Friction and wear behaviour of cemented carbide tool materials sliding against Al2O3 and Si3N4 ceramics under dry condition
Source abstract
Abstract
Abstract To investigate the friction and wear behaviour of YG6 cemented carbide during sliding against Al 2 O 3 and Si 3 N 4 ceramics, the ball-on-disc friction and wear test were carried out under dry condition at different speeds and loads. The friction coefficients were collected by the tribo-tester and the wear rate were calculated based on the wear quality loss. It was shown that friction coefficient was slightly dependent on sliding speeds and loads during sliding against Al 2 O 3 and Si 3 N 4 ceramics. However, the wear rate of cemented carbide was highly dependent on sliding speeds and loads during sliding against Al 2 O 3 ceramics. On the contrast, cemented carbides showed a higher friction coefficient but a lower and constant wear rate during sliding against Si 3 N 4 ceramics. The main wear mechanism of cemented carbide was abrasive wear during against Al 2 O 3 ceramics, but diffusion wear and oxidative wear during against Si 3 N 4 ceramics. The overall understanding of friction and wear behaviour for cemented carbide during sliding against Al 2 O 3 and Si 3 N 4 ceramics under dry condition could widen the application range of cemented carbides and promote the development of high speed dry machining technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Tunneling and Rock Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Wear mechanisms of PVD-coated cutting tools during continuous turning of Ti-6Al-4V alloy10.1016/j.precisioneng.2016.09.018 ↗
2. Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling10.1016/j.triboint.2013.02.035 ↗
3. Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools10.1016/0921-5093(96)10130-1 ↗
4. Tool grinding of end mill cutting tools made from high performance ceramics and cemented carbides10.1016/j.cirp.2011.03.106 ↗
5. Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites10.1016/j.wear.2017.11.015 ↗
6. Micro-blasting effect on fracture resistance of PVD-AlTiN coated cemented carbide cutting tools10.1016/j.surfcoat.2016.07.094 ↗
7. Additive manufacturing of WC-20Co components by 3D gel-printing10.1016/j.ijrmhm.2017.10.005 ↗
8. Investigation on additive manufacturing of tungsten carbide-cobalt by selective laser melting10.1016/j.procir.2015.08.060 ↗
9. Numerical simulation and experimental investigation on friction and wear behaviour of micro-textured cemented carbide in dry sliding against TC4 titanium alloy balls10.1016/j.ijrmhm.2018.02.006 ↗
10. The effect of sliding speed on the wear of steel–tool steel pairs10.1016/j.triboint.2016.01.030 ↗
11. Friction and wear behaviors of Al2O3/TiC micro-nano-composite ceramic sliding against metals and hard materials10.1016/j.ceramint.2015.10.001 ↗
12. Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls10.1016/j.ijrmhm.2016.05.007 ↗
13. Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating10.1016/j.ijrmhm.2017.12.024 ↗
14. Effect of surface texturing on friction properties of WC/Co cemented carbide10.1016/j.matdes.2012.05.012 ↗
15. Friction Characteristics of Impregnated and Non-Impregnated Graphite against Cemented Carbide under Water Lubrication10.1016/j.jmst.2016.06.013 ↗
16. Sliding wear behavior of TiAlN and AlCrN coatings on a unique cemented carbide substrate10.1016/j.ijrmhm.2017.08.003 ↗
17. Friction and wear behaviour of cemented carbides10.1016/j.wear.2003.12.014 ↗
18. Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions10.1016/j.ijmachtools.2008.11.001 ↗
19. Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact10.1016/j.wear.2010.02.029 ↗
20. Cutting performance and life prediction of an Al2O3/TiC micro–nano-composite ceramic tool when machining austenitic stainless steel10.1016/j.ceramint.2015.02.012 ↗
21. Tribo-energetic correlation of tool thermal properties to wear of WC-Co inserts in high speed dry machining of aeronautical grade titanium alloys10.1016/j.wear.2008.04.023 ↗
22. Frictional behavior and wear resistance performance of gradient cermet composite tool materials sliding against hard materials10.1016/j.ceramint.2017.03.096 ↗
23. Tribological characteristics of conventionally sintered TiCN-WC-Ni/Co cermets against cemented carbide10.1016/j.ceramint.2016.09.167 ↗