Optimisation of spray-mist-assisted laser machining of micro-structures on CVD diamond coating surfaces
Source abstract
Abstract
Abstract In this study, micro-grooves were fabricated on a chemical vapour deposition (CVD) diamond coating using spray-mist-assisted laser machining. In this paper, the advantages and characteristics of spray-mist-assisted laser machining are analysed through comparison with other forms of laser machining based on morphology and composition. Meanwhile, the effects of process parameters (laser power, scanning speed, defocusing quantity, air pressure, spray angle, and offset distance) on the machining characteristics were investigated using the Taguchi method, and the optimal parameter range of spray-mist-assisted laser-machined CVD diamond coating was obtained. The results indicate that spray-mist-assisted laser machining can effectively remove the recast layer and ensure the precision and continuity of laser machining. The most significant factor affecting the cross-sectional area of the grooves is laser power, while laser power and scanning speed significantly affect depth-to-width (D/W) ratio of grooves. The spray parameters had no significant effect on the characteristics of ablative grooves because the thickness of the water film formed by spray-wall impingement was relatively thin and stabilised.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Laser Material Processing Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Micro-strip sensors based on CVD diamond10.1016/S0168-9002(00)00620-3 ↗
2. CVD Diamond for High Power Laser Applications10.1117/12.2004422 ↗
3. Infrared absorption of fs-laser textured CVD diamond
4. Large-scale fabrication of lightweight Si/SiC ceramic composite optical mirror10.1016/j.matlet.2003.09.010 ↗
5. Micro CVD Diamond Heat Sink
6. CVD Diamond Films as Wear-Resistant Coatings for Relief Valve Components in the Coal Liquefaction Equipment
7. Precision and micro CVD diamond-coated grinding tools10.1016/j.ijmachtools.2009.10.008 ↗
8. Wear mechanisms of CVD diamond tools for patterning vitrified corundum grinding wheels
9. Precision grinding of a microstructured surface on hard and brittle materials by a microstructured coarse-grained diamond grinding wheel10.1016/j.ceramint.2018.01.243 ↗
10. Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces10.1016/j.ceramint.2018.06.197 ↗
11. Design of binderless grinding wheel with positive rake angle and fabrication used femtosecond laser ablation for grinding soft and brittle crystals
12. Dressing methods of superabrasive grinding wheels: a review10.1016/j.jmapro.2019.06.020 ↗
13. Comparative Study of Remote Fiber Laser and Water-Jet Guided Laser Cutting of Thin Metal Sheets
14. UV laser microprocessing and post chemical etching on ultrathin Al2O3 ceramic substrate10.1016/j.jeurceramsoc.2011.03.034 ↗
15. Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications10.1016/j.jmatprotec.2010.08.015 ↗
16. Droplet assisted laser micromachining of hard ceramics
17. Freeze casting of aqueous alumina slurries with glycerol for porous ceramics10.1016/j.ceramint.2009.09.036 ↗
18. A Comparison of Dry and Underwater Laser Micromachining of Silicon Substrates
19. Underwater-laser drilling of aluminum10.1007/s00170-013-5141-4 ↗
20. Texturing of metallic surfaces for superhydrophobicity by water jet guided laser micro-machining
21. High aspect ratio cutting of metals using water jet guided laser10.1007/s00170-015-7161-8 ↗
22. The experimental investigation of water jet-guided laser cutting of CFRP10.1007/s00170-018-03218-4 ↗
23. Effects of a low-pressure water jet assisting the laser etching of polycrystalline silicon
24. Laser ablation of titanium alloy under a thin and flowing water layer10.1016/j.ijmachtools.2014.10.013 ↗
25. An investigation of hybrid laser-waterjet ablation of silicon substrates10.1016/j.ijmachtools.2012.01.002 ↗
26. Improving laser ablation of zirconia by liquid films: multiple influence of liquids on surface machining and nanoparticle generation10.2961/jlmn.2009.01.0013 ↗
27. Dynamic features of bubble induced by a nanosecond pulse laser in still and flowing water10.1016/j.optlastec.2017.10.019 ↗
28. Water-jet guided laser drilling of SiC reinforced aluminium metal matrix composites10.1177/0021998319848062 ↗
29. Gas shrinking laminar flow for robust high-power waterjet laser processing technology10.1364/OE.378328 ↗
30. Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology10.1016/j.mssp.2017.05.029 ↗
31. Water-Assisted Femtosecond Laser Pulse Ablation of High Aspect Ratio Holes
32. Thin Water Film Assisted Glass Ablation with a Picosecond Laser
33. Increase of efficiency for the XeCl excimer laser ablation of ceramics10.1016/0169-4332(95)00435-1 ↗
34. Water assisted pulsed laser machining of micro-structured surface on CVD diamond coating tools10.1016/j.jmapro.2020.04.066 ↗
35. Drop impact dynamics: splashing, spreading, receding, bouncing10.1146/annurev.fluid.38.050304.092144 ↗
36. Characterization of fluid film produced by an atomization-based cutting fluid spray system during machining10.1115/1.4025012 ↗
37. Temperature and intensity dependence of Yb-fiber laser light absorption in water10.1364/AO.50.006319 ↗
38. Comparative investigation of laser-induced breakdown spectroscopy in bulk water using 532-and 1064-nm lasers
39. XiongJianmin · 2015
40. Theory OF wetting and spreading10.1016/0378-4371(91)90315-4 ↗
41. Laser machining micro-structures on diamond surface with a sub-nanosecond pulsed laser10.1007/s00339-018-1594-5 ↗
42. The influence of the focus position on laser machining and laser micro-structuring monocrystalline diamond surface10.1016/j.optlaseng.2018.01.002 ↗
43. Textured grinding wheels: a review10.1016/j.ijmachtools.2016.07.001 ↗
44. Grinding force modelling for ductile-brittle transition in laser macro-micro-structured grinding of zirconia ceramics10.1016/j.ceramint.2019.06.067 ↗
45. Grinding performance improvement of laser micro-structured silicon nitride ceramics by laser macro-structured diamond wheels10.1016/j.ceramint.2019.09.034 ↗
46. Effect of microstructures with different depth-to-width ratios on surface reflectance and Si solar cell performance10.1109/JPHOTOV.2020.3003777 ↗
47. Effects of width-to-depth ratio on heat transfer coefficient for gap10.1108/HFF-05-2014-0143 ↗
48. Engelmann · 1992 · 93
49. Nanosecond pulsed laser-processing of CVD diamond
50. Fabricating microstructures on CVD diamond film10.1504/IJSURFSE.2012.046842 ↗
51. Fabrication of periodic nanostructures using AFM tip-based nanomachining: combining groove and material pile-up topographies10.1016/j.eng.2018.09.010 ↗
52. Ultrasonic vibration assisted grinding of hard and brittle linear micro-structured surfaces
53. Theoretical and experimental study on hybrid laser and shaped tube electrochemical machining (Laser-STEM) process10.1007/s00170-020-06558-2 ↗
54. Crystallite nanosize effect on the structural transitions of WO3 studied by Raman spectroscopy10.1016/S0022-4596(02)99649-0 ↗
55. High-velocity oxygen-fuel spray parameter optimization of nanostructured WC-10Co-4Cr coatings and sliding wear behavior of the optimized coating10.1016/j.matdes.2013.10.002 ↗
56. A model to predict the ablation width and calculate the ablation threshold of femtosecond laser10.1016/j.apsusc.2018.06.093 ↗
57. The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air10.1016/j.apsusc.2004.03.229 ↗
58. Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method10.1016/j.optlastec.2018.10.030 ↗
59. Numerical analysis of Nd:YAG pulsed laser polishing CVD self-standing diamond film10.3901/CJME.2013.01.121 ↗
60. Investigation of Laser Ablation of CVD Diamond Film
61. Study on femtosecond laser processing characteristics of nano-crystalline CVD diamond coating