Thermomechanical properties of alumina-filled plasticized polylactic acid: Effect of alumina loading percentage

Abstract Polylactic acid (PLA) is one of the most widely studied renewable and biodegradable polyesters and is expected to replace petrochemical-based synthetic polymers. In this study, we investigated the effect of the alumina volume fraction on the thermal and mechanical properties of polyethylene glycol (PEG)-plasticized PLA. The alumina particles were treated with maleic acid to improve their interaction with the PLA matrix. The field-emission scanning electron microscopy results revealed that the addition of alumina eliminated voids, leading to improved interfacial interactions between the PLA and alumina particles. The thermal conductivity of the neat PLA increased from 0.278 to 0.66 wm−1 k−1 with the addition of 30% alumina, which accounts for 137% increase. The tensile strength and Young's modulus of the neat PLA dropped by 52% and 56%, respectively, on the addition of 15% PEG plasticizer. However, the elongation at break increased from 5.4% to 207%, which was associated with a drop on the glass transition temperature values. The dynamic mechanical analysis results showed a drop in the storage modulus and height of the tan δ peak, revealing the increased flexibility of the composite after the inclusion of the plasticizer. The addition of 30% alumina exhibited a 41.6% increase on the stiffness of the PEG-blended PLA.