Microstructure and mechanical properties of dental 3Y-TZP ceramics by using CaO–P2O5 glass as additive
Source abstract
Abstract
Abstract This study investigated the effects of glass frits on the sintering and mechanical properties of dental 3Y-TZP ceramics. The glass frits, which consisted of MgO, CaO, Al 2 O 3 , SiO 2 , and P 2 O 5 , were selected to lower the sintering temperature of zirconia via liquid phase sintering. The results of the experiment showed that these glass frit additives neither destroy the stability of the high temperature t-phase nor induce grain growth. All the mechanical properties and the relative densities were strongly correlated with the addition of glass frits. At lower sintering temperatures, the presence of glass additives resulted in an increase in mechanical properties. At higher sintering temperatures, the presence of glass additives decreased the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure10.1016/S0109-5641(01)00095-1 ↗
2. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic10.1016/S0109-5641(99)00070-6 ↗
3. Flexural and shear strengths of ZrO2 and a high-noble alloy bonded to their corresponding porcelains10.1016/S0022-3913(08)60206-1 ↗
4. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience10.4012/dmj.28.44 ↗
5. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics10.1016/S0300-5712(00)00030-0 ↗
6. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature10.1016/j.prosdent.2004.09.015 ↗
7. Zirconia as a ceramic biomaterial10.1016/S0142-9612(98)00010-6 ↗
8. Martensitic transformations in zirconia ceramics10.2320/matertrans1989.33.318 ↗
9. Transformation toughening. Part 3: experimental observations in the ZrO2–Y2O3 system10.1007/BF00809059 ↗
10. Transformation toughening in ZrO2-containing ceramics10.1111/j.1151-2916.1987.tb04865.x ↗
11. Microstructure and bending strength of 3Y-TZP ceramic by liquid-phase sintering with CAS addition10.1016/S0272-8842(02)00097-4 ↗
12. Effect of the addition of CaO–MgO–SiO2 glass on the sintering and mechanical properties of Al2O3/3Y-TZP composites10.1007/s10853-006-0125-5 ↗
13. Preparation of glass-infiltrated 3Y-TZP/Al2O3/glass composites10.1016/j.matlet.2003.10.062 ↗
14. Low temperature sintering and microwave dielectric properties of Ba3Ti5Nb6O28 with ZnO–B2O3 glass additions for LTCC applications10.1016/j.jeurceramsoc.2006.11.036 ↗
15. Toughened ZrO2 ceramics sintered with a La2O3-rich glass as additive10.1016/j.jmatprotec.2007.08.061 ↗
16. Mechanical properties of Y-TPZ ceramics obtained by liquid phase sintering using bioglass as additive10.1016/j.msea.2007.06.009 ↗
17. An overview of zirconia ceramics: basic properties and clinic applications10.1016/j.jdent.2007.07.008 ↗
18. Effects of Ca/P ratio on the crystallization of MgO–CaO–Al2O3–SiO2–P2O5 glass–ceramics10.2109/jcersj.103.99 ↗
19. Effect of bioglass additions on the sintering of Y-TZP bioceramics10.1016/j.msec.2009.03.006 ↗
20. Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering10.1016/j.jeurceramsoc.2008.04.030 ↗
21. Diffusion-limited crystal growth in silicate systems: similarity with high-pressure liquid-phase sintering10.1016/S0022-0248(99)00841-6 ↗
22. ISO 6872, Dentistry-Ceramic materials, 2008.