journal article·2020-09

Bipolar resistive switching behavior and conduction mechanisms of composite nanostructured TiO2/ZrO2 thin film

Hui-Chuan Liu, Xin-Gui Tang, Qiu-Xiang Liu, Yan-Ping Jiang, Wen-Hua Li, Xiao-Bin Guo, Zhen-Hua Tang

Ceramics International· Volume 46· Issue 13
Publisher page

Abstract

Abstract In this work, TiO2/ZrO2 bilayer thin film was prepared on fluorine doped tin oxide (FTO)/glass substrates by using a simple and low-cost chemical solution deposition method. Reproducible bipolar resistive switching (RS) characteristics in Au/TiO2/ZrO2/FTO/glass devices are reported in this work. TiO2/ZrO2 bilayer thin films prepared in this work shows reversible bipolar resistive switching and unidirectional conduction performances under applying voltage and these special performances of TiO2/ZrO2 bilayer thin films was first reported. Obvious resistive switching performance can be observed after setting a compliance current, the ratio of high/low resistance reached about 100 at a read voltage of +0.1V and −0.1V and the RS properties showed no obvious degradation after 100 successive cycles tests. The resistive switching characteristics of Au/TiO2/ZrO2/FTO/glass device can be explained by electron trapping/detrapping related with the vacancy oxygen defects in TiO2/ZrO2 bilayer thin film layer. According to slope fitting, the main conduction mechanisms of the sample are Ohmic and Space charge limited current mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Ferroelectric and Negative Capacitance Devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Exploring the role of nitrogen incorporation in ZrO2 resistive switching film for enhancing the device performance, J. Alloy10.1016/j.jallcom.2018.10.249 ↗
2. Impact of device area and film thickness on performance of sol-gel processed ZrO2 RRAM10.1109/LED.2018.2820141 ↗
3. Emerging memories: resistive switching mechanisms and current status10.1088/0034-4885/75/7/076502 ↗
4. Resistive switching characteristics of HfO2 thin films on Mica substrates prepared by sol-gel process10.3390/nano9081124 ↗
5. Resistive switching characteristics of amorphous SrTiO3 thin films for resistance random access memory application10.1080/21870764.2019.1625499 ↗
6. Resistive switching characteristics of graphene/NiO/highly ordered pyrolytic graphite resistive random access memory capacitors10.1016/j.jallcom.2018.09.181 ↗
7. The effect of oxygen vacancy on switching mechanism of ZnO resistive switching memory10.1063/1.4976512 ↗
8. Improvement of memristive properties in CuO films with a seed Cu layer10.1063/1.5079876 ↗
9. Self-rectifying resistive switching behavior observed in Al2O3-based resistive switching memory devices with p-AlGaN semiconductor bottom electrode10.1016/j.jallcom.2018.01.345 ↗
10. Conduction mechanism of resistive switching films in MgO memory devices10.1063/1.4712628 ↗
11. Resistive switching behavior in copper doped zinc oxide (ZnO:Cu) thin films studied by using scanning probe microscopy techniques10.1016/j.jallcom.2017.03.169 ↗
12. Local ion irradiation-induced resistive threshold and memory switching in Nb2O5/NbOx films10.1021/am5021149 ↗
13. Effect of p-n interface on resistive switching of NiO/CeO2 thin films10.1016/j.jallcom.2018.04.186 ↗
14. Conversion of two types of bipolar switching induced by the electroforming polarity in Au/NiO/SrTiO3/Pt memory cells, Appl
15. Colossal resistive switching behavior and its physical mechanism of Pt/p-NiO/n-Mg0.6Zn0.4/Pt thin films10.1007/s00339-011-6290-7 ↗
16. Effects of ambient gas pressure on the resistance switching properties of the NiO thin films grown by radio frequency magnetron sputtering10.1143/JJAP.49.121103 ↗
17. Improvement of resistive memory switching in NiO using IrO2
18. Stable resistive switching characteristics of ZrO2-based memory device with low-cost10.1016/j.mee.2017.02.019 ↗
19. Excellent selector performance in engineered Ag/ZrO2:Ag/Pt structure for high-density bipolar RRAM applications10.1063/1.5009717 ↗
20. Study on the electrical conduction mechanism of bipolar resistive switching TiO2 thin films using impedance spectroscopy10.1063/1.3400222 ↗
21. Highly flexible resistive switching memory based on the electronic switching mechanism in the Al/TiO2/Al/Polyimide structure10.1021/acsami.7b16214 ↗
22. Insights to the in influences electroforming process on resistive switching types in Pt/InGaZnO/W memory device10.1016/j.ceramint.2018.08.233 ↗
23. Effect of carrier trapping on the hysteretic current-voltage characteristics in Ag/La0.7Ca0.3MnO3/Pt heterostructures10.1103/PhysRevB.73.245427 ↗
24. Conduction in thin dielectric films10.1088/0022-3727/4/5/202 ↗
25. Field-induced resistive switching based on space-charge-limited current10.1063/1.2430912 ↗
26. Sze · 2007 · 49
27. Electrical transport in solids10.1063/1.2915326 ↗
28. Space‐charge‐limited currents in organic crystals10.1063/1.1728487 ↗