Electroplating assisted diffusion bonding of ZrC–SiC composite for full ceramic joints
Source abstract
Abstract
Abstract Electroplated Ni interlayer was used in the diffusion bonding of ZrC–SiC composite. The interfacial reaction focused on Ni-SiC reaction system. Corresponding reaction products were identified to be Ni 2 Si and graphite. An optimal Ni interlayer of 4 μm, which was precisely controlled by adjusting the plating time, was designed to ensure a reliable bonding for full ceramic joints. Shear strength of the electroplating assisted joints reaches 183 MPa and 45 MPa at room temperature and 800 °C, respectively, which are 9% and 67% higher than that of the traditional joints bonded with thicker Ni foil.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Fabrication of a ZrC–SiC matrix for ceramic matrix composites and its properties10.1016/j.ceramint.2012.01.023 ↗
2. From trimethylvinylsilane to ZrC–SiC hybrid materials10.1016/j.jeurceramsoc.2010.12.014 ↗
3. Reactive hot pressing of ZrC–SiC ceramics at low temperature10.1111/jace.12090 ↗
4. Microstructure and shear strength of self-joined ZrB2 and ZrB2-SiC with pure Ni10.1016/j.scriptamat.2010.08.056 ↗
5. Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics10.1016/j.ceramint.2005.03.024 ↗
6. Flexural strength and shear strength of silicon carbide to silicon carbide joints fabricated by a molybdenum diffusion bonding technique10.1111/j.1551-2916.2005.00381.x ↗
7. Transient-liquid-phase and liquid-film-assisted joining of ceramics10.1016/j.jeurceramsoc.2005.06.034 ↗
8. Joining of silicon nitride via a transient liquid10.1016/S1359-6462(97)00007-9 ↗
9. An evaluation of the partial transient liquid phase bonding of Si3N4 using Au coated Ni-22Cr foils10.1016/1359-6454(95)00187-5 ↗
10. Advances in transient-liquid-phase bonding of ultra-high temperature ZrC ceramics10.1515/htmp-2012-0087 ↗
11. Joining of ultra-refractory carbides10.1016/j.jeurceramsoc.2012.07.019 ↗
12. Microstructure evolution and its effect on the mechanical properties of the ZrC–SiC composite joint diffusion bonded with pure Ni foil10.1016/j.ceramint.2013.04.074 ↗
13. Wetting and bonding of Ni-Si alloys on silicon carbide10.1016/S1359-6454(98)00374-7 ↗
14. Survey on wetting of SiC by molten metals10.1016/j.ceramint.2010.01.001 ↗
15. Growth of silicides in Ni-Si and Ni-SiC bulk diffusion couples