Dry sliding tribological properties of self-mated couples of B4C-hBN ceramic composites
Source abstract
Abstract
Abstract In this paper, dry sliding tribological properties of self-mated couples of B 4 C-hBN ceramic composites containing different amounts of hBN have been evaluated using a pin-on-disc friction and wear machine, and the worn surfaces of B 4 C-hBN specimens have been observed and analyzed by scanning electron microscope (SEM). It is found that the dry sliding tribological properties of self-mated couples of B 4 C-hBN ceramic composites take on obvious regularity: with hBN content increasing, the friction coefficient gradually decreases, but the wear coefficient gradually increases. The decrease of friction coefficient could be largely attributed to the formation of a transfer film formed on the wearing surface of the B 4 C-hBN specimens. The formation of the film is investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. High-hardness B4C textured by a strong magnetic field technique10.1016/j.scriptamat.2010.10.010 ↗
2. Erosion behavior of B4C based ceramic nozzles by abrasive air-jet10.1016/j.ceramint.2012.05.045 ↗
3. Microstructures and mechanical properties in B4C–CeO2 ceramics10.1016/j.jnucmat.2010.12.093 ↗
4. Fabrication of B4C from Na2B4O7+Mg+C by SHS method10.1016/j.ceramint.2010.10.007 ↗
5. Microstructure and properties of (SiC, TiB2)/B4C composites by reaction hot pressing10.1016/j.ceramint.2005.05.022 ↗
6. Erosion behaviour of B4C-based ceramic composites10.1016/j.ceramint.2009.12.024 ↗
7. Pressureless sintering of B4C–TiB2 composites with Al additions10.1016/j.ceramint.2011.05.096 ↗
8. Effect of Al addition on pressureless sintering of B4C10.1016/j.ceramint.2008.03.003 ↗
9. Microstructures and tribological properties of vacuum plasma sprayed B4C–Ni composite coatings10.1016/j.ceramint.2012.05.101 ↗
10. Understanding the morphological variation in the formation of B4C via carbothermal reduction reaction10.1016/j.ceramint.2016.06.126 ↗
11. Effect of mechanical properties and impact angles on erosion behavior of B4C/TiB2 matrix ceramic nozzle materials10.1016/j.ceramint.2016.02.127 ↗
12. Fabrication and characterization of B4C–ZrB2–SiC ceramics with simultaneously improved high temperature strength and oxidation resistance up to 1600°C10.1016/j.ceramint.2016.01.202 ↗
13. High temperature flexural strength of B4C–ZrB2 ceramic at 1000–1600°C in air10.1016/j.ceramint.2015.07.174 ↗
14. Effect of particle size, heating rate and CNT addition on densification, microstructure and mechanical properties of B4C ceramics10.1016/j.ceramint.2015.03.167 ↗
15. Microstructure and mechanical properties of B4C densified by spark plasma sintering with Si as a sintering aid10.1016/j.ceramint.2014.09.115 ↗
16. Tribochemical interactions boron carbide against steel10.1016/0043-1648(92)90249-8 ↗
17. Friction and wear of boride ceramics in air and water10.1016/0043-1648(93)90391-X ↗
18. Tribology of naturally occurring boric acid films on boron carbide10.1016/S0257-8972(96)02984-2 ↗
19. Formation of ultralow friction surface films on boron carbide10.1063/1.115676 ↗
20. Advances in tribology: the materials point of view10.1016/0043-1648(96)80014-7 ↗
21. Ceramic and ceramic composite materials with improved friction and wear properties10.1080/10402009508983400 ↗
22. Tribological behaviors of SiC/h-BN composite coating at elevated temperatures10.1016/j.triboint.2012.06.026 ↗
23. Effect of hBN content on the friction and wear characteristics of B4C-hBN ceramic composites under dry sliding condition10.1016/j.ceramint.2014.11.074 ↗