Enhanced oxidation properties of ZrB2–SiC composite with short carbon fibers at 1600 °C
Source abstract
Abstract
Abstract This study investigated the effect of short carbon fiber (Cf) on the oxidation behavior of ZrB2–SiC composites with fiber volume fractions in the range of 0–20%. Precisely, highly dense composite compacts were manufactured by hot-press process at 2000 °C and 30 MPa for 60min. The addition of Cf increased the relative density of sintered composite The oxidation treatment at 1600 °C in air tube furnace for 0.5 h revealed that oxidation rate of ZrB2–SiC-Cf composites decreased from 292.4 μm/h to 77.6 μm/h (almost 73.5% decline), when the content of Cf changed from 0 to 20%. Moreover, Cf played important roles in blocking and deflecting oxygen diffusion during the oxidation process, which provided a local reduction environment of oxidation products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Sintering behavior of ZrB2–SiC composites doped with Si3N4: a fractographical approach10.1016/j.ceramint.2017.04.144 ↗
2. Reinforcing effects of SiC whiskers and carbon nanoparticles in spark plasma sintered ZrB2 matrix composites10.1016/j.ceramint.2018.07.258 ↗
3. Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide10.1016/j.ceramint.2018.05.071 ↗
4. Spark plasma sintering of TiN ceramics codoped with SiC and CNT10.1016/j.ceramint.2018.10.223 ↗
5. Review of rethinking health care ethics by Stephen Scher and Kasia Kozlowska : Palgrave Macmillan10.1007/s40592-020-00107-z ↗
6. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
7. A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites10.1016/j.ijrmhm.2015.03.002 ↗
8. Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride10.1016/j.ijrmhm.2015.01.004 ↗
9. Ultra-low temperature reactive spark plasma sintering of ZrB2-hBN ceramics10.1016/j.jeurceramsoc.2016.01.044 ↗
10. Properties of Cf/SiC-ZrB2-TaxCy composite produced by reactive hot pressing and polymer impregnation pyrolysis (RHP/PIP)10.1016/j.jeurceramsoc.2019.02.025 ↗
11. A numerical approach to the heat transfer in monolithic and SiC reinforced HfB2, ZrB2 and TiB2 ceramic cutting tools10.1016/j.ceramint.2019.05.095 ↗
12. Effect of multi-walled carbon nanotubes on microstructure and fracture properties of carbon fiber-reinforced ZrB2-based ceramic composite10.1016/j.ceramint.2017.03.018 ↗
13. An analytical solution of melting around a moving elliptical heat source10.1007/BF02653241 ↗
14. Cort · 1994 · 23
15. Rock melting technology and geothermal drilling
16. Processing and properties of ultra-high temperature ceramics for space applications10.1016/j.msea.2007.08.054 ↗
17. Ablation behavior of ZrB2–SiC ultra high temperature ceramics under simulated atmospheric re-entry conditions10.1016/j.compscitech.2008.02.009 ↗
18. Method to improve the oxidation resistance of ZrB2 -based ceramics for reusable space systems10.1016/j.jeurceramsoc.2018.01.025 ↗
19. A processing–microstructure correlation in ZrB2–SiC composites hot-pressed under a load of 10 MPa
20. Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: densification behavior10.1016/j.ceramint.2015.03.033 ↗
21. TEM characterization of spark plasma sintered ZrB2–SiC–graphene nanocomposite10.1016/j.ceramint.2018.05.170 ↗
22. Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2–SiC composites10.1016/j.matchar.2015.03.002 ↗
23. Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite10.1016/j.ceramint.2015.01.014 ↗
24. A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: relative density10.1016/j.ceramint.2018.01.122 ↗
25. Spark plasma sintering of quadruplet ZrB2–SiC–ZrC–Cf composites10.1016/j.ceramint.2019.08.243 ↗
26. Spark plasma sintering of Al-doped ZrB2–SiC composite10.1016/j.ceramint.2018.11.098 ↗
27. Effects of carbon additives on the properties of ZrB2–based composites: a review10.1016/j.ceramint.2018.01.214 ↗
28. Oxidation behavior of graphene nanoplatelet reinforced tantalum carbide composites in high temperature plasma flow10.1016/j.carbon.2013.10.010 ↗
29. Oxidation studies on TaC based ultra-high temperature ceramic composites under plasma arc jet exposure10.1016/j.corsci.2016.03.013 ↗
30. Oxidation behaviour of a continuous carbon fibre reinforced ZrB2 –SiC composite10.1016/j.corsci.2017.04.012 ↗
31. High-performance ZrB2 -SiC-Cf composite prepared by low-temperature hot pressing using nanosized ZrB2 powder10.1016/j.jeurceramsoc.2017.02.008 ↗
32. Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing
33. Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites10.1016/j.ceramint.2018.12.109 ↗
34. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review10.1016/j.jmst.2016.08.004 ↗
35. Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites10.1016/j.jallcom.2008.04.092 ↗
36. Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites10.1016/j.ceramint.2017.08.030 ↗
37. UHTC–carbon fibre composites: preparation, oxyacetylene torch testing and characterisation10.1016/j.jeurceramsoc.2012.08.018 ↗
38. Characteristics of multi-walled carbon nanotube toughened ZrB2 –SiC ceramic composite prepared by hot pressing10.1016/j.ceramint.2015.09.165 ↗
39. Mechanical properties and toughening mechanism of WC-doped ZrB2–ZrSi2 ceramic composites by hot pressing10.1016/j.matdes.2014.04.083 ↗
40. Effect of surface oxidation on thermal shock resistance of ZrB2–SiC–G composite10.1016/j.ijrmhm.2009.10.013 ↗
41. Characterization of hot-pressed graphene reinforced ZrB2 –SiC composite10.1016/j.msea.2014.12.028 ↗
42. Effects of ZrB2 and SiC dual addition on the oxidation resistance of graphite at 1600–2000°C10.1016/j.corsci.2013.06.041 ↗
43. Thermodynamic analysis of ZrB2?SiC oxidation: formation of a SiC-depleted region10.1111/j.1551-2916.2006.01329.x ↗
44. Microstructure and mechanical properties of continuous carbon fiber-reinforced ZrB2-based composites via combined electrophoretic deposition and sintering10.1016/j.jeurceramsoc.2020.10.044 ↗
45. Design, fabrication and high velocity oxy-fuel torch tests of a C f -ZrB 2 - fiber nozzle to evaluate its potential in rocket motors10.1016/j.matdes.2016.07.090 ↗
46. Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration10.1016/j.jeurceramsoc.2020.07.003 ↗
47. Effect of pyrolytic carbon coating on the microstructure and fracture behavior of the Cf/ZrB2-SiC composite10.1016/j.ceramint.2018.07.210 ↗
48. Ablation behavior of C/C-SiC-ZrB2 composites in simulated solid rocket motor plumes10.1016/j.jallcom.2017.08.114 ↗
49. Ablative and mechanical properties of C/C–ZrC composites prepared by precursor infiltration and pyrolysis process10.1016/j.jmst.2014.01.015 ↗
50. Preparation and ablation properties of ZrB2–SiC protective laminae for carbon/carbon composites10.1016/j.ceramint.2014.06.010 ↗
51. Improved ablation resistance of C/SiC-ZrB2 composites via polymer precursor impregnation and pyrolysis10.1016/j.ceramint.2017.06.118 ↗
52. Effect of PyC interphase thickness on mechanical and ablation properties of 3D C f/ZrC–SiC composite10.1016/j.ceramint.2016.04.187 ↗
53. Microstructure, mechanical properties and thermal shock resistance of ZrB2 -SiC-Cf composite with inhibited degradation of carbon fibers10.1016/j.jallcom.2017.02.227 ↗
54. Microstructure, mechanical properties and oxidation behavior of short carbon fiber reinforced ZrB2-20v/oSiC-2v/oB4C composite10.1016/j.msea.2018.01.124 ↗
55. Mechanical property, oxidation and ablation resistance of C/C–ZrB2 –ZrC–SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB210.1016/j.jmst.2016.09.003 ↗
56. Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500°C10.1016/j.jeurceramsoc.2006.10.012 ↗
57. Fabrication and properties of 3-D Cf/ZrB2–ZrC–SiC composites via polymer infiltration and pyrolysis10.1016/j.ceramint.2012.11.074 ↗
58. Enhancement of oxidation resistance via a self-healing boron carbide coating on diamond particles
59. Enhanced tensile strength and thermal conductivity in copper diamond composites with B4C coating10.1038/s41598-017-11142-y ↗
60. Tailoring the thermal shock resistance of titanium carbide by reinforcement with tungsten carbide and carbon nanotubes10.1016/j.ceramint.2017.11.011 ↗
61. The effect of a graphite addition on oxidation of ZrB2–SiC in air at 1500°C10.1016/j.jeurceramsoc.2012.09.016 ↗