Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation
Source abstract
Abstract
Abstract The Ni-rich LiNi0.83Co0.12Mn0.05O2 (NCM83) cathode materials have drawn intensive attention due to the high energy density and low cost. However, Ni-rich LiNi1-x-yCoxMnyO2 still has the fatal weakness of poor cycle stability, limiting its further wide application. Bulk doping is an effective means to enhance the cycle stability, yet the electrochemical performances are very sensitive to the doping quantity. Here a facile method of co-precipitation is adopted to coat (Ni0.4Co0.2Mn0.4)1-xAlx(OH)2+x on precursor particles of NCM83. Al ions diffuse evenly in the NCM83 particles after sintering. The cells are operated at a high cut-off voltage of 4.5 V. The discharge capacity of NCM83 is 187.8 mAh g−1, and decays fast with cycles. The doped sample even exhibits a higher discharge capacity of 195 mAh g−1, and the capacity retention is improved to 83.8% after 200 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. High-energy Ni-rich Li[NixCoyMn1-x-y]O2 cathodes via compositional partitioning for next-generation electric vehicles10.1021/acs.chemmater.7b04047 ↗
2. Synthesis and characterization of LiNi1−x−yCoxMnyO2 as the cathode materials of secondary lithium batteries10.1016/S0378-7753(99)00221-9 ↗
3. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
4. Between scylla and charybdis: balancing among structural stability and energy density of layered NCM cathode materials for advanced lithium-ion batteries10.1021/acs.jpcc.7b06363 ↗
5. Unraveling the origin of instability in Ni-rich LiNi1-2xCoxMnxO2 (NCM) cathode materials10.1021/acs.jpcc.6b00369 ↗
6. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
7. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
8. The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li (Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte10.1016/j.elecom.2007.07.033 ↗
9. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
10. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
11. Y. Levartovsky, X. Wu, C. Erk, S. Maiti, J. Grinblat, M. Talianker, D. Aurbach, Enhancement of structural, electrochemical, and thermal properties of Ni-rich LiNi0.85Co0.1Mn0.05O2 cathode materials for Li-ion batteries by Al and Ti doping, Batteries & Supercaps, 4 (2021), 221-231.10.1002/batt.202000191 ↗
12. Regulating surface and grain-boundary structures of Ni-rich layered cathodes for ultrahigh cycle stability10.1002/smll.201906433 ↗
13. Improved electrochemical performances of Ni-rich LiNi0.83Co0.12Mn0.05O2 by Mg-doping10.1016/j.jpowsour.2020.227718 ↗
14. Improved cyclic stability of LiNi0.8Co0.1Mn0.1O2 via Ti substitution with a cut-off potential of 4.5 V10.1016/j.ceramint.2015.02.026 ↗
15. Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries10.1016/j.jpowsour.2018.10.094 ↗
16. Stabilizing effects of Al-doping on Ni-rich LiNi0.80Co0.15Mn0.05O2 cathode for Li rechargeable batteries10.1016/j.jpowsour.2020.228592 ↗
17. Capacity fading of Ni-rich NCA cathodes: effect of microcracking extent10.1021/acsenergylett.9b02302 ↗
18. Application of first-principles calculations to the design of rechargeable Li-batteries10.1016/S0927-0256(97)00029-3 ↗
19. Synthesis and electrochemical properties of Mg-doped LiNi0.6Co0.2Mn0.2O2 cathode materials for Li-ion battery10.1007/s11595-011-0199-z ↗
20. Synthesis of cation-substituted LiNi0.8Co0.1Mn0.1O2 from laterite10.1007/s11581-013-0957-3 ↗
21. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries10.1016/j.jpowsour.2003.10.009 ↗
22. Co-modification by LiAlO2-coating and Al-doping for LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium-ion batteries with a high cutoff voltage10.1016/j.jallcom.2018.07.223 ↗
23. Electrochemical properties of high nickel content Li(Ni0.7Co0.2Mn0.1)O2 with an alumina thin-coating layer as a cathode material for lithium ion batteries10.1166/jnn.2020.18588 ↗
24. Enhanced electrochemical properties of LiNi0.6Co0.2Mn0.2O2 cathode material by the diffusional Al2O3 coating layer10.1007/s11581-018-2725-x ↗
25. Effect of Al substitution sites on Li1−xAlx(Ni0.5Co0.2Mn0.3)1−yAlyO2 cathode materials for lithium ion batteries10.1016/j.jallcom.2016.05.333 ↗
26. Comprehensive study of Al- and Zr-modified LiNi0.8Mn0.1Co0.1O2 through synergy of coating and doping10.1021/acsaem.0c01420 ↗
27. Effects of the strong oxidant treatment of precursor on the electrochemical properties of LiNi0.8Mn0.1Co0.1O2 for lithium-ion batteries10.1016/j.jallcom.2019.151800 ↗
28. Synthesis of spherical nano to microscale Core−Shell particles Li[(Ni0.8Co0.1Mn0.1)1-x(Ni0.5Mn0.5)x]O2 and their applications to lithium batteries10.1021/cm061746k ↗
29. Bifunctional nano-ZrO2 modification of LiNi0.92Co0.08O2 cathode enabling high-energy density lithium ion batteries10.1016/j.jpowsour.2019.226978 ↗
30. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
31. One strategy to enhance electrochemical properties of Ni-based cathode materials under high cut-off voltage for Li-ion batteries10.1016/j.jpowsour.2016.08.014 ↗
32. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
33. A Mg-doped high-nickel layered oxide cathode enabling safer, high-energy-density Li-ion batteries10.1021/acs.chemmater.8b03900 ↗
34. A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries10.1039/C4TA05902F ↗
35. Performance of Al-doped LiNi1/3Co1/3Mn1/3O2 synthesized from spent lithium ion batteries by sol-gel method10.1016/j.vacuum.2019.109105 ↗
36. Surface layer design of cathode materials based on mechanical stability towards long cycle life for lithium secondary batteries10.1016/j.ensm.2017.05.011 ↗
37. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
38. A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries10.1039/C8EE00155C ↗
39. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
40. Development of microstrain in aged lithium transition metal oxides10.1021/nl5022859 ↗
41. Intergranular cracking as a major cause of long-term capacity fading of layered cathodes10.1021/acs.nanolett.7b00379 ↗
42. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗