Miniaturization of a longitudinal–bending hybrid linear ultrasonic motor
Source abstract
Abstract
Abstract Based on the bonded-type structure, miniaturization of a longitudinal–bending hybrid linear ultrasonic motor is carried out. In this new design, only two pieces of ceramic plates are employed. The outer electrode surface of each ceramic plate is divided into two equal parts, which are excited by two voltages with phase difference separately. Then, the first longitudinal and fourth bending modes are generated in the motor. Finite element method is adopted to realize the modal degeneration and confirm the final structural parameters of the motor. The vibration modes of the prototype are measured by a scanning laser Doppler vibrometer. The no-load speed and the maximum output force of the prototype are tested to be 487 mm/s and 2.3 N, respectively. The weight of the miniaturized ultrasonic motor is about 8.5 g; its power density is about 1.97 times that of the previous bolt-clamped one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Piezoelectric Actuators and Control · Soft Robotics and Applications · Wireless Power Transfer Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Uchino · 1996
2. Zhao · 2007
3. Chen · 2011
4. A single vibration mode tubular piezoelectric ultrasonic motor10.1109/TUFFC.2011.1905 ↗
5. A cylindrical traveling wave ultrasonic motor using longitudinal and bending composite transducer10.1016/j.sna.2010.06.001 ↗
6. Actuating mechanism and design of a cylindrical traveling wave ultrasonic motor using cantilever type composite transducer10.1371/journal.pone.0010020 ↗
7. A cylindrical traveling wave ultrasonic motor using a circumferential composite transducer10.1109/TUFFC.2011.2097 ↗
8. A high power ultrasonic linear motor using a longitudinal and bending hybrid bolt-clamped Langevin type transducer10.1143/JJAP.40.3773 ↗
9. S.J. Shi, W.S. Chen, J.K. Liu, A high speed ultrasonic linear motor using longitudinal and bending multimode bolt-clamped Langevin type transducer, in: Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation, 2006, pp. 612–617.10.1109/ICMA.2006.257641 ↗
10. S.J. Shi, W.S. Chen, J.K. Liu, T. Xie, Design and fabrication of a linear ultrasonic motor using push-pull type L–B hybrid Langevin transducer with single foot, in: Proceedings of the 2008 IEEE International Ultrasonics Symposium, 2008, pp. 157–160.10.1109/ULTSYM.2008.0038 ↗
11. A novel L–B hybrid Langevin transducer type linear ultrasonic motor with modal coupling reducing configuration10.1080/00150193.2010.485028 ↗
12. A rotary piezoelectric actuator using longitudinal and bending hybrid transducer10.1063/1.4766676 ↗
13. Longitudinal and bending hybrid linear ultrasonic motor using bending PZT elements10.1016/j.ceramint.2012.10.163 ↗
14. A bonded-type linear piezoelectric motor with four feet10.1080/00150193.2013.838089 ↗
15. A square-type rotary ultrasonic motor using longitudinal modes10.1007/s10832-014-9922-4 ↗
16. Miniaturization of a U-shape linear piezoelectric motor with double feet10.1016/j.sna.2014.04.011 ↗
17. A piezoelectric ultrasonic linear micromotor using a slotted stator10.1109/TUFFC.2010.1626 ↗