Electrochemical corrosion behavior of carbon steel pipes coated with a protective ceramic layer using plasma and HVOF thermal spray techniques for oil and gas
Source abstract
Abstract
Abstract Ceramic composite Cr 3 C 2 –25%NiCr with high corrosion resistivity (up to 900 °C) is applied on carbon steel (SC45) pipes by two different thermal spray-coating techniques: HVOF and Plasma. These techniques can create dense and homogenously deposited layers without affecting the materials’ properties. The corrosion behavior of coated samples is investigated in crude oil solution at 60 °C and 3.5% NaCl solution at 30 °C for 30 days. Potentiodynamic polarization and EIS results show that the HVOF-coated samples exhibit better corrosion resistance than the plasma-coated samples. However, both coating techniques protect carbon steel from a corrosive environment. XRD and FESEM of the coated samples demonstrate that the solution could not reach the substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Cr3C2–NiCr and WC–Ni thermal spray coatings as alternatives to hard chromium for erosion–corrosion resistance10.1016/j.surfcoat.2007.06.048 ↗
2. Comparative study of Cr3C2–NiCr coatings obtained by HVOF and hard chromium coatings10.1016/j.corsci.2005.10.016 ↗
3. Solid particle erosion of thermal sprayed coatings10.1016/j.wear.2004.03.021 ↗
4. Effect of microstructure on abrasive wear behavior of thermally sprayed WC–10Co–4Cr coatings10.1016/j.wear.2010.02.001 ↗
5. The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel10.1016/j.ceramint.2014.12.102 ↗
6. Electrochemical oxidation of catechol in the presence of thiosemicarbazide10.1149/2.036206jes ↗
7. A sensitive dopamine biosensor based on ultra-thin polypyrrole nanosheets decorated with Pt nanoparticles10.1039/C5RA03521J ↗
8. Tribological role of synovial fluid compositions on artificial joints – a systematic review of the last 10years10.1002/ls.1266 ↗
9. Mechanical properties and features of erosion of cermets10.1016/S0043-1648(01)00737-2 ↗
10. High-temperature behavior of a high-velocity oxy-fuel sprayed Cr3C2–NiCr coating10.1007/s11661-012-1118-4 ↗
11. Effect of types of ceramic materials in aggregated powder on the adhesive strength of high velocity oxy-fuel sprayed cermet coatings10.1016/S0257-8972(01)01303-2 ↗
12. Corrosion and wear studies of Cr3C2NiCr–HVOF coatings sprayed on AA7050 T7 under cooling10.1007/s11666-009-9305-6 ↗
13. Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings10.1016/j.surfcoat.2008.04.017 ↗
14. The role of microstructure in the mechanism of high velocity erosion of Cr3C2–NiCr thermal spray coatings: Part 1 – as-sprayed coatings10.1016/j.surfcoat.2008.10.005 ↗
15. Nitrogen-doped graphene-silver nanodendrites for the non-enzymatic detection of hydrogen peroxide10.1016/j.electacta.2014.11.031 ↗
16. Surface modification of Cr3C2–NiCr cermet coatings by direct diode laser10.1016/j.vacuum.2006.01.070 ↗
17. Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray process10.1016/j.surfcoat.2004.10.136 ↗
18. Engineering HVOF-sprayed Cr3C2–NiCr Coatings: the effect of particle morphology and spraying parameters on the microstructure, properties, and high temperature wear performance10.1007/s11666-012-9833-3 ↗
19. Hot Corrosion Behaviour of Detonation-gun Sprayed Cr3C2–NiCr Coating on Inconel-718 in Molten Salt Environment at 900°C
20. Hot corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on 310S stainless steel in an actual environment of a coal fired boiler10.4028/www.scientific.net/AMR.585.483 ↗
21. A new approach to fabricate TiB2–TiC composite utilizing self-propagation high temperature via pressure less sintering
22. Characterizations and hot corrosion resistance of Cr3C2–NiCr coating on Ni-base superalloys in an aggressive environment10.1361/105996306X147162 ↗
23. Electrochemical behavior of thermally sprayed stainless steel coatings in 3.4% NaCl solution10.1016/j.corsci.2004.07.003 ↗
24. Fabrication of TiB2–TiC composites optimized by different amount of carbon in the initial Ti–BC powder mixture10.4028/www.scientific.net/AMM.315.720 ↗
25. A thermodynamic study on the complex formation between Tris(2-Pyridyl)Methylamine (tpm) with Fe2+, Fe3+, Cu2+ and Cr3+ cations in water – acetonitrile binary solutions using the conductometric method10.1016/S1452-3981(23)14817-6 ↗
26. Solid particle erosion behavior of WC–CoCr nanostructured coating10.1080/10402004.2013.797532 ↗
27. M. Akhtari Zavareh, A.A.D. Sarhan, B. Razak, W.J. Basirun, Electrochemical characterizations of different ceramic composite coatings on carbon steel piping using high velocity oxy-fuel spray, in: Proceedings of the World Congress on Engineering and Computer Science, Vol. II, WCECS, 22–24 October 2014, San Francisco, USA, pp. 664–668
28. Microstructure and cavitation erosion behavior of WC–Co–Cr coating on 1Cr18Ni9Ti stainless steel by HVOF thermal spraying10.1016/j.ijrmhm.2012.01.002 ↗
29. Effect of pressure on structure and properties of lost foam casting of Al–11Si cast alloy
30. Erosion-corrosion behavior of Ni-20Cr plasma coating in actual boiler environment10.1179/1743294414Y.0000000338 ↗