ZnO nanowires decoration on carbon fiber via hydrothermal synthesis for paper-based friction materials with improved friction and wear properties
Source abstract
Abstract
Abstract Two-step growth of ZnO nanowires (NWs) on carbon fiber (CF) surface via hydrothermal synthesis was studied and their application in the preparation of paper-based friction materials by wet-forming process was also investigated. SEM and EDS results showed a dense and uniform ZnO NWs layer with vertical alignment was well established on surface of CFs. UV–vis spectra and XRD characterization further confirmed the formation of ZnO NWs on CFs surface. In comparison with control sample (paper-based friction material containing pristine CFs), the modified sample (paper-based friction material containing modified CFs) exhibited higher and more stable dynamic friction coefficient and greater wear resistance. It was concluded that the CFs@ZnO NWs had excellent tribological properties and was highly promising for wet paper-based friction material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material10.1016/j.triboint.2013.08.003 ↗
2. Shear characteristics of a boundary film for a paper-based wet friction material: friction and real contact area measurement10.1016/j.triboint.2004.08.015 ↗
3. Influence of clutch output shaft inertia and stiffness on the performance of the wet clutch10.1080/10402004.2012.748236 ↗
4. The tribological behaviour of paper friction plates for wet clutch applications investigated on SAE II and pin-on-disc test rigs10.1002/tt.3020090406 ↗
5. Synergetic effect of lubricant additive and reinforcement additive on the tribological behaviors of PEEK-based composites under seawater lubrication10.1080/10402004.2013.779403 ↗
6. Tribological properties of PTFE and PTFE composites at different temperatures10.1080/10402004.2013.812759 ↗
7. Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms10.1016/j.compstruct.2015.04.069 ↗
8. Ultra-high temperature ceramic TaB2-TaC-SiC coating for oxidation protection of SiC-coated carbon/carbon composites10.1016/j.ceramint.2014.02.013 ↗
9. Thermal and mechanical properties of carbon fiber polymer-matrix composites with a 3D thermal conductive pathway10.1016/j.compstruct.2016.04.010 ↗
10. Carbon fiber surface modification by plasma treatment for interface adhesion improvements of aerospace composites10.4028/www.scientific.net/AMR.1135.75 ↗
11. An effective surface modification of carbon fiber for improving the interfacial adhesion of polypropylene composites10.1016/j.matdes.2015.09.100 ↗
12. Chemical modification of carbon fiber surfaces by nitric acid oxidation followed by reaction with tetraethylenepentamine10.1016/S0008-6223(97)89608-X ↗
13. Chemical modification of carbon fiber surfaces10.1016/S0008-6223(01)00180-4 ↗
14. Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab10.1016/j.compstruct.2015.08.082 ↗
15. Modification of carbon fiber by air plasma and its adhesion with BMI resin10.1039/c4ra01835d ↗
16. Influence of γ-ray irradiation on structure and properties of PAN precursor fibers10.1002/pen.24372 ↗
17. Wear resistance and friction coefficient of nano-SiO2 and ash-filled HDPE/lignocellulosic fiber composites
18. High efficient preparation of carbon nanotube-grafted carbon fibers with the improved tensile strength10.1016/j.apsusc.2015.12.189 ↗
19. Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface10.1016/j.compstruct.2016.10.022 ↗
20. Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf10.1016/j.carbon.2015.04.054 ↗
21. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide10.1021/am201757v ↗
22. Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles10.1108/ILT-06-2015-0083 ↗
23. Effect of nanosilica additive particles on both friction and wear performance of mild steel/CuSn/SnBi multimaterial system10.1016/j.triboint.2015.04.034 ↗
24. Controlled growth of CuO nanowires on woven carbon fibers and effects on the mechanical properties of woven carbon fiber/polyester composites10.1016/j.compositesa.2014.11.001 ↗
25. Bonding TiO2 array on carbon fabric for outstanding mechanical and wear resistance of carbon fabric/phenolic composite10.1016/j.surfcoat.2017.03.052 ↗
26. ZnO nanowire arrays for enhanced photocurrent in PbS quantum dot solar cells10.1002/adma.201204192 ↗
27. A Au-functionalized ZnO nanowire gas sensor for detection of benzene and toluene10.1039/c3cp52392f ↗
28. Low-temperature preparation of Ag-doped ZnO nanowire arrays, DFT Study, and application to light-emitting diode10.1021/acsami.5b01496 ↗
29. Enhancing the photocatalytic activity of ZnO nanoparticles for efficient rhodamine B degradation by functionalised graphene nanoplatelets10.1016/j.ceramint.2014.09.023 ↗
30. ZnO nanowire interfaces for high strength multifunctional composites with embedded energy harvesting10.1039/C5EE03181H ↗
31. Role of surface chemistry in adhesion between ZnO nanowires and carbon fibers in hybrid composites10.1021/am302060v ↗
32. Effect of ZnO nanowire morphology on the interfacial strength of nanowire coated carbon fibers10.1016/j.compscitech.2011.02.010 ↗
33. Surface modification of aramid fibers by bio-Inspired poly (dopamine) and epoxy functionalized silane grafting10.1021/am507087p ↗
34. In-situ pull-off of ZnO nanowire from carbon fiber and improvement of interlaminar toughness of hierarchical ZnO nanowire/carbon fiber hydrid composite laminates10.1016/j.carbon.2016.09.002 ↗
35. Sol-gel synthesis of nanosilica-coated para-aramid fibers and their application in the preparation of paper-based friction materials10.1039/C7RA05142E ↗
36. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
37. Self-polymerization of dopamine as a versatile and robust technique to prepare polymer capsules10.1021/cm901293e ↗
38. Single step carbonization and graphitization of highly stabilized PAN fibers10.1016/S0008-6223(97)84653-2 ↗
39. Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization10.1007/s10853-008-2633-y ↗
40. A controllable interface performance through varying ZnO nanowires dimensions on the carbon fibers10.1016/j.apsusc.2016.07.092 ↗
41. Catalyst free growth of ZnO nanowires on graphene and graphene oxide and its enhanced photoluminescence and photoresponse10.1088/0957-4484/26/14/145601 ↗
42. Near UV LEDs made with in situ doped p-n homojunction ZnO nanowire arrays10.1021/nl101907h ↗
43. Conversion of ZnO nanowires into nanotubes with tailored dimensions10.1021/cm801131t ↗
44. Effects of carbon fiber length on the tribological properties of paper-based friction materials10.1016/j.triboint.2013.12.017 ↗
45. Parametric analysis for a paper-based wet clutch with groove consideration10.1016/j.triboint.2014.06.023 ↗
46. Effect of carbon fiber content on the friction and wear performance of paper-based friction materials10.1016/j.triboint.2015.02.019 ↗
47. Thermal ageing degradation mechanisms on compressive behavior of 3-D braided composites in experimental and numerical study10.1016/j.compstruct.2016.01.029 ↗
48. Experimental investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluids10.1016/j.applthermaleng.2014.10.071 ↗