Glass foam of macroporosity using glass waste and sodium hydroxide as the foaming agent
Source abstract
Abstract
Abstract Glass foams using float glass waste and sodium hydroxide were produced. The influence of the sodium hydroxide amount in the foam formulation was studied. Titanium dioxide was used as a strengthening agent. The variations of temperature, heating rate and sintering time were investigated during the synthesis process. Open porosity was estimated using mercury porosimetry. The morphology of the glass foams was evaluated using scanning electron microscopy, phase formation was studied using X-ray diffraction, and chemical composition was estimated using X-ray fluorescence. As a result, glass foams with macroporosity were obtained. Since the glass foams used glass waste as reactant, the results suggest the development of an alternative route for glass recycling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Glass foams
2. Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents10.1016/j.ceramint.2007.10.019 ↗
3. Glass foams from dismantled cathode ray tubes10.1016/j.ceramint.2005.04.019 ↗
4. Preparation of high strength foam glass–ceramics from waste cathode ray tube10.1016/j.matlet.2010.02.006 ↗
5. Preparation of porous Al2O3–ceramics by biotemplating of wood10.1023/B:JOPO.0000038012.58705.c9 ↗
6. Elaboration and characterization of porous granules based on waste glass10.1016/j.powtec.2010.08.038 ↗
7. Improvement in the strut thickness of reticulated porous ceramics10.1111/j.1151-2916.2001.tb00895.x ↗
8. Preparation of a reticulated ceramic using vegetal sponge as templating10.1016/j.ceramint.2008.08.018 ↗
9. Ceramic foams
10. Ceramic foams from preceramic polymers10.1007/s10019-002-0209-z ↗
11. Rice · 1998
12. Effect of heating rate on glass foaming: transition to bulk foam10.1016/j.jnoncrysol.2008.11.007 ↗
13. Toughening and strengthening of glass by Al2O3 platelets10.1007/BF01855614 ↗
14. Microstructural failure modes in three-phase glass syntactic foams10.1007/s10853-006-7601-9 ↗
15. Effect of the technological parameters on the properties of granular porous crystal glass material based on zeolite-bearing rock10.1007/s10717-009-9120-z ↗
16. Influence of heating rate on the microstructure of glass foams10.1177/0734242X10364209 ↗
17. Glass foams for environmental applications10.1016/j.jnoncrysol.2010.04.050 ↗
18. Development of titania coatings on glass foams10.1016/j.conbuildmat.2009.02.019 ↗
19. Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste funnel glasses10.1016/j.matlet.2005.10.046 ↗
20. Comparison between the process–structure–property relationships of silica foams prepared through two different processing routes10.1007/s10853-010-4500-x ↗
21. Conversion of batch to molten glass, I: volume expansion10.1016/j.jnoncrysol.2010.11.102 ↗
22. Cellular anorthite glass–ceramics: synthesis, microstructure and properties10.1111/j.1551-2916.2009.03268.x ↗
23. A phenomenological theory of sintering10.1088/0370-1301/62/12/310 ↗
24. Study of foam glass with high content of fly ash using calcium carbonate as foaming agent10.1016/j.matlet.2012.04.052 ↗
25. Foaming of flat glass cullet using Si3N4 and MnO2 powders10.1016/j.ceramint.2008.10.022 ↗
26. Kinetics of formation of the porous structure in foam glass10.1023/A:1019519727228 ↗
27. Determination of practical properties of heat-insulating foam glass10.1007/s10717-008-9014-5 ↗
28. Inorganic membranes and solid state sciences10.1016/S1293-2558(00)00141-2 ↗
29. German · 1996
30. Fabrication of ceramic components with hierarchical porosity10.1007/s10853-010-4708-9 ↗