Effects of laser surface remelting on the molten salt corrosion resistance of yttria-stabilized zirconia coatings
Source abstract
Abstract
Abstract In the present study, atmospheric plasma-sprayed yttria-stabilized zirconia coatings were post-remelted by a continuous diode laser to improve the hot corrosion resistance for as-sprayed coatings. The coating surfaces were covered with a salt mixture (V2O5 and Na2SO4) and then subjected to a hot corrosion test at 1100 °C in air. The influence of laser parameters including power and scanning rate on the coating microstructure and corrosion resistance was investigated. Results showed that the hot corrosion resistance can be improved by producing a dense and smooth surface and reducing the coating permeability to the molten salt. The transformation of the hot corrosion mechanisms was clarified on the basis of the observed corrosion behaviors. A laser power of 1500 W and scanning rate of 9 mm/s can produce minimal surface roughness with few segmented cracks, which can provide improved performance of the hot corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Microstructure, mechanical properties and thermal shock resistance of plasma-sprayed nanostructured zirconia coatings10.1016/j.ceramint.2011.04.024 ↗
2. The phase formation and stability of tetragonal ZrO2 prepared in a silica bath10.1016/j.ceramint.2012.08.019 ↗
3. Evaluation of hot corrosion behavior of plasma-sprayed ceria and yttria stabilized zirconia thermal barrier coatings in the presence of Na2SO4+V2O5 molten salt10.1016/j.ceramint.2012.05.047 ↗
4. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
5. Hot corrosion behavior of rare earth zirconates and yttria partially stabilized zirconia thermal barrier coatings10.1016/j.surfcoat.2010.04.044 ↗
6. Hot-corrosion behavior of graded thermal barrier coatings formed by plasma-spraying process10.1361/10599630421497 ↗
7. Hot corrosion behavior of laser-glazed plasma-sprayed yttria-stabilized zirconia thermal barrier coatings in the presence of V 2 O 510.1016/j.surfcoat.2006.07.018 ↗
8. Evaluation of laser-glazed plasma-sprayed thermal barrier coatings under high temperature exposure to molten salts10.1016/j.surfcoat.2005.10.011 ↗
9. The influence of laser treatment on hot corrosion behavior of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings10.1016/j.jeurceramsoc.2014.01.031 ↗
10. The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na2SO4+V2O5)10.1016/j.corsci.2016.11.011 ↗
11. Improving the hot corrosion resistance of plasma-sprayed ceria–yttria stabilized zirconia thermal barrier coatings by laser surface treatment10.1016/j.matdes.2013.12.075 ↗
12. An investigation on the microstructure and oxidation behavior of laser remelted air plasma-sprayed thermal barrier coatings10.1016/j.surfcoat.2012.03.026 ↗
13. Hot corrosion behavior of Al2O3 laser clad plasma-sprayed YSZ thermal barrier coatings10.1016/j.ceramint.2016.08.090 ↗
14. Hot-corrosion behaviors of overlay-clad yttria-stabilized zirconia coatings in contact with vanadate–sulfate salts10.1016/j.jeurceramsoc.2009.10.017 ↗
15. A high performance NiCoCrAlY bond coat manufactured using laser powder deposition10.1016/j.corsci.2017.07.018 ↗
16. Laser glazing of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2013.05.066 ↗
17. Surface modification of Al2O3–ZrO2 (Y2O3) eutectic oxides by laser melting: processing and wear resistance10.1111/j.1551-2916.2008.02728.x ↗
18. Laser-assisted, crack-free surface melting of large eutectic ceramic bodies10.1016/j.jeurceramsoc.2010.08.017 ↗
19. Processing and microstructural study of surface laser remelted Al2O3–YSZ–YAG eutectic plates10.1016/j.jeurceramsoc.2010.08.016 ↗
20. The effect of dynamic local self-preheating in laser cladding on gray cast iron10.5545/sv-jme.2014.1807 ↗
21. Impact analysis of the thermal mechanical coupling characteristics of graphite morphologies during laser cladding of gray cast iron10.1016/j.optlastec.2016.11.011 ↗
22. Microstructural evaluation of laser remelted gadolinium zirconate thermal barrier coatings10.1016/j.surfcoat.2015.06.074 ↗
23. Laser surface modification of plasma-sprayed CYSZ thermal barrier coatings10.1016/j.ceramint.2012.09.005 ↗
24. Enhanced ablation resistance through laser glazing of plasma-sprayed LaTi2Al9O19-based functionally graded thermal barrier coating10.1016/j.ceramint.2016.03.134 ↗
25. Influence of columnar grain microstructure on thermal shock resistance of laser re-melted ZrO 2–7 wt% Y2O3 coatings and their failure mechanism10.1016/j.surfcoat.2015.07.036 ↗
26. Surface laser-glazing of plasma-sprayed thermal barrier coatings10.1016/j.apsusc.2005.01.047 ↗
27. High-temperature hot corrosion behavior of gadolinium zirconate by vanadium pentoxide and sodium sulfate in air10.1016/j.jeurceramsoc.2010.05.002 ↗
28. The influence of laser treatment on thermal shock resistance of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2013.06.008 ↗
29. Structural and dielectric properties of amorphous ZrO2 and HfO210.1103/PhysRevB.74.125108 ↗
30. Next generation thermal barrier coatings for the gas turbine industry10.1007/s11666-010-9593-x ↗