journal article·2002-01

Effect of pretreatment on rheological properties of silicon carbide aqueous suspension

Qiang Huang, Mingyuan Gu, Kang Sun, Yanping Jin

Ceramics International· Volume 28· Issue 7
Publisher page

Abstract

Abstract The effect of surface treatments, including leaching with acid solution, base solution and deionized water, on flow properties of SiC aqueous slurry has been studied. The SiC powder was well dispersed irrespective of the surface treatment. However, the viscosity was affected by the surface treatment. Base leaching exhibits a distinctly lower viscosity. The reason for the leach effect was discussed. Calcination of SiC powders at 550 °C is observed to effectively reduce the viscosity of the SiC slurry. But further increase of the calcination temperature will be deleterious to the rheologic properties. The hydration of amorphous SiO 2 on the SiC surface is used to clarify the phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Colloidal processing of ceramics10.1111/j.1151-2916.2000.tb01560.x ↗
2. Novel power-processing methods for advanced ceramics10.1111/j.1151-2916.2000.tb01432.x ↗
3. Advances in composite materials for thermal management in electronic packaging10.1007/s11837-998-0128-6 ↗
4. Direct coagulation casting of silicon carbide components10.1111/j.1151-2916.1999.tb01886.x ↗
5. Effect of slurry structure on the slip casting of silicon carbide powers10.1016/0955-2219(92)90119-X ↗
6. Effect of pH on the dispersabiitv of silicon carbide powders in aqueous mediua10.1016/S0272-8842(98)00027-3 ↗
7. Effect of rheological behavior on properties of cast and sintered silicon carbide10.1016/0272-8842(95)00063-1 ↗
8. Surface modification and dispersion of silicon nitride and silicon carbide powders10.1016/0955-2219(91)90059-9 ↗
9. Gelation, consolation and rlieological properties of boehntite coated silicon carbide suspension10.1111/j.1151-2916.2000.tb01485.x ↗
10. Aqueous silicon nitride suspension: effect of surface treatment on the rbeological and electrokinetic properties10.4028/www.scientific.net/KEM.132-136.285 ↗
11. Effect of acid leaching on rheological behavior of silicon nitride aqueous suspension10.1023/A:1006732719196 ↗
12. Surface chemistry of silicon nitride powders: electrokinetic behavior and ESCA studies10.1016/0166-6622(90)80101-9 ↗
13. Comparision of the surface charge behavior of commercial silicon nitride and silicon carbide powers10.1111/j.1151-2916.1988.tb05796.x ↗
14. Surface characterization of silicon nitride and silicon carbide powers
15. Determination of silicon carbide by diffuse reflectance infrared Fourier transfer spectrometry10.1366/0003702864509042 ↗
16. structural and electrical transport properties of excima(ArF)-laser-crystallized silicon carbide10.1080/13642819508239087 ↗
17. Colloidal behavior of silicon carbide and silicon nitride
18. Stabilization of silicon carbide whisker suspension I: influence of surface oxidation in aqueous suspension10.1111/j.1551-2916.1988.tb00207.x ↗
19. Intrinsic equilibrium constant of β-silicon carbide obtained from surface charge data10.1111/j.1151-2916.1995.tb09088.x ↗
20. Reaction between SiC surface and aqueous solutions containing Al ions. Colloids and Surface10.1016/S0927-7757(97)00084-8 ↗