092 ↗
4. Wear performance of ceramic cutting tool materials when cutting steel10.1016/0924-0136(91)90202-P ↗
5. On the performance of a silicon nitride cutting tool in machining steel10.1016/0278-6125(90)90030-L ↗
6. Tribological behaviour of Si3N4–BN ceramic materials for dry sliding applications10.1016/S0043-1648(02)00219-3 ↗
7. Influence of sliding speed on the tribological characteristics of Si3N4–hBN ceramic materials10.1080/10402004.2013.789576 ↗
8. Tribological behavior of W2C nano-particle reinforced Si3N4 matrix composite10.1016/j.wear.2004.05.013 ↗
9. Tribological behavior of Mo5Si3 particle reinforced Si3N4 matrix composites10.1016/j.wear.2004.09.048 ↗
10. Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning10.1016/S0263-4368(99)00008-6 ↗
11. Coated tools for metal cutting features and applications10.1016/S0007-8506(07)63231-4 ↗
12. Re-sharpenable thick CVD diamond-coated Si3N4 tools for hardmetal turning10.1016/j.surfcoat.2006.03.005 ↗
13. Cutting performance of multilayer diamond coated silicon nitride inserts in machining aluminum-silicon alloy10.1016/S1003-6326(13)62687-4 ↗
14. Low pressure microwave plasma assisted chemical vapor deposition (MPCVD) of diamond coatings on silicon nitride cutting tools10.1016/S0040-6090(01)01262-7 ↗
15. Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics10.1016/j.jmatprotec.2005.02.094 ↗
16. Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics10.1016/j.jmatprotec.2005.04.032 ↗
17. Microstructure of TiAlN and CrAlN coatings and cutting performance of coated silicon nitride inserts in cast iron turning10.1016/j.ceramint.2014.02.083 ↗
18. Documentation of tool wear progress in the machining of nodular ductile iron with silicon nitride-based ceramic tools10.1016/j.cirp.2011.03.083 ↗
19. Nanometer grain titanium carbonitride coatings with continuously graded interface onto silicon nitride cutting tools by pulsed high energy density plasma10.1016/j.msea.2004.06.005 ↗
20. The cutting performance and wear mechanism of ceramic cutting tools with MoS2 coating deposited by magnetron sputtering10.1016/S0043-1648(99)00168-4 ↗
21. Cutting performance and wear characteristics of Al2O3/TiC ceramic cutting tools with WS2/Zr soft-coatings and nano-textures in dry cutting10.1016/j.wear.2014.06.001 ↗
22. Friction and wear of MoS2 films on laser textured steel surfaces10.1016/j.surfcoat.2007.12.009 ↗
23. Tribological properties of laser-textured and ta-C coated surfaces with burnished WS2 at elevated temperatures10.1016/j.triboint.2013.09.005 ↗
24. Tribological investigation of MoS2 coatings deposited on the laser textured surface10.1016/j.wear.2012.01.001 ↗
25. Sliding life enhancement of a WS2 sputtered film by ion beam mixing10.1063/1.96057 ↗
26. Structural, mechanical and tribological investigations of sputter deposited CrN-WS2 nanocomposite solid lubricant coatings10.1016/j.triboint.2011.07.007 ↗
27. Tribological characteristics of WS2/MoS2 solid lubricating multilayer films10.1016/j.surfcoat.2003.09.063 ↗
28. Nanoparticle based and sputtered WS2 low-friction coatings-differences and similarities with respect to friction mechanisms and tribo film formation10.1016/j.surfcoat.2013.06.045 ↗
29. Super-low friction of MoS2 coatings in various environments10.1016/0301-679X(95)00094-K ↗
30. The tribological properties of MoS2/metal composite coatings deposited by closed field magnetron sputtering10.1016/S0257-8972(97)00498-2 ↗
31. Performance of PVD MoS2/Zr-coated carbide in cutting processes10.1016/j.ijmachtools.2008.06.009 ↗
32. Structure, morphology and chemical composition of sputter deposited nanostructured Cr–WS2 solid lubricant coatings10.1016/j.surfcoat.2010.07.050 ↗
33. Nanostructured WS2–Ni composite films for improved oxidation, resistance and tribological performance10.1016/j.apsusc.2013.09.024 ↗
34. Microstructure and tribological behavior of WS2–Ag composite films deposited by RF magnetron sputtering10.1016/j.tsf.2007.07.102 ↗
35. Solid lubricant materials for high temperatures-a review10.1016/0301-679X(82)90089-5 ↗
36. A study of micropool lubricated cutting tool in machining of mild steel10.1016/j.jmatprotec.2008.04.024 ↗
37. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes10.1016/j.ijrmhm.2011.08.002 ↗
38. Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel10.1016/j.ijrmhm.2013.10.019 ↗
39. Performance and limitation of hybrid PECVD (hard coating)-PVD magnetron sputtering (MoS2/Ti composite) coated inserts tested for dry high speed milling of steel and grey cast iron10.1016/S0257-8972(02)00692-8 ↗
40. Tribological properties and high speed drilling application of MoS2–Cr coatings10.1016/j.wear.2004.09.045 ↗
41. Mechanical and tribological properties of sputter deposited nanostructured Cr–WS2 solid lubricant coatings10.1016/j.surfcoat.2010.08.074 ↗
42. Nanostructured WS2-Ni composite films for improved oxidation, resistance and tribological performance10.1016/j.apsusc.2013.09.024 ↗
43. Optimization of end milling parameters under minimum quantity lubrication using principal component analysis and grey relational analysis10.1590/S1678-58782012000300005 ↗
44. ISO. 3685-1993, Tool life testing with single point turning tools, 1993.
45. Chen · 1992
46. Self-lubricating behaviors of Al2O3/TiB2 ceramic tools in dry high-speed machining of hardened steel10.1016/j.jeurceramsoc.2004.03.033 ↗
47. Analysis of tool wear patterns in finishing turning of Inconel 71810.1016/j.wear.2012.11.004 ↗