Mechanical properties of SiC/SiC composites fabricated by PIP process with a new precursor polymer
Source abstract
Abstract
Abstract Three dimensional four-directional (3D4d) silicon carbide (SiC) fiber reinforced SiC matrix composites (SiC/SiC) were fabricated by the precursor impregnation and pyrolysis (PIP) process with a new precursor polymer, liquid polycarbosilane with active Si–H and 3CHaCH2 groups (LPVCS). The densification, mechanical properties and microstructure of the SiC/SiC composites were studied. The composite processed with LPVCS exhibited excellent physical and mechanical properties. The density and the porosity of the composites were 2.16 g/cm3 and 6.7%, respectively. The flexural strength of the composites was 619.4 MPa and fracture toughness was 29.1 MPa m1/2. The results indicated that LPVCS was a kind of potential precursor polymer for the preparation of SiC/SiC composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Mechanical properties of 3D KD-1 SiCf/SiC composites with engineered fibre-matrix interfaces10.1016/j.compscitech.2011.01.014 ↗
2. Microstructure, mechanical properties and reaction mechanism of KD-1 SiCf/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration10.1016/j.msea.2010.12.028 ↗
3. Development of silicon carbide fiber-reinforced silicon carbide matrix composites with high performance based on interfacial and microstructure control10.2109/jcersj2.118.82 ↗
4. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
5. HSR/EPM combustor materials development program10.1016/S0921-5093(98)01079-X ↗
6. D. Brewer, G. Ojard, M. Gibler, Ceramic Matrix Composite Combustor Liner Rig Test. ASME Turbo Expo 2000, Munich, Germany, May 8–11, 2000, AMSE Paper 2000-GT-0670.10.1115/2000-GT-0670 ↗
7. Silicon melt infiltrated ceramic composites (HiperComp)
8. Tensile creep and fatigue of Sylramic-iBN melt-infiltrated SiC matrix composites: retained properties, damage development, and failure mechanisms10.1016/j.compscitech.2008.08.028 ↗
9. Sirieix · Composites Science and Technology · 1990 · 37 · 710.1016/0266-3538(90)90089-N ↗
10. Ceramic transactions
11. Preparation and properties of monolithic and composite ceramics produced by polymer pyrolysis
12. Preparation of unidirectionally reinforced carbon-SiC composite by repeated infiltration of polycarbosilane10.2109/jcersj.100.454 ↗
13. Low-temperature processing of ceramic woven fabric/ceramic matrix composites10.1111/j.1151-2916.1994.tb06962.x ↗
14. Fabrication and mechanical properties of 3-dimensional Tyranno fiber reinforced SiC composites by repeated infiltration of polycarbosilane
15. Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC composite10.1016/S0921-5093(03)00206-5 ↗
16. Consolidation of polymer-derived SiC matrix composites: processing and microstructure10.1016/S0266-3538(02)00151-3 ↗
17. High-performance SiC/SiC composites by improved PIP processing with new precursor polymers10.1016/S0022-3115(00)00270-1 ↗
18. Manufacturing SiC-fiber-reinforced SiC matrix composites by improved CVI/slurry infiltration/polymer impregnation and pyrolysis10.1111/j.1551-2916.2004.tb20093.x ↗
19. On the microstructure of three-dimensional braided performs10.1016/S0266-3538(98)00079-7 ↗
20. Synthesis and properies of a liquid polycarbosilane containing allyl groups
21. Wang · 2010