Hydrothermal-assisted synthesis of surface aluminum-doped LiCoO2 nanobricks for high-rate lithium-ion batteries
Source abstract
Abstract
Abstract LiCoO2 nano-particles precursor was synthesized through a mixed-alkalis (LiOH-NaOH) hydrothermal reaction, and finally sintered into LiCoO2 nanobricks with a sickness of ~300 nm. This LiCoO2 nanobrick cathode delivered a specific capacity of 131.8 mAh g−1 at 1 C between 3.0 and 4.2 V and 90% capacity retention after 100 cycles. Those synthesized LiCoO2 nanobricks were further treated by surface Al3+ doping to achieve much enhanced 4.5 V lithium storage capability and cycling stability. EIS results showed the surface Al3+ doping operation can signification decrease the charge-transfer resistances of the LiCoO2 cathodes for both before and after cyclings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. LixCoO2 (0<X<‒1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
2. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
3. Significant improvement of high voltage cycling behavior AlF3-coated LiCoO2 cathode10.1016/j.elecom.2006.03.040 ↗
4. A reversible and higher-rate Li-O2 battery10.1126/science.1223985 ↗
5. Thermodynamic analysis on energy densities of batteries10.1039/c0ee00777c ↗
6. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
7. Preparation of LiCoO2 concaved cuboctahedra and their electrochemical behavior in lithium-ion battery10.1039/c1dt10228a ↗
8. Nanostructured materials for electrochemical devices10.1002/adma.200800627 ↗
9. Composited Co3O4/Ag with flower-like nanosheets anchored on a porous substrate as a high-performance anode for Li-ion batteries10.1039/C5TA03658E ↗
10. Tailoring the morphology of LiCoO2: a first principles study10.1021/cm9008943 ↗
11. Nano-CuO coated LiCoO2: synthesis, improved cycling stability and good performance at high rates10.1016/j.electacta.2011.04.097 ↗
12. Synthesis and characterization of Mo-doped LiNi0.5Co0.2Mn0.3O2 cathode materials prepared by a hydrothermal process10.1016/j.ceramint.2016.10.038 ↗
13. A comparative study of LiCoO2 polymorphs: structural and electrochemical characterization of O2-, O3-, and O4-type phases10.1021/ic4013922 ↗
14. Rutile-TiO2 nanocoating for a high-rate Li4Ti5O12 anode of a lithium-ion battery10.1021/ja301266w ↗
15. Nanosize effect on high-rate Li-ion intercalation in LiCoO2 electrode10.1021/ja0681927 ↗
16. Annealed NaV3O8 nanowires with good cycling stability as a novel cathode for Na-ion batteries10.1039/c3ta14486k ↗
17. Effect of LiCoO2 cathode nanoparticle size on high rate performance for Li-ion batteries10.1149/1.3111031 ↗
18. Shape control of CoO and LiCoO2 nanocrystals10.1007/s12274-010-1001-9 ↗
19. Flakelike LiCoO2 with exposed {010} facets as a stable cathode material for highly reversible lithium storage10.1021/acsami.5b10977 ↗
20. Environmentally friendly growth of well-developed LiCoO2 crystals for lithium-ion rechargeable batteries using a NaCl flux10.1021/cg100705d ↗
21. Preferred orientation of polycrystalline LiCoO2 films10.1149/1.1393157 ↗
22. LiCoO2 concaved cuboctahedrons from symmetry-controlled topological reactions10.1021/ja104852q ↗
23. Molten salt synthesis and high rate performance of the “desert-rose” form of LiCoO210.1002/adma.200702655 ↗
24. Preparation and characterization of nanometric-sized LiCoO2 cathode materials for lithium batteries by a novel sol-gel method10.1016/j.ceramint.2009.07.011 ↗
25. Enhanced electrochemical performance of Mg-doped LiCoO2 synthesized by a polymer-pyrolysis method10.1016/j.ceramint.2014.03.170 ↗
26. Probing the origin of enhanced stability of “AlPO4” nanoparticle coated LiCoO2 during cycling to high voltages: combined XRD and XPS studies10.1021/cm900862v ↗
27. First in situ observation of the LiCoO2 electrode/electrolyte interface by total-reflection X-ray absorption spectroscopy10.1002/anie.201203910 ↗
28. LiCoO2 degradation behavior in the high-voltage phase transition region and improved reversibility with surface coating10.1149/2.0181701jes ↗
29. Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5V10.1016/j.electacta.2003.10.019 ↗
30. High-capacity cathode material with high voltage for Li-ion batteries10.1002/adma.201705575 ↗
31. LiCoO2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties10.1016/j.ssi.2004.04.003 ↗
32. Electrochemically active LiCoO2 and LiNiO2 made by cationic exchange under hydrothermal conditions10.1149/1.1837424 ↗
33. Synthesis of LiCoO2 by decomposition and intercalation of hydroxides10.1149/1.1838362 ↗
34. Effect of 20°−200°C fabrication temperature on microstructure of hydrothermally prepared LiCoO2 films10.1111/j.1151-2916.2000.tb01641.x ↗
35. Electrochemical and in situ X-Ray diffraction studies of lithium intercalation in LixCoO210.1149/1.2221184 ↗
36. Preparation and electrochemical characterization of LiCoO2 by the emulsion drying method10.1023/A:1004042604318 ↗
37. Mechanism of electrochemical performance decay in LiCoO2 aged at high voltage10.1016/j.electacta.2004.03.048 ↗
38. Conversion of electrodeposited Co(OH)2 to CoOOH and Co3O4, and comparison of their catalytic activity for the oxygen evolution reaction10.1016/j.electacta.2014.04.036 ↗
39. Co3O4-CeO2/C as a highly active electrocatalyst for oxygen reduction reaction in Al-air batteries10.1021/acsami.6b12294 ↗
40. Layered lithium insertion material of LiNi0.5Mn0.5O2: a possible alternative to LiCoO2 for advanced lithium-ion batteries10.1246/cl.2001.744 ↗
41. XPS study on Al2O3- and AlPO4-coated LiCoO2 cathode material for high-capacity Li ion batteries10.1149/1.2789299 ↗
42. Boehmite (γ-AlOOH) by XPS10.1116/1.1247857 ↗
43. Interdiffusion of cations from metal oxide surface coatings into LiCoO2 during sintering10.1021/acs.chemmater.7b01219 ↗
44. Understanding the role of temperature and cathode composition on interface and bulk: optimizing aluminum oxide coatings for Li-ion cathodes10.1021/acsami.7b00595 ↗
45. Mehrer · 2007 · 155
46. Nano-Y2O3-coated LiNi0.5Co0.2Mn0.3O2 cathodes with enhanced electrochemical stability under high cut-off voltage and high temperature10.1016/j.ceramint.2017.06.028 ↗
47. Fabricating hexagonal Al-doped LiCoO2 nanomeshes based on crystal-mismatch strategy for ultrafast lithium storage10.1021/acsami.5b06844 ↗