Preparation and properties of SiOC ceramic modified carbon fiber needled felt preform composites

Abstract SiOC ceramic modified carbon fiber needled felt preform composites (Cf/SiOC) with densities of 0.4 and 0.7 g/cm3 were prepared by precursor infiltration and pyrolysis (PIP) method using methyltrimethoxysilane (MTMS) and dimethyldimethoxysilane (DMDMS) as precursors. The densification behavior was investigated through scanning electron microscopy (SEM) analysis of microstructure of Cf/SiOC composites undergoing different PIP times. The results indicate that with increase of PIP times, a great amount of SiOC ceramic was introduced into the preform, completely covering on the carbon fibers and occupying the open pores. The thermal performance, mechanical properties, and oxidation resistance of the composites were studied via various tests. The results illustrate that after two-time PIP procedure, thermal conductivities of the composites are 0.41–2.54 and 1.28–4.04 W/(m·K) in z direction and x/y plane, respectively, at RT-1500 °C. The compressive strengths of the composite arrive at 2.1 MPa in z direction and 7.8 MPa in x/y plane, which are almost 3.5 times and 6.5 times, respectively, counterparts of the raw preform. The incorporation of SiOC ceramic can remarkably improve anti-oxidation ability of the composites at 600 °C. The oxidation weight loss is merely 2.1 wt% after 60-min oxidation at 600 °C.