journal article·2020-08

The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy

X.Y. Jiao, C.F. Liu, Z.P. Guo, G.D. Tong, S.L. Ma, Y. Bi, Y.F. Zhang, S.M. Xiong

Publisher page

Abstract

Abstract Both microstructural characteristics and fracture behavior of Fe-rich phases in a high-pressure die-cast hypoeutectic Al-Si alloy were investigated. Attention was focused on the morphology and formation mechanism of Fe-rich phases, together with their influence on fracture. Results show that primary Fe-rich phases exhibited in blocky shape precipitated from liquid while secondary Fe-rich phase in a large net shape was distributed along eutectic boundary participating in a ternary eutectic reaction. Through synchrotron X-ray tomography characterization, three Fe-rich phases with different morphologies, i.e., polyhedral shape, fine compact shape and Chinese script-type shape were extracted along the radial direction. Lower slow-shot speed promoted the polyhedral Fe-rich phase to precipitate in slow-shot sleeve while decreased the formation of fine compact and Chinese script-type Fe-rich phases in die cavity. Because of a worse deformation compatibility, polyhedral Fe-rich phases fractured and became stress concentration sources before the failure of the casting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Zhu · Mater. Sci. Eng. A · 2019 · 751 · 9010.1016/j.msea.2019.02.072 ↗
2. Guo · Mater. Des. · 2017 · 117 · 38210.1016/j.matdes.2017.01.009 ↗
3. Wang · Mater. Des. · 2016 · 95 · 54510.1016/j.matdes.2016.01.144 ↗
4. Chen · J. Mater. Sci. Technol. · 2014 · 30 · 13910.1016/j.jmst.2013.04.014 ↗
5. Aguilera-Luna · Mater. Charact. · 2014 · 95 · 21110.1016/j.matchar.2014.06.009 ↗
6. Wang · J. Mater. Sci. Technol. · 2017 · 33 · 123510.1016/j.jmst.2017.07.018 ↗
7. Jiao · J. Mater. Sci. Technol. · 2019 · 35 · 109910.1016/j.jmst.2018.12.005 ↗
8. Wang · Mater. Sci. Eng. A · 2014 · 597 · 37010.1016/j.msea.2014.01.012 ↗
9. Li · J. Mater. Process. Technol. · 2016 · 231 · 110.1016/j.jmatprotec.2015.12.005 ↗
10. Jiao · J. Mater. Process. Technol. · 2019 · 268 · 6310.1016/j.jmatprotec.2019.01.008 ↗
11. Li · Acta Metall. Sin-Engl. · 2016 · 29 · 61910.1007/s40195-016-0430-1 ↗
12. Wang · Mater. Charact. · 2018 · 140 · 17910.1016/j.matchar.2018.04.012 ↗
13. Zhang · Min. Proc. Ext. Met. Rev. · 2012 · 33 · 9910.1080/08827508.2010.542211 ↗
14. Dinnis · Scripta Mater. · 2005 · 53 · 95510.1016/j.scriptamat.2005.06.028 ↗
15. Li · Mater. Sci. Eng. A · 2017 · 689 · 28610.1016/j.msea.2017.02.041 ↗
16. Sha · Mater. Sci. Eng. A · 2012 · 554 · 14210.1016/j.msea.2012.06.026 ↗
17. Školáková · Mater. Des. · 2016 · 107 · 49110.1016/j.matdes.2016.06.069 ↗
18. Becker · Materialia · 2019 · 510.1016/j.mtla.2018.100198 ↗
19. Samuelt · Int. J. Cast Metals Res. · 2000 · 23110.1080/13640461.2000.11819406 ↗
20. Gorny · J. Alloys. Compd. · 2013 · 577 · 10310.1016/j.jallcom.2013.04.139 ↗
21. Terzi · Acta Mater. · 2010 · 58 · 537010.1016/j.actamat.2010.06.012 ↗
22. Yu · Acta Mater. · 2017 · 129 · 19410.1016/j.actamat.2017.02.048 ↗
23. Orozco-González · Rev. Metal. Madrid · 2011 · 47 · 45310.3989/revmetalm.1068 ↗
24. Srivastava · Acta Mater. · 2006 · 54 · 174110.1016/j.actamat.2005.11.039 ↗
25. Wang · Mater. Des. · 2018 · 137 · 17610.1016/j.matdes.2017.09.062 ↗
26. 2013
27. FEI · 2017
28. Li · Mater. Sci. Eng. A · 2016 · 674 · 68710.1016/j.msea.2016.08.039 ↗
29. Chanyathunyaroj · J. Alloys. Compd. · 2017 · 692 · 86510.1016/j.jallcom.2016.09.132 ↗
30. Ji · Mater. Sci. Eng. A · 2013 · 564 · 13010.1016/j.msea.2012.11.095 ↗
31. Yang · Metall. Mater. Trans. A · 2014 · 45A · 397110.1007/s11661-014-2346-6 ↗
32. Li · Mater. Sci. Eng. A · 2016 · 672 · 21610.1016/j.msea.2016.07.009 ↗