Toward excellent performance of Al2O3-ZrO2 reticulated porous ceramics: New insights based on residual stress
Source abstract
Abstract
Abstract In terms of improving properties of reticulated porous ceramics (RPCs) prepared by polymer sponge replica technique, vacuum infiltration process (VI process) is applied to fabricate Al2O3-ZrO2 RPCs with multi-layered struts. This paper focuses on the effect of additives on the rheological properties of Al2O3-ZrO2 slurry. Furthermore, the influence of the ratio of Al2O3/ZrO2 in slurries on the properties of Al2O3-ZrO2 RPCs are investigated, also the residual stress within the Al2O3-ZrO2 multi-layered struts is systematically explored. The results show that the Al2O3-ZrO2 slurry with 0.2 wt% FS20, 0.3 wt% PVA and 0.6 wt% CMC exhibits excellent rheological behavior. In addition, based on the results of finite element method and experiments, as the RPCs with a large amount of Al2O3 in outer layer the compressive residual stress (tangential direction) will exist in the outer layer and reduce the thermal stress concentration near the surface and the edge of struts, which are beneficial to improve the properties of RPCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Particle-stabilized ultra-low density zirconia toughened alumina foams10.1016/j.jeurceramsoc.2013.03.027 ↗
2. Processing and microstructural characterization of porous alumina-zirconia ceramic using CMC and PVC10.4028/www.scientific.net/MSF.591-593.510 ↗
3. Design and impact resistant analysis of functionally graded Al2O3-ZrO2 ceramic composite10.1016/j.matdes.2015.11.091 ↗
4. Thermal conductivity of porous alumina-zirconia prepared by foam technique for applications in cooling systems of artificial satellites10.4028/www.scientific.net/MSF.636-637.161 ↗
5. Thermal shock resistance of the porous Al2O3/ZrO2 ceramics prepared by gelcasting10.1016/j.materresbull.2007.02.001 ↗
6. Effect of production process parameters on the manufacture and properties of porous ceramic based on Al2O310.1007/s11148-015-9768-6 ↗
7. Improving the properties of ceramic foams by vacuum infiltration process10.1016/j.jeurceramsoc.2010.06.003 ↗
8. Conventional and novel processing methods for cellular ceramics10.1098/rsta.2005.1683 ↗
9. Burnout behavior of ceramic coated open cell polyurethane(PU) sponges10.1016/j.jeurceramsoc.2009.07.025 ↗
10. Highly porous permeable cellular ceramic based on silicon carbide with added mullite10.1007/s11148-018-0139-y ↗
11. Effect of SiC addition on the structure and properties of reticulated porous mullite ceramics10.1016/j.jeurceramsoc.2010.05.005 ↗
12. Highly porous hydroxyapatite scaffolds with elongated pores using stretched polymeric sponges as novel template10.1016/j.matlet.2009.05.017 ↗
13. Surface treatment of templates for fabrication of reticulated porous ceramics10.1111/j.1551-2916.2007.01830.x ↗
14. Relationship between rheological behavior and final structure of Al2O3 and YSZ foams produced by replica10.1155/2012/549508 ↗
15. Rheological characterization of slurries for the preparation of alumina foams via replica technique10.1111/jace.13522 ↗
16. The control of slurry rheology in the processing of reticulated porous ceramics10.1016/S0025-5408(02)00674-8 ↗
17. Effect of recoating slurry viscosity on the properties of reticulated porous silicon carbide ceramics10.1016/j.ceramint.2005.01.008 ↗
18. Preparation of large effective specific surface area reticulate porous ceramics by polymeric foam replication process using recoating technique10.1007/s12598-011-0316-3 ↗
19. Design of alumina-zirconia composites with spatially tailored strength and toughness10.1016/j.jeurceramsoc.2014.09.017 ↗
20. Crack deflection and propagation in layered silicon nitride/boron nitride ceramics10.1111/j.1151-2916.1998.tb02438.x ↗
21. Enhanced mechanical properties of SiC reticulated porous ceramics via adjustment of residual stress within the strut
22. Analysis of residual stresses in thermoelastic multilayer cylinders10.1016/j.jeurceramsoc.2015.12.003 ↗
23. Fabrication of SiC reticulated porous ceramics with multi-layered struts for porous media combustion10.1016/j.ceramint.2016.05.093 ↗
24. Evolution of disturbances on shallow layers of non-newtonian fluids10.1016/S0167-2789(00)00019-1 ↗
25. Mezger · 2010
26. Effect of particle size of fly ash on the properties of lightweight insulation materials10.1016/j.conbuildmat.2016.06.140 ↗
27. Effect of alumina bubble addition on the properties of mullite castables10.1016/j.jallcom.2017.11.065 ↗
28. Processing of porous ceramics
29. Constant pressure blocking filtration law application to powder-law non-Newtonian fluid
30. Synthesis of CMC from palm midrib cellulose as stabilizer and thickening agent in food10.13005/ojc/330162 ↗
31. On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content10.1016/j.ijrmhm.2009.06.001 ↗
32. Influence of residual stresses on the mechanical properties of a layered ceramic composite10.1016/0955-2219(96)00005-2 ↗
33. The role of residual stresses in layered composites of Y-ZrO2 and Al2O310.1016/S0955-2219(98)00189-7 ↗
34. High temperature calorimetry of zirconia: heat capacity and thermodynamics of the monoclinic-tetragonal phase transition10.1016/j.jct.2005.05.002 ↗
35. Toughening and transformation of 14 mol% Ce-TZP and Al2O3/Ce-TZP layered micro-composites10.1023/A:1006622324065 ↗
36. Surface cracking in layers under biaxial, residual compressive stress10.1111/j.1151-2916.1995.tb08668.x ↗