Influence of temperature on sintering behavior and properties of TiC-Fe-Co-Ni-Cr-Mo cermets
Source abstract
Abstract
Abstract Sintering behavior of TiC-Fe-Co-Ni-Cr-Mo cermets with excellent mechanical properties and corrosion resistance was researched systematically by measurements of hardness, transverse rupture strength, scanning electron microscopy, X-ray diffraction and Tafel extrapolation. Results showed that with increase in sintering temperature, the hardness of sintered cermets increased constantly, while the transverse rupture strength initially increased and then decreased. Transverse rupture strength of cermets sintered at 1290 °C reached peak value of 2358.1 MPa. Moreover, cermets sintered at 1370 °C with transverse rupture strength of 1514 MPa and hardness of 67.6 HRC showed the best abrasive resistance and Icorr values of 1.611×e −7 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. In-situ fabrication of TiC-Fe 3 Al cermet10.1016/j.ceramint.2017.01.078 ↗
2. TiC-based cermet prepared by high-energy ball-milling and reactive spark plasma sintering10.1016/j.ceramint.2016.11.039 ↗
3. Microstructure and properties of Ti(C,N)–Mo 2C–Fe cermets10.1016/j.ijrmhm.2009.01.003 ↗
4. Development and application of tool wear: a review of the characterization of TiC-based cermets with different binders10.1016/j.cej.2014.06.078 ↗
5. Preparation of a fine-structured TiC–Co composite by high-energy milling and subsequent heat treatment of a Ti–Co alloy10.1016/j.ceramint.2015.07.064 ↗
6. The milling performances of TiC-based cermet tools with TiN nanopowders addition against normalized medium carbon steel AISI104510.1016/j.wear.2004.11.022 ↗
7. Materials science of cemented carbides – an overview10.1016/S0261-3069(01)00007-3 ↗
8. Effect of Fe on the phases and microstructure of TiC–Fe cermets by combustion synthesis/quasi-isostatic pressing10.1016/j.msea.2004.04.026 ↗
9. Friction and tribological behavior of (Ti, V)C–Co cermets10.1016/S0924-0136(03)00340-6 ↗
10. Microstructure and mechanical properties of TiC–TiN based cermets for tools application10.1016/j.ijrmhm.2008.10.006 ↗
11. Three-body abrasive wear of TiC–NiMo cermets10.1016/j.triboint.2009.06.014 ↗
12. Inorganic binder-containing composite cathode contact materials for solid oxide fuel cells10.1016/j.jpowsour.2012.09.114 ↗
13. Gel-combustion, characterization and processing of porous Ni–YSZ cermet for anodes of solid oxide fuel cells (SOFCs)10.1016/j.ceramint.2010.09.019 ↗
14. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets10.1016/j.ijrmhm.2005.05.008 ↗
15. Self-propagating high-temperature synthesis of TiB2-Ti(C, N) cermets composite powder10.4028/www.scientific.net/AMR.468-471.1247 ↗
16. Effect of Mo addition on the microstructure and mechanical properties of ultra-fine grade TiC–TiN–WC–Mo 2C–Co cermets10.1016/j.ijrmhm.2007.05.005 ↗
17. Microstructure and tribological property of TiC-Mo composite coating prepared by vacuum plasma spraying10.1007/s11666-012-9797-3 ↗
18. Effect of W content on the compression properties and abrasive wear behavior of the (TiB 2 –TiC x N y)/(Ni + W) composites
19. Microstructure and mechanical properties of (Ti,W,Ta)C-xMo-Ni cermets10.1016/j.ijrmhm.2011.09.006 ↗
20. Effect of Mo 2C on erosion–corrosion resistance behavior of Ti(C, N)-based cermets10.1016/j.wear.2012.05.013 ↗
21. Improvement in microstructure and mechanical properties of Ti(C,N)-Fe cermets with the carbon additions10.1016/j.jallcom.2017.01.119 ↗
22. Effect of grain growth inhibitor on the microstructure and mechanical properties of Ti(C,N)-based cermet10.4028/www.scientific.net/KEM.280-283.1413 ↗
23. Effect of WC grain size on the corrosion behavior of WC–Co based hardmetals in alkaline solutions10.1016/j.ijrmhm.2009.02.004 ↗
24. VC- and Cr3C2-doped WC–NbC–Co hardmetals10.1016/j.jallcom.2007.10.038 ↗
25. Oxidation behavior of micro-sized AlO–TiC–Co composites prepared from cobalt-coated powders10.1016/j.ijrmhm.2011.05.003 ↗
26. The effects of metal binder content and carbide grain size on the aqueous corrosion behaviour of TiC–316L stainless steel cermets10.1016/j.ijrmhm.2014.02.002 ↗
27. Aqueous corrosion behaviour of TiC-304L stainless steel cermets in a 3.5wt% NaCl solution10.1016/j.ijrmhm.2017.04.001 ↗
28. Electrical discharge coating of nanostructured TiC-Fe-Co-Ni-Cr-Mo cermets on 304 stainless steel10.1016/j.surfcoat.2016.09.062 ↗
29. Self-propagating high-temperature synthesis and liquid-phase sintering of TiC/Fe composites10.1016/S0924-0136(02)00113-9 ↗
30. Fabrication and properties of the TiC reinforced high-strength steel matrix composite10.1016/j.ijrmhm.2016.03.013 ↗
31. Microstructure instability in TiC-316L stainless steel cermets10.1016/j.ijrmhm.2016.03.012 ↗
32. Corrigendum to “The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316L stainless steel cermets”10.1016/j.wear.2016.01.008 ↗
33. Characteristics of densification and distortion of Ni–Cu liquid-phase sintered tungsten heavy alloy10.1016/S0921-5093(02)00424-0 ↗
34. Microstructural development during liquid phase sintering of Fe and Fe–Mo alloys containing elemental boron additions10.1179/003258905X37558 ↗
35. Wear of titanium carbide reinforced metal matrix composites10.1016/S0043-1648(99)00030-7 ↗
36. The reciprocating wear behaviour of TiC–304L stainless steel composites prepared by melt infiltration10.1016/j.wear.2013.03.040 ↗
37. Influence of TiC additions on the corrosion behaviour of WC-Co hardmetals in alkaline solution10.1016/j.ijrmhm.2014.05.009 ↗
38. Effects of TiC-particulate distribution in AISI 304L stainless steel matrix