journal article·2014-09

Magnetite/carbon nanocomposites prepared by an innovative combustion synthesis technique—Excellent adsorbent materials

Robert Ianos̗, Cornelia Păcurariu, Georgeta Mihoc

Ceramics International· Volume 40· Issue 8
Publisher page

Abstract

Magnetite nanoparticles embedded within a matrix of activated carbon were prepared for the first time using a simple and effective combustion synthesis technique. The resulting nanocomposites had a magnetite/carbon ratio varying between 1/1 and 1/10 and exhibited a ferrimagnetic behavior. As the magnetite/carbon ratio decreased from 1/1 to 1/10, the BET surface area increased from 360 m2/g to 814 m2/g and the saturation magnetization decreased from 34.1 emu/g to 7.8 emu/g. The removal efficiency of phenol and p-chlorophenol increased as the magnetite/carbon ratio decreased. Using an adsorbent mass of 2 g/L, magnetite/carbon nanocomposites showed a removal efficiency ranging from 89% to 98% for p-chlorophenol. For the same adsorbent mass, the removal efficiency of phenol varied between 59% and 91%. The experimental data for phenol and p-chlorophenol adsorption on magnetite/carbon nanocomposites were best fitted by the Sips isotherm and showed a significant increase of the maximum adsorption capacity with the increase of the carbon content. The unique combination of enhanced adsorption capacity, excellent separation capability and the short time span for reaching equilibrium indicates that the as-prepared magnetite/carbon nanocomposites are excellent adsorbent materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Nanomaterials for catalytic reactions · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Bioremediation approaches for organic pollutants: a critical perspective10.1016/j.envint.2011.06.003 ↗
2. Low cost adsorbents for the removal of organic pollutants from wastewater10.1016/j.jenvman.2012.08.028 ↗
3. Combination of Advanced Oxidation Processes and biological treatments for wastewater decontamination—a review10.1016/j.scitotenv.2010.08.061 ↗
4. A review on chemical coagulation/flocculation technologies for removal of color from textile wastewaters10.1016/j.jenvman.2011.09.012 ↗
5. Environmental aspects on the photodegradation of reactive triazine dyes in aqueous media10.1016/j.jphotochem.2012.11.018 ↗
6. Removal of pharmaceuticals and endocrine disrupting compounds in a water recycling process using reverse osmosis systems10.1016/j.seppur.2010.11.020 ↗
7. Combination of ion exchange system and biological reactors for simultaneous removal of ammonia and organics10.1016/j.jenvman.2010.11.028 ↗
8. Extraction and recovery of methylene blue from industrial wastewater using benzoic acid as an extractant10.1016/j.jhazmat.2008.06.122 ↗
9. Phenol adsorption on an N-methylacetamide-modified hypercrosslinked resin from aqueous solutions10.1016/j.cej.2012.03.078 ↗
10. Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): a review10.1016/j.jhazmat.2012.11.011 ↗
11. Recovery, concentration and purification of phenolic compounds by adsorption: a review10.1016/j.jfoodeng.2011.02.010 ↗
12. Conventional and non-conventional adsorbents for removal of pollutants from water—a review
13. Adsorption of organic molecules from aqueous solutions on carbon materials10.1016/j.carbon.2003.09.022 ↗
14. The investigation of phenol removal from aqueous solutions by zeolites as solid adsorbents10.1016/j.jhazmat.2010.08.059 ↗
15. A clay–vesicle system for water purification from organic pollutants10.1016/j.watres.2007.09.004 ↗
16. Preparation of hydrophobic granular silica aerogels and adsorption of phenol from water10.1016/j.apsusc.2013.05.066 ↗
17. Poly(methacrylic acid) based hydrogel as sorbents for removal of cationic dye basic yellow 28: kinetics, equilibrium study and image analysis10.1016/j.cej.2012.11.081 ↗
18. Magnetite/reduced graphene oxide nanocomposites: one step solvothermal synthesis and use as a novel platform for removal of dye pollutants10.1007/s12274-011-0111-3 ↗
19. Magnetic nanoparticles: essential factors for sustainable environmental applications10.1016/j.watres.2013.02.039 ↗
20. Use of iron oxide nanomaterials in wastewater treatment: a review10.1016/j.scitotenv.2012.02.023 ↗
21. Use of iron-based technologies in contaminated land and groundwater remediation: a review10.1016/j.scitotenv.2008.07.002 ↗
22. Water purification using magnetic assistance: a review10.1016/j.jhazmat.2010.04.105 ↗
23. Removal of cationic dyes from aqueous solution using magnetic multi-wall carbon nanotube nanocomposite as adsorbent10.1016/j.jhazmat.2008.09.072 ↗
24. Removal of methylene blue from aqueous solution with magnetite loaded multi-wall carbon nanotube: kinetic, isotherm and mechanism analysis10.1016/j.jhazmat.2011.10.041 ↗
25. Fabrication of novel magnetic chitosan grafted with graphene oxide to enhance adsorption properties for methyl blue10.1016/j.jhazmat.2012.02.068 ↗
26. CVD synthesis of coal-gas-derived carbon nanotubes and nanocapsules containing magnetic iron carbide and oxide10.1016/j.carbon.2006.05.030 ↗
27. Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution10.1016/j.carbon.2006.04.024 ↗
28. Carbon-encapsulated magnetic nanoparticles as separable and mobile sorbents of heavy metal ions from aqueous solutions10.1016/j.carbon.2009.01.007 ↗
29. Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene10.1016/j.carbon.2004.09.020 ↗
30. Removal of methylene blue from aqueous solution by a solvothermal-synthesized graphene/magnetite composite10.1016/j.jhazmat.2011.06.068 ↗
31. One-pot solvothermal preparation of magnetic reduced graphene oxide—ferrite hybrids for organic dye removal10.1016/j.carbon.2012.01.057 ↗
32. Solution combustion synthesis of nanomaterials10.1016/j.proci.2006.07.052 ↗
33. In situ preparation of the supported catalysts by solution combustion synthesis10.1021/jp054486n ↗
34. Combustion synthesis and nanomaterials10.1016/j.cossms.2008.12.002 ↗
35. Fundamentals, properties and applications of solid catalysts prepared by solution combustion synthesis (SCS)10.1016/j.apcata.2012.11.024 ↗
36. Mineralogical notes. An infrared absorption analysis of magnetite
37. Theophanides · 2012
38. Selective synthesis of Fe2O3 and Fe3O4 nanowires via a single precursor: a general method for metal oxide nanowires10.1007/s11671-010-9641-y ↗
39. Kinetic studies on the adsorption of phenol, 4-chlorophenol, and 2,4-dichlorophenol from water using activated carbons10.1016/j.jenvman.2010.05.018 ↗
40. Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon Part I. Two-parameter models and equations allowing determination of thermodynamic parameters10.1016/j.jhazmat.2007.01.021 ↗
41. Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon Part II. Models with more than two parameters10.1016/j.jhazmat.2007.01.023 ↗
42. Adsorption of phenolic compounds by activated carbon – a critical review10.1016/j.chemosphere.2004.09.067 ↗
43. Adsorption characteristics of phenol and chlorophenols on granular activated carbons(GAC)10.1016/S0026-265X(01)00109-6 ↗