Effect of oscillatory pressure on the sintering behavior of ZrO2 ceramic
Source abstract
Abstract
Abstract Zirconia ceramics were prepared by oscillatory pressure sintering (OPS) and hot pressing (HP). The result revealed that OPS could enhance densification compared to HP when sintering temperature was higher than a critical value. The onset temperature for rapid grain growth was found to be same for both techniques. However, rate of grain growth in OPS was lower than that in HP. Furthermore, the result also showed that samples prepared by OPS exhibited higher hardness than those prepared by HP when sintering temperature was higher than the critical value. The improved hardness was solely due to the higher density of the samples prepared by OPS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. A novel oscillatory pressure-assisted hot pressing for preparation of high performance ceramics10.1111/jace.12869 ↗
2. Microstructure and mechanical properties of zirconia ceramics consolidated by a novel oscillatory pressure sintering10.1016/j.ceramint.2015.04.026 ↗
3. Enhanced properties of pure alumina ceramics by oscillatory pressure sintering10.1016/j.ceramint.2017.12.133 ↗
4. Sintering of aigh-performance silicon nitride ceramics under vibratory pressure10.1111/jace.13486 ↗
5. Microstructure and fracture strength of silicon nitride ceramics consolidated by oscillatory pressure sintering10.1016/j.ceramint.2019.05.079 ↗
6. Improved mechanical properties of Al2O3-25 vol% SiCw composites prepared by oscillatory pressure sintering10.1016/j.ceramint.2017.08.087 ↗
7. A novel approach to improve flexural strength of Al2O3-20 wt% ZrO2 composites by oscillatory pressure sintering10.1111/jace.15341 ↗
8. Microstructure and mechanical properties of ZTA composites fabricated by oscillatory pressure sintering10.1016/j.ceramint.2017.09.204 ↗
9. Enhanced toughness and reliability of Si3N4 -SiCw composites under oscillatory pressure sintering10.1016/j.ceramint.2018.03.270 ↗
10. Oscillating pressure sintering of W–Ni–Fe refractory alloy10.1016/j.jallcom.2019.07.141 ↗
11. An oscillatory pressure sintering of zirconia powder: rapid densification with limited grain growth10.1111/jace.14953 ↗
12. An oscillatory pressure sintering of zirconia powder: densification trajectories and mechanical properties10.1111/jace.15399 ↗
13. Zirconia ceramics consolidated by oscillatory pressure sintering and subsequent carburization10.1016/j.ceramint.2019.01.239 ↗
14. Pressure effects and grain growth kinetics in the consolidation of nanostructured fully stabilized zirconia by pulsed electric current sintering10.1016/j.actamat.2010.05.038 ↗
15. Grain growth in ultrafine-grained Y-TZP ceramics10.1016/S0955-2219(96)00217-8 ↗
16. Grain boundary migration in ceramics
17. Effect of porosity on hardness of Al2O3-Y3Al5O12 ceramic composite10.1016/j.ijrmhm.2014.09.010 ↗