A simple and efficient method for the synthesis of SiBNC ceramics with different Si/B atomic ratios

Abstract The high-temperature durability of SiBNC ceramics is significantly influenced by Si/B ratios and the synthetic procedures. Single-source synthetic routes can yield homogeneous ceramics at the atomic level, but the Si/B ratio cannot be efficiently adjusted. In this paper, a simple and efficient method for the synthesis of SiBNC precursor polyborosilazanes (PBSZs) with different Si/B ratios has been established via a one-pot reaction involving boron trichloride, dichloromethylsilane and hexamethyldisilazane in different molar ratios. The Si/B ratios of the derived SiBNC ceramics were consistent with that of the precursor PBSZs. When pyrolysed at 1000 °C, PBSZs with 0.52, 0.94 and 2.12 Si/B ratios transformed into SiB 2.6 N 5 C 2.2 , SiB 0.9 N 2.7 C 1.3 and Si 2 BN 3 C 1.4 ceramics respectively. The polymer-to-ceramic process was also studied and featured ceramic yields of 43.2 wt%, 50.1 wt% and 62.2 wt%, respectively. The derived ceramic SiB 0.9 N 2.7 C 1.3 resisted crystallization up until 1700 °C, whereas the SiB 2.6 N 5 C 2.2 and Si 2 BN 3 C 1.4 could remain amorphous up to 1600 °C only. Using the precursor with 0.94 Si/B ratio, the SiBNC ceramic fibres were also obtained.