journal article·2013-12

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO–ZrO2

Qi Tang, Jianghong Gong

Ceramics International· Volume 39· Issue 8
Publisher page

Abstract

Microhardness tests were conducted on a series of NiO–ZrO2 ceramics with different porosities ranging from 2% to 18%. For each sample, the measured hardness decreases with increasing indentation load, showing a significant indentation size effect. The indentation data were analyzed according to the modified proportional specimen resistance (PSR) model and it was found that the resultant load-independent hardness decreases with increasing porosity. The porosity-dependence of the load-independent hardness was analyzed and a concept of true hardness was proposed to characterize the actual material resistance to indentation-induced plastic deformation. Furthermore, the applicability of the modified PSR model in describing the indentation size effect observed on porous materials is discussed. & 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Characterization of silicon nitride single crystals and polycrystalline reaction sintered silicon nitride by microhardness measurements10.1007/BF00550375 ↗
2. Microhardness of SiO2 glass in various environments10.1111/j.1151-2916.1987.tb05683.x ↗
3. Characterization of hot-pressed silicon nitride based materials by microhardness measurements10.1007/BF01132393 ↗
4. On the microhardness of silicon nitride and sialon ceramics10.1016/0955-2219(90)90021-7 ↗
5. Indentation brittleness of ceramics: a fresh approach10.1023/A:1018671823059 ↗
6. Measurement of hardness on traditional ceramics10.1016/S0955-2219(01)00457-5 ↗
7. Microstructural tailoring and characterization of a calcium α-SiAlON composition10.1111/j.1151-2916.2002.tb00177.x ↗
8. Measurement of Vickers hardness on ceramic floor tiles10.1016/j.jeurceramsoc.2006.04.150 ↗
9. Hot-pressed ZrB2-SiC ceramics with VC addition: chemical reactions, microstructures, and mechanical properties10.1111/j.1551-2916.2009.03293.x ↗
10. Instigation of some physical properties of Gd added Bi-2233 superconductors10.1016/j.jallcom.2010.08.105 ↗
11. Performance and analysis of recording microhardness tests. Phys10.1002/pssa.2210420106 ↗
12. The microhardness indentation load/size effect in rutile and cassiterite single crystals10.1007/BF00400874 ↗
13. Examination of the indentation size effect in low-load Vickers hardness testing of ceramics10.1016/S0955-2219(99)00043-6 ↗
14. An energy-balance analysis for the size effect in low-load hardness testing10.1023/A:1004777607553 ↗
15. Review: indentation size effect, indentation cracks and microhardness measurement of brittle crystalline solids – some basic concepts and trends10.1002/crat.200900385 ↗
16. Recent progresses in the phenomenological description for the indentation size effect in microhardness testing of brittle ceramics10.1007/s40145-012-0004-2 ↗
17. H. Bückle, Mikrohärteprüfung. Berliner Union Verlag, Stuttgart, Germany, 1965.
18. Microhardness of chalcogenide glasses of the system Se-Ge-As10.1007/BF00591466 ↗
19. Load dependence of the apparent hardness of silicon nitride ceramics in a wide range of loads10.1016/S0167-577X(97)00234-6 ↗
20. Load-dependence of Knoop hardness of Al2O3-TiC composites10.1016/S0955-2219(00)00093-5 ↗
21. Load dependence of low-load Knoop hardness in ceramics: a modified PSR model10.1016/S0167-577X(00)00225-1 ↗
22. Load-dependence of the measured hardness of Ti(C,N)-based cermets10.1016/S0921-5093(00)01845-1 ↗
23. Analysis of the indentation size effect in the microhardness measurement of some cobalt-based alloys10.1016/S0254-0584(02)00086-X ↗
24. Hardness characterization of thin Zr(Hf,N) coatings10.1016/S0257-8972(02)00558-3 ↗
25. Analysis of ISE in microhardness measurements of bulk MgB2 superconductors using different models10.1016/j.jallcom.2006.01.075 ↗
26. Dynamic hardness and elastic modulus calculation of porous SiAlON ceramics using depth-sensing indentation technique10.1016/j.jeurceramsoc.2007.09.052 ↗
27. ISE and fracture toughness evaluation by Vickers hardness testing of an Al3Nb-Nb2Al-AlNbNi in situ composite10.1016/j.jallcom.2008.04.016 ↗
28. The indentation size effect on the micro-hardness of sea mollusk shell structures10.3139/120.110201 ↗
29. Mechanical behavior of cordierite and cordierite-mullite materials evaluated by indentation techniques10.1016/S0955-2219(00)00334-4 ↗
30. Evaluation of mechanical properties of gelcast lead zirconate titanate disks sintered at different temperatures10.1016/j.scriptamat.2007.07.034 ↗
31. Comment on Measurement of hardness on traditional ceramics10.1016/S0955-2219(02)00398-9 ↗
32. Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation10.1016/j.jeurceramsoc.2011.02.005 ↗
33. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗