Synthesis of nanostructured magnesium silicate with high surface area and mesoporous structure
Source abstract
Abstract
Abstract Nanostructured magnesium silicate with high BET surface area and mesoporous structure was prepared by a hydrothermal method using polyethylene glycol (PEG) as surfactant and magnesium nitrate and sodium silicate aqueous solution as magnesium and silicate sources, respectively. The effects of different parameters such as hydrothermal treatment, reaction temperature, pH, ethanol/PEG ratio and etc. on the structural properties of the synthesized sample were examined. The prepared samples were characterized by X-ray diffraction (XRD), N 2 adsorption (BET) and scanning electron microscopy (SEM) techniques. The results indicated that hydrothermal treatment increased BET surface area from 290 to 394.2 m 2 /g and transfer amorphous phase to crystalline. Also, increasing in aging temperature, aging time, pH value and ethanol/PEG ratio did not change surface area by specific procedure, whereas increasing calcination temperature decreased surface area. Furthermore, hydrothermal treatment and increasing in pH value will change hysteresis loop. The highest BET surface area obtained in this paper is 619.8 m 2 /g.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Characterisation of highly dispersed magnesium silicates prepared from silica sols and selected magnesium salts
2. General and facile syntheses of metal silicate porous hollow nanostructures10.1002/asia.200900561 ↗
3. Zinc silicates: very efficient heterogeneous catalysts for the addition of primary alcohols to alkynes and allenes10.1002/(SICI)1521-3773(19990517)38:10<1401::AID-ANIE1401>3.0.CO;2-4 ↗
4. Chemical transformation and morphology change of nickel–silica hybrid nanostructures via nickel phyllosilicates10.1039/b916837k ↗
5. High-water-content mouldable hydrogels by mixing clay and a dendritic molecular binder10.1038/nature08693 ↗
6. Guest‐molecule‐directed assembly of mesostructured nanocomposite polymer/organoclay hydrogels10.1002/adfm.201002138 ↗
7. Multiresponsive clay-containing layer-by-layer films10.1021/nn202812a ↗
8. Chemical‐template synthesis of micro/nanoscale magnesium silicate hollow spheres for waste‐water treatment10.1002/chem.200902799 ↗
9. Magnesium silicate hollow nanostructures as highly efficient absorbents for toxic metal ions10.1021/jp9014756 ↗
10. Bionanocomposites as new carriers for influenza vaccines10.1002/adma.200900181 ↗
11. Poly (ε-caprolactone)/graphene oxide biocomposites: mechanical properties and bioactivity10.1088/1748-6041/6/5/055010 ↗
12. Programmed synthesis of magnetic magnesium silicate nanotubes with high adsorption capacities for lead and cadmium ions10.1002/chem.201203986 ↗
13. Thermally stable silicate nanotubes10.1002/ange.200353507 ↗
14. New POSS/magnesium silicate nano-hybrids obtained by chemical or mechanical methods
15. Metal silicate nanotubes with nanostructured walls as superb adsorbents for uranyl ions and lead ions in water10.1039/c2jm33178k ↗
16. Electrospinning synthesis and luminescence properties of one-dimensional Zn2SiO4: Mn2+ microfibers and microbelts
17. First preparation of nanocrystalline zinc silicate by chemical vapor synthesis using an organometallic single‐source precursor10.1002/chem.200305397 ↗
18. Diffusion‐facilitated fabrication of gold‐decorated Zn2SiO4 nanotubes by a one‐step solid‐state reaction10.1002/anie.200906022 ↗
19. Synthesis, characterization, and catalytic activity of nitridated magnesium silicate catalysts
20. Evaluation of the physico-chemical properties of an amorphous magnesium silicate synthesized by an ultrasound-assisted precipitation
21. Influence of precipitation parameters on physiochemical properties of magnesium silicates
22. Physical and adsorptive characterization of precipitated magnesium silicate from rice hull ash silica10.1002/ceat.201000478 ↗
23. Surface and catalytic properties of lanthanum-promotedNi/sepiolite catalysts for styrene hydrogenation10.1006/jcat.1996.0074 ↗
24. In situ SAXS studies of the structural changes of sepiolite clay and sepiolite–carbon composites with temperature10.1021/cm010627w ↗
25. Influence of surface modification on morphology and physicochemical parameters of synthetic magnesium silicate
26. Physicochemical studies on precipitated magnesium silicates10.1007/s10853-006-0464-2 ↗
27. Low temperature synthesis of nanocrystalline calcium aluminate compounds with surfactant-assisted precipitation method10.1016/j.apt.2013.07.011 ↗
28. Nickel catalyst supported on magnesium oxide with high surface area and plate-like shape: a highly stable and active catalyst in methane reforming with carbon dioxide10.1016/j.catcom.2011.03.013 ↗
29. Natural gas storage in microporous carbon obtained from waste of the olive oil production10.1590/S1516-14392008000400005 ↗
30. Controlled synthesis and tunable properties of ultrathin silica nanotubes through spontaneous polycondensation on polyamine fibrils10.3762/bjnano.4.90 ↗
31. Preparation of highly active nickel catalysts supported on mesoporous nanocrystalline γ-Al2O3 for CO2 methanation10.1016/j.jiec.2013.07.017 ↗
32. COx free hydrogen production by catalytic decomposition of methane over porous Ni/Al2O3 catalysts
33. CO2 reforming of CH4 over nanocrystalline zirconia-supported nickel catalysts10.1016/j.apcatb.2007.08.004 ↗
34. Aluminum-pillaring of a montmorillonitic clay: textural properties as a function of the starting mineral particle size
35. Effects of hydrothermal temperature and time on the photocatalytic activity and microstructures of bimodal mesoporous TiO2 powders10.1016/j.apcatb.2006.06.022 ↗
36. Synthesis of solid acid catalysts based on TiO2– SO42- and Pt/TiO2− SO42- applied in n-hexane isomerization