Electrophoretic deposition and sintering of a nanostructured manganese–cobalt spinel coating for solid oxide fuel cell interconnects
Source abstract
Abstract
Abstract Solid oxide fuel cell (SOFC) is one of the promising candidates for clean energy production. Due to the high operating temperature of SOFCs, a protective coating is commonly applied on the surface of interconnects to prevent oxidation. In this study, electrophoretic deposition was employed to prepare a manganese–cobalt spinel coating on ferritic stainless steel (AISISAE430) substrates. Nanostructured MnCo 2 O 4 powder with an average crystallite size of 60 nm was utilized and the sintering behavior of the coatings at different temperatures was studied. Non-isothermal and isothermal sintering behavior of the powder were examined by employing a sensitive dilatometer. Master sintering curve of the spinel powder was also established. The activation energy of sintering was determined to be 513±13 kJ mol −1 . Finally, the oxidation behavior and electrical properties of the prepared specimens were studied. Improved oxidation resistance and better electrical conductivity of the stainless steel substrate were attained in the presence of electrophoretic deposited MnCo 2 O 4 coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Electrical contacts between cathodes and metallic interconnects in solid oxide fuel cells10.1016/j.jpowsour.2005.05.010 ↗
2. Cu doped Mn–Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications10.1016/j.ssi.2010.05.052 ↗
3. Determination of interfacial adhesion strength between oxide scale and substrate for metallic SOFC interconnects10.1016/j.jpowsour.2007.10.027 ↗
4. Electrodeposited cobalt coating on Crofer22APU steels for interconnect applications in solid oxide fuel cells10.1016/j.ssi.2010.03.010 ↗
5. A promising NiCo2O4 protective coating for metallic interconnects of solid oxide fuel cells10.1016/j.jpowsour.2010.05.031 ↗
6. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
7. Development of MnCoO coating with new aluminizing process for planar SOFC stacks10.1016/j.ijhydene.2010.04.110 ↗
8. Evaluation of Haynes 242 alloy as SOFC interconnect material10.1016/j.ssi.2005.12.004 ↗
9. Electrical and microstructural characterization of spinel phases as potential coatings for SOFC metallic interconnects10.1016/j.jpowsour.2005.03.137 ↗
10. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
11. Structure and conductivity of thermally grown scales on ferritic Fe–Cr–Mn steel for SOFC interconnect applications10.1149/1.1797031 ↗
12. Dense spinel MnCo2O4 film coating by aerosol deposition on ferritic steel alloy for protection of chromic evaporation and low-conductivity scale formation10.1007/s10853-008-3132-x ↗
13. Performance evaluation of several commercial alloys in a reducing environment10.1016/j.jpowsour.2007.12.067 ↗
14. Effect of slurry-coated LaSrMnO3 on the electrical property of Fe–Cr alloy for metallic interconnect of SOFC10.1016/j.ssi.2004.07.032 ↗
15. Evaluation of SmCo and SmCoN magnetron sputtering coatings for SOFC interconnect applications10.1016/j.jpowsour.2007.09.105 ↗
16. Oxidation resistance and electrical properties of anodically electrodeposited Mn–Co oxide coatings for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2008.09.114 ↗
17. athode materials for solid oxide fuel cells: a review10.1007/s10008-009-0932-0 ↗
18. Electrophoretic deposition of (Mn, Co)3O4 spinel coating for solid oxide fuel cell interconnects10.1016/j.jpowsour.2011.05.053 ↗
19. (Mn, Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications10.1016/j.ijhydene.2006.08.048 ↗
20. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
21. Electrophoretic deposition of functionally-graded NiO–YSZ composite films10.1016/j.jeurceramsoc.2013.01.032 ↗
22. Electrophoretic deposition of (Mn, Co)3O4 spinel nano powder on SOFC metallic interconnects10.1016/j.matlet.2012.04.072 ↗
23. Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications10.1016/j.jpowsour.2010.10.036 ↗
24. High-temperature oxidation process analysis of MnCo2O4 coating on Fe–21Cr alloy10.1016/j.ijhydene.2011.01.130 ↗
25. Densification kinetics of ZrO2-based ceramics using a master sintering curve10.1016/j.jallcom.2009.11.080 ↗
26. Master sintering curves of a nanoscale 3Y TZP powder compacts10.1016/j.ceramint.2008.01.008 ↗
27. Development of a master sintering curve for ThO210.1016/j.jnucmat.2004.02.007 ↗
28. Rahaman · 2003
29. The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect10.1007/s11434-010-3161-0 ↗
30. EPD kinetics: a review10.1016/j.jeurceramsoc.2009.08.022 ↗
31. Formation of a deposit by electrophoresis10.1039/tf9403500279 ↗
32. Estimate of the activation energies for boundary diffusion from rate‐controlled sintering of pure alumina, and alumina doped with zirconia or titania10.1111/j.1151-2916.1990.tb05175.x ↗