Preparation and formation mechanism of C/C–SiC composites using polymer-Si slurry reactive melt infiltration

Abstract This study proposes a polymer-metal slurry reactive melt infiltration (RMI) method to overcome the limitations of conventional RMI in modifying irregular geometric carbon–carbon (C/C) preforms. Herein, polycarbosilane (PCS), polysiloxane, phenol-formaldehyde, and epoxy resin, which were introduced to prepare slurries with Si powder, and subsequently used to modify cylindrical C/C preforms into C/C–SiC composites. Results show that the PCS–Si slurry has the best RMI capability, by which, a cylindrical C/C preform (1.35 g·cm−3) was modified successfully to into a dense C/C–SiC composite (1.92 g·cm−3). PCS plays a vital role in fixing the coating to prevent it from falling off the surface of the C/C preform in PCS–Si slurry RMI. Both of the degree of densification and flexural strength of the C/C–SiC composites increase with an increase in the thickness of the PCS–Si slurry coating. The overreaction of the PCS–Si slurry RMI was effectively suppressed because the content of Si powder is reasonably controlled in the PCS–Si slurry coating. Moreover, nozzle-shaped C/C composites were successfully modified into a C/C–SiC composite for the first time using PCS–Si slurry RMI.