Comparison of the chemical corrosion resistance of magnesia-based refractories by stainless steelmaking slags under vacuum conditions

Abstract This study evaluates commercially available magnesia–chromite, magnesia–carbon and magnesia–doloma bricks for their use in a Vacuum Oxygen Decarburisation ladle. The corrosion behaviour of these bricks by stainless steelmaking slags is, therefore, investigated through crucible tests in a vacuum induction furnace at elevated temperatures (1650 and 1750 °C) and low oxygen partial pressures (5.3 and 3.0×10 −11 atm). The results reveal that magnesia–carbon bricks are severely corroded due to the high dissolution of MgO, while magnesia–chromite and magnesia–doloma refractories exhibit an excellent corrosion resistance. The MgO enrichment in the slag is believed to be the reason of the low wear rate of the MgO–doloma refractories. Rebonded and direct-bonded MgO–chromite refractories show similar corrosion resistance against the slags because of the ‘secondary chromite inactivation’. Decreasing the slag basicity enhances the dissolution of MgO into the slag, thereby increasing the corrosion of the magnesia-based refractories.