Effect of molybdenum substitution on electrochemical performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 cathode material
Source abstract
Abstract
Abstract Molybdenum doping is introduced to improve the electrochemical performance of lithium-rich manganese-based cathode material. X-ray diffraction (XRD) results illustrate that the crystallographic parameters a , c and lattice volume V become larger with the increase of Mo content. The scanning electron microscope (SEM) shows that the molybdenum substitution increases the crystallinity of the primary particles. When evaluated as cathode material, the as-prepared Li[Li 0.2 Mn 0.54- x /3 Ni 0.13- x /3 Co 0.13- x /3 Mo x ]O 2 ( x = 0.007) delivers a discharge capacity of 155.5 mA h g −1 at 5 C (1 C = 250 mA g −1 ) and exhibits the capacity retention of 81.8% at 1 C after 200 cycles. The results of cyclic voltammetry (CV) and electronic impedance spectroscopy (EIS) tests reflect that the molybdenum substitution is able to significantly reduce the electrode polarization and lower the charge-transfer resistance. Within appropriate amount of Mo doping, the lithium ion diffusion coefficient of the material can reach to 8.92 × 10 –15 cm 2 s −1 , which is ~ 30 times higher than that of pristine materials (2.65 × 10 –16 cm 2 s −1 ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Development of a general sustainability indicator for renewable energy systems: a review10.1016/j.rser.2013.12.038 ↗
2. Promoting the development of distributed concentrated solar thermal technology in China10.1016/j.rser.2011.11.005 ↗
3. Ultrathin Na1.08V3O8 nanosheets—a novel cathode material with superior rate capability and cycling stability for Li-ion batteries10.1039/c2ee03215e ↗
4. Kinetics and thermodynamics of arsenate and arsenite biosorption by pretreated spent grains10.2175/106143009X407410 ↗
5. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
6. Overcharging manganese oxides: extracting lithium beyond Mn4+10.1016/j.jpowsour.2005.03.104 ↗
7. Li- and Mn-rich cathode materials: challenges to commercialization
8. Comparative investigation of phosphate-based composite cathode materials for lithium-ion batteries10.1021/am502601r ↗
9. Understanding the anomalous capacity of Li/Li[NixLi1/3−2x/3Mn2/3−x/3]O2 cells using in situ X-ray diffraction and electrochemical studies10.1149/1.1480014 ↗
10. Mechanism of electrochemical activity in Li2MnO310.1021/cm030047u ↗
11. High-energy cathode materials (Li2MnO3-LiMO2) for lithium-ion batteries10.1021/jz400032v ↗
12. Interpreting the structural and electrochemical complexity of 0.5Li2MnO3·0.5LiMO2 electrodes for lithium batteries (M = Mn0.5−xNi0.5−xCo2x, 0 ≤ x ≤ 0.5)10.1039/B618715C ↗
13. Nanoscale phase separation, cation ordering and surface chemistry in pristine Li1.2Ni0.2Mn0.6O2 for Li-ion batteries10.1021/cm4009392 ↗
14. Understanding the phenomenon of increasing capacity of layered 0.65Li[Li1/3Mn2/3]O2·0.35Li(Ni1/3Co1/3Mn1/3)O210.1016/j.jallcom.2008.03.094 ↗
15. Synthesis and electrochemical behavior of Li[Li0.1Ni0.35-x/2CoxMn0.55-x/2]O2 cathode materials10.1016/j.ssi.2003.08.003 ↗
16. Electrochemical behaviors of Li[Li(1-x)/3Mn(2-x)/3Nix/3Cox/3]O2 cathode series (0<x<1) synthesized by sucrose combustion process for high capacity lithium ion batteries10.1016/j.materresbull.2008.01.011 ↗
17. A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: a case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O210.1016/j.jpowsour.2016.12.095 ↗
18. A new approach to improve the high-voltage cyclic performance of Li-rich layered cathode material by electrochemical pre-treatment10.1016/j.jpowsour.2008.04.086 ↗
19. Improving the electrochemical performance of LiMnPO4/C by liquid nitrogen quenching10.1016/j.matlet.2013.07.112 ↗
20. Effect of Al substitution sites on Li1−xAlx(Ni0.5Co0.2Mn0.3)1−yAlyO2 cathode materials for lithium ion batteries10.1016/j.jallcom.2016.05.333 ↗
21. Structural and electrochemical characterization of Mg-doped Li1.2[Mn0.54Ni0.13Co0.13]O2 cathode material for lithium ion batteries10.1016/j.ssi.2015.10.005 ↗
22. Synthesis and electrochemical study of Zr-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 as cathode material for Li-ion battery10.1016/j.ceramint.2015.08.104 ↗
23. coating strategy to improve the comprehensive electrochemical performance of LiVPO4F10.1016/j.jpowsour.2016.02.083 ↗
24. Improved electrochemical performance of Li1.2Ni0.2Mn0.6O2 cathode material with fast ionic conductor Li3VO4 coating10.1007/s11581-015-1484-1 ↗
25. Functioning mechanism of AlF3 coating on the Li- and Mn-rich cathode materials10.1021/cm502071h ↗
26. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade10.1002/anie.201506408 ↗
27. The enhanced high cut-off voltage electrochemical performances of LiNi0.5Co0.2Mn0.3O2 by the CeO2 modification10.1016/j.electacta.2016.09.139 ↗
28. Alleviating surface degradation of nickel-rich layered oxide cathode material by encapsulating with nanoscale Li-ions/electrons superionic conductors hybrid membrane for advanced Li-ion batteries10.1021/acsami.6b09197 ↗
29. Investigation the electrochemical performance of Li1.2Ni0.2Mn0.6O2 cathode material with ZnAl2O4 coating for lithium ion batteries10.1016/j.jallcom.2016.05.329 ↗
30. Enhanced electrochemical properties of LiNiO2-based cathode materials by nanoscale manganese carbonate treatment10.1016/j.apsusc.2017.01.089 ↗
31. Electrochemical performance of zirconium doped lithium rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with porous hollow structure10.1016/j.jpowsour.2015.09.025 ↗
32. Feasibility of using Li2MoO3 in constructing Li-rich high energy density cathode materials10.1021/cm501025r ↗
33. Host structural stabilization of Li1.232Mn0.615Ni0.154O2 through K-doping attempt: toward superior electrochemical performances10.1016/j.electacta.2015.12.021 ↗
34. Retarded phase transition by fluorine doping in Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material10.1016/j.jpowsour.2015.02.085 ↗
35. Effect of Mo6+ doping on electrochemical performance of anatase TiO2 as a high performance anode material for secondary lithium-ion batteries10.1016/j.jallcom.2014.02.019 ↗
36. Improving the electrochemical performance of SnO2 cathodes in lithium secondary batteries by doping with Mo10.1149/1.1391819 ↗
37. Advanced electrochemical properties of Mo-doped Li4Ti5O12 anode material for power lithium ion battery10.1039/c2ra00981a ↗
38. Synthesis, structure, and electrochemical behavior of Li[NixLi1/3−2x/3Mn2/3−x/3]O210.1149/1.1471541 ↗
39. LiNi0.74Co0.26−xMgxO2 cathode material for a Li-ion cell10.1021/cm000153l ↗
40. Layered mixed transition metal oxide cathodes with reduced cobalt content for lithium ion batteries10.1021/cm802316d ↗
41. Role of zirconium dopant on the structure and high voltage electrochemical performances of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium ion batteries10.1016/j.electacta.2015.11.093 ↗
42. Studies on stability and capacity for long-life cycle performance of LiNi0.5Co0.2Mn0.3O2 by Mo modification for lithium-ion battery10.1016/j.jpowsour.2017.05.013 ↗
43. The electrochemical performance of aqueous rechargeable battery of Zn/Na0.44MnO2 based on hybrid electrolyte10.1016/j.jpowsour.2016.10.053 ↗
44. Electrochemical properties of doped lithium titanate compounds and their performance in lithium rechargeable batteries10.1016/j.jpowsour.2007.10.061 ↗
45. Electrochemical de-intercalation kinetics of 0.5Li2MnO3·0.5LiNi1/3Mn1/3Co1/3O2 studied by EIS and PITT10.1016/j.jallcom.2016.12.085 ↗
46. Combustion synthesis of high-performance Li4Ti5O12 for secondary Li-ion battery10.1016/j.ceramint.2008.10.010 ↗
47. Integrated materials xLi2MnO3⋅(1−x)LiMn1/3Ni1/3Co1/3O2 (x=0.3,0.5,0.7) synthesized10.1149/1.3463782 ↗