Stabilization effects of Al doping for enhanced cycling performances of Li-rich layered oxides
Source abstract
Abstract
Abstract Despite the promising high energy density, Li-rich layered oxides still suffer from capacity fade and voltage decay during prolonged cycling. Doping could be effective in addressing such problems, but current studies pay less attention on rhombohedral phases. To this end, Al incorporated Li 1.14 (Ni 0.136 Co 0.10 Al 0.03 Mn 0.544 )O 2 oxides are investigated. Rietveld refined X-ray diffraction and transmission electron microscope results, along with electrochemical analyses, prove the substitution of Al for Co as well as its influence mainly on rhombohedral components. With slight capacity decreases, Al doped cathodes attain superior cycling performances, presenting a capacity retention up to 94.7% as compared to 81.7% for the pristine ones after 100 cycles. Most importantly, the fatal voltage decay, is alleviated as well through the obstructed formation of spinel-like phases, which are confirmed by the ex-situ XRD and further estimated by Raman spectra. Additionally, interfaces of Al doped electrodes are also somewhat enhanced as indicated by the electrochemical impedance study. These results suggest a notable stabilization effects on host framework in Li-rich layered oxides through manipulations on rhombohedral phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. High-energy 'composite' layered manganese-rich cathode materials via controlling Li2MnO3 phase activation for lithium-ion batteries10.1039/c2cp40745k ↗
2. Direct atomic‐resolution observation of two phases in the Li1. 2Mn0. 567Ni0. 166Co0. 067O2 cathode material for lithium‐ion batteries10.1002/anie.201301236 ↗
3. Influence of Ru substitution on Li-rich 0.55Li2MnO3·0.45LiNi1/3Co1/3Mn1/3O2 cathode for Li-ion batteries10.1016/j.electacta.2012.06.118 ↗
4. Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries10.1039/C5EE03573B ↗
5. Review of the U.S. Department of Energy's "deep dive" effort to understand voltage fade in Li- and Mn-rich cathodes10.1021/acs.accounts.5b00277 ↗
6. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
7. Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction10.1016/j.jpowsour.2012.11.144 ↗
8. Correlation between transition metal ion migration and the voltage ranges of electrochemical process for lithium-rich manganese-based material10.1016/j.jpowsour.2015.01.149 ↗
9. Eliminating voltage decay of lithium-rich Li1.14Mn0.54Ni0.14Co0.14O2 cathodes by controlling the electrochemical process10.1002/chem.201406641 ↗
10. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
11. Unraveling the voltage-fade mechanism in high-energy-density lithium-ion batteries: origin of the tetrahedral cations for spinel conversion10.1021/cm5031415 ↗
12. Mitigation of layered to spinel conversion of a Li-rich layered metal oxide cathode material for Li-ion batteries10.1149/2.040403jes ↗
13. K+-doped Li1.2Mn0.54Co0.13Ni0.13O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries10.1021/am5017649 ↗
14. Ti-substituted Li[Li0.26Mn0.6−xTixNi0.07Co0.07]O2 layered cathode material with improved structural stability and suppressed voltage fading10.1039/C5TA03764F ↗
15. Sn-stabilized Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide as a cathode for advanced lithium-ion batteries10.1039/C5TA03415A ↗
16. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
17. Aluminum and gallium substitution into 0.5Li2MnO3·0.5Li(Ni0.375Mn0.375Co0.25)O2 layered composite and the voltage fade effect10.1149/2.0321503jes ↗
18. Structure and electrochemistry of B doped Li(Li0.2Ni0.13Co0.13Mn0.54)1−xBxO2 as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2016.07.064 ↗
19. Influence of cationic substitutions on the first charge and reversible capacities of lithium-rich layered oxide cathodes10.1039/c3ta11703k ↗
20. Mitigation of layer to spinel conversion of a lithium-rich layered oxide cathode by substitution of Al in a lithium ion battery10.1039/C5RA11665A ↗
21. Smart design of lithium-rich layered oxide cathode compositions with suppressed voltage decay10.1039/c3ta14975g ↗
22. A Li-rich layered cathode material with enhanced structural stability and rate capability for Li-ion batteries10.1149/2.070403jes ↗
23. Al doping for mitigating the capacity fading and voltage decay of layered Li and Mn-rich cathodes for Li-ion batteries10.1002/aenm.201502398 ↗
24. Stability and rate capability of Al substituted lithium-rich high-manganese content oxide materials for Li-ion batteries10.1149/2.044202jes ↗
25. Synthesis and electrochemical performance of lithium-rich cathode material Li[Li0.2Ni0.15Mn0.55Co0.1−xAlx]O210.1016/j.electacta.2016.01.066 ↗
26. A comparative study on the oxidation state of lattice oxygen among Li1.14Ni0.136Co0.136Mn0.544O2, Li2MnO3, LiNi0.5Co0.2Mn0.3O2 and LiCoO2 for the initial charge–discharge10.1039/C5TA02161H ↗
27. Enhanced electrochemical performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for lithium-ion batteries10.1016/j.jpowsour.2016.03.101 ↗
28. Understanding the influence of Mg doping for the stabilization of capacity and higher discharge voltage of Li- and Mn-rich cathodes for Li- ion batteries10.1039/C6CP07383B ↗
29. Manipulating the electronic structure of Li-rich manganese-based oxide using polyanions: towards better electrochemical performance10.1002/adfm.201400436 ↗
30. Effect of morphology and manganese valence on the voltage fade and capacity retention of Li[Li2/12Ni3/12Mn7/12]O210.1021/am504701s ↗
31. , Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
32. Reversible anionic redox chemistry in high-capacity layered-oxide electrodes10.1038/nmat3699 ↗
33. Layered lithium-rich oxide nanoparticles doped with spinel phase: acidic sucrose-assistant synthesis and excellent performance as cathode of lithium ion battery10.1021/acsami.5b10219 ↗
34. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives
35. Probing the degradation mechanism of Li2MnO3 cathode for Li-ion batteries10.1021/cm504257m ↗
36. Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li1.2Ni0.2Mn0.6O2 cathode material for lithium ion batteries10.1021/nl5038598 ↗
37. Raman microspectrometry applied to the study of electrode materials for lithium batteries10.1021/cr800344k ↗
38. Structural analysis of Li2MnO3 and related Li-Mn-O materials10.1149/1.3609849 ↗
39. Synthesis and electrochemical performance of micro-sized Li-rich layered cathode material for Lithium-ion batteries10.1016/j.electacta.2016.06.069 ↗
40. Study of the lithium-rich integrated compound xLi2MnO3·(1-x)LiMO2 (x around 0.5; M= Mn, Ni, Co; 2: 2: 1) and its electrochemical activity as positive electrode in lithium cells10.1149/2.070302jes ↗
41. Investigations on electrochemical behavior and structural stability of Li1.2Mn0.54Ni0.13Co0.13O2 lithium-ion cathodes via in-situ and ex-situ Raman spectroscopy10.1021/jp501777v ↗