Synthesis and characterization of Ba1−xSrxTiO3 nanopowders by citric acid gel method
Source abstract
Abstract
Abstract Stoichiometric and monophasic Ba 1− x Sr x TiO 3 ( x = 0.3) nanopowders were successfully prepared by the citric acid gel method using barium nitrate, strontium nitrate and tetra- n -butyl titanate as Ba, Sr, Ti sources and citric acid as complexing reagent. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), infrared (IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the thermal decomposition behavior, the crystallization process and the particle size and morphology of the calcined powders. The results indicated that single-phase and well-crystallized Ba 1− x Sr x TiO 3 ( x = 0.3) nanopowders with particle size around 80 nm could be obtained after calcining the dried gel at 950 °C for 2 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Porous behavior and dielectric properties of barium strontium titanate synthesized by sol–gel method in the presence of triethanolamine10.1021/cm000041u ↗
2. Synthesis of nanopowders of (Ba1−xSrx)TiO310.1016/S0167-577X(02)00684-5 ↗
3. Low temperature sintering of BaxSr1−xTiO3 glass-ceramic10.1016/j.ceramint.2003.12.130 ↗
4. Synthesis and humidity sensitive properties of nanocrystalline Ba1−xSrxTiO3 thick films10.1016/S0254-0584(97)01938-X ↗
5. Microwave synthesis and sintering of Ba0.95Sr0.05TiO310.1016/S0167-577X(02)00648-1 ↗
6. Dielectric behavior of Ba0.95Sr0.05TiO3 ceramics sintered by microwave10.1016/S0921-5107(02)00159-9 ↗
7. Nonaqueous and hilide-free route to crystalline BaTiO3, SrTiO3, and (Ba,Sr)TiO3 nanoparticles via a mechanism involving C–C bond formation10.1021/ja0494959 ↗
8. Simple chemical route for the quantitative precipitation of barium-strontium titanyl oxalate precursor leading to Ba1−xSrxTiO3 powders10.1016/S0167-577X(02)01091-1 ↗
9. The dependence of dielectric properties on compositional variation for tunable device applications10.1016/j.mechmat.2003.04.001 ↗
10. Low-temperature preparation of (Ba,Sr)TiO3 perovskite phase by sol–gel method10.1023/A:1008773423682 ↗
11. BST powder with sol–gel process in tape casting and firing10.1016/S0955-2219(03)00427-8 ↗
12. Synthesis of (Bi,La)4Ti3O12 by a new aqueous solution-gel route10.1016/S0955-2219(03)00420-5 ↗
13. Sol–gel synthesis of free-standing ferroelectric lead zirconate titanate nanoparticles10.1021/ja001893y ↗
14. Sol–gel synthesis and spark plasma sintering of Ba0.5Sr0.5TiO310.1016/S0167-577X(04)00135-1 ↗
15. Mechanisms of phase separation in gel-based synthesis of multicomponent metal oxides10.1016/S0920-5861(96)00160-5 ↗
16. Synthesis and piezoelectric and ferroelectric properties of (Na0.5Bi0.5)1−xBaxTiO3 ceramics10.1016/j.matchemphys.2004.10.018 ↗
17. Ba0.5Sr0.5TiO3 dielectric materials prepared by citrate-nitrate combustion
18. Nyquist · 1971
19. Preparation of La(Zn0.5Ti0.5)O3 powders via citric acid precursor10.1016/j.matlet.2005.02.025 ↗
20. Synthesis of La(Ma1/2Ti1/2)O3 via citric acid precursor10.1016/j.matchemphys.2005.01.014 ↗
21. Chemical and microstructural properties of TiO2 synthesized by sol–gel procedure10.1016/S0921-5107(96)02041-7 ↗
22. Planar microwave integrated phase-shifter design with high purity ferroelectric material10.1109/22.588610 ↗