High-temperature corrosion of silicon carbide ceramics by coal ashes
Source abstract
Abstract
Abstract New high-efficiency gasification reactors with higher temperatures and pressures and with different temperature cycles than previously require new types of refractory linings. Besides the oxide materials currently in use, SiC ceramics show great promise as refractories in the reducing atmospheres found in gasifiers. The behaviour of RSiC and SSiC materials was investigated in a flowing CO/H 2 -containing Ar atmosphere with three different ashes (from basic to strongly acidic) in the temperature range between 1000 °C and 1300 °C. After dwell times of up to 100 h the cross sections of the materials were analysed by SEM and EDS. The results showed the high stability of the materials in all ashes. The porous RSiC materials showed small amounts of infiltration depending on the ash composition, but no destruction of the necks between the SiC grains was observed. Thermodynamic calculations simulating the conditions prevailing in a gasification reactor yielded similar phases to those obtained in the corrosive conditions used in the experiments. Due to the strongly reducing conditions the sulphates in the starting ashes reduced to sulphides of much lower corrosion activity
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. High performance refractories for gasification reactors refractories
2. Wear mechanisms of chromia refractories in slagging gasifiers10.1111/j.1744-7402.2007.02175.x ↗
3. Refractory problems in coal gasification reactors
4. Refractory loss in slagging gasifiers
5. Corrosion resistance of refractories exposed to molten acidic coal-ash slags
6. Investigation of slag containing refractory materials for gasification processes10.1016/j.jeurceramsoc.2012.06.014 ↗
7. Refractories for coal gasification and liquefaction
8. Refractory practice in slagging gasifiers
9. Coal-ash slag attack and corrosion of refractories
10. J. Poirier, L. Colombel, P. Prigent, The corrosion mechanisms of SiC refractory lining in waste incineration plants and in reactors of biomass gasification, in Proceedings of the International Coliquim Reference, 2009, pp. 49–52.
11. 5 Auflage
12. Corrosion behavior of chromium-free ceramics for liquid slag removal in pressurized pulverized coal combustion10.1016/j.jeurceramsoc.2009.03.019 ↗
13. H. Gutte, M. Klinger, TU-BAF, 2012, private communication
14. Zur Haltbarkeit feuerfester Werkstoffe in kommunalen Müllverbrennungsanlagen
15. W. Völker, Bewährte und neue SiC-Feuerfest-Baustoffe für Müllverbrennungsanlagen, in: Proceedings of the 40th International Colloquium on Refractories, Aachen, 1987, pp. 174–175.
16. Korrosionsvorgänge an feuerfesten Werkstoffen in kommunalen Müllverbrennungsanlagen
17. W. Völker, Bewährte und neue SiC-Feuerfest-Baustoffe für Müllverbrennungsanlagen, in: Proceedings of the 40th International Colloquium on Refractories, Aachen, 1987, pp. 174–175.
18. Korrosionsvorgänge an feuerfesten Werkstoffen in kommunalen Müllverbrennungsanlagen
19. Factsage 6.3, Thermfact and GTT-Technology, FactPS database, 2012.
20. M. Fritsch, H. Klemm, M. Herrmann, A. Michaelis, B. Schenk, The water vapour hot gas corrosion of ceramic materials, Ceramic forum international: CFI, Berichte der Deutschen Keramischen Gesellschaft, vol. 87 (11–12) 2007
21. Molten-Salt Corrosion of Silicon Nitride: II, Sodium Sulfate
22. High temperature corrosion of ceramics and refractory materials10.1016/B978-044452787-5.00079-2 ↗