Microstructure and anti-oxidation properties of Yb2Si2O7/SiC bilayer coating for C/SiC composites
Source abstract
Abstract
Abstract A Yb2Si2O7/SiC bilayer anti-oxidation coating was fabricated on the surface of C/SiC composites by the chemical vapor deposition (CVD) and the combination of sol-gel and air spraying method to enhance the oxidation resistance of C/SiC composites. Results indicated that the bilayer coating can efficiently prevent the oxidation of C/SiC composites in ambient air at 1773 K for more than 100 h with slight weight loss rate of 8.12 × 10-5 g cm-2 h-1 and retained compression strength of 96.78%. Microstructure characterization revealed that the gradual densification of Yb2Si2O7 outer coating exposed to 1773 K reduced the oxygen diffusion pathes within the Yb2Si2O7/SiC bilayer coating, therefore, the weight loss rate of specimens decreased as oxidation proceeded. The oxidation activation energy of bilayer coating coated C/SiC specimen was 107.73 kJ/mol during long time oxidation within the temperature range from 1573 K to 1773 K. Based on the microstructure analysis and oxidation behavior of the specimens with different exposure time of oxidation, the oxygen diffusion rate in the bilayer coating was the controlling link during the long time oxidation course.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Oxidation of carbon fiber-reinforced silicon carbide matrix composites at reduced oxygen partial pressures10.1111/j.1551-2916.2010.04376.x ↗
2. Damage analysis of 2.5D C/C-SiC composites subjected to fatigue loadings10.1016/j.jeurceramsoc.2019.01.014 ↗
3. Fatigue behavior and residual strength evolution of 2.5D C/C-SiC composites10.1016/j.jeurceramsoc.2016.07.009 ↗
4. Strength evolution of cyclic loaded LSI-based C/C-SiC composites10.1016/j.ceramint.2016.06.061 ↗
5. Mechanical response and microstructure of 2D carbon fiber reinforced CMCs containing Cu-Si alloy exposed to fatigue stresses10.1016/j.compositesb.2018.10.016 ↗
6. Design,Preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications:A review
7. Microstructural evolution of SiC coating on C/C composites exposed to 1500 °C in ambient air10.1016/j.ceramint.2018.09.255 ↗
8. Thermal cycling behavior and oxidation resistance of SiC whisker-toughened-mullite/SiC coated carbon/carbon composites in burner rig tests10.1016/j.corsci.2016.02.003 ↗
9. LPCVD-based SiO2/SiC multi-layers coating on graphite for improved anti-oxidation at wide-ranged temperatures10.1016/j.compositesb.2018.03.035 ↗
10. Oxidation behavior of Si/mullite/Er2SiO5 new environmental barrier coating at 1350°C
11. Oxidation and thermal shock resistant properties of Si/Yb2SiO5/NdMgAl11O19 coating deposited on Cf/SiC composites10.1016/j.matdes.2016.12.022 ↗
12. A new double layer oxidation resistant coating based on Er2SiO5/LaMgAl11O19 deposited on C/SiC composites by atmospheric plasma spraying10.1016/j.surfcoat.2013.01.011 ↗
13. Coating to protect SiC-coated carbon/carbon composites against oxidation10.1111/j.1551-2916.2009.03144.x ↗
14. Effect of pre-oxidation on the ablation resistance of ZrB2-SiC coating for SiC-coated carbon/carbon composites10.1016/j.ceramint.2014.11.006 ↗
15. A mullite/SiC oxidation protective coating for carbon/carbon composites10.1016/j.jeurceramsoc.2012.08.009 ↗
16. Oxidation behavior of C/C composites with SiC/ZrSiO4-SiO2, coating10.1016/S1003-6326(17)60045-1 ↗
17. Structure design and fabrication of environmental barrier coatings for crack resistance10.1016/j.jeurceramsoc.2013.12.049 ↗
18. Microstructure and oxidation resistant behavior of Er2Si2O7, and Er2Si2O7/LaMgAl11O19, coatings deposited on Cf/SiC composites by APS at 1723K10.1016/j.jallcom.2017.03.108 ↗
19. Microstructure and oxidation resistance of C-AlPO4 -mullite coating prepared by hydrothermal electrophoretic deposition for SiC-C/C composites10.1016/j.ceramint.2012.07.024 ↗
20. Relationship between cracks and microstructures in APS YSZ coatings at elevated temperatures10.1016/j.matchar.2017.07.008 ↗
21. Effects of CMAS penetration on the delamination cracks in EB-PVD thermal barrier coatings with curved interface10.1016/j.ceramint.2017.04.025 ↗
22. The development of CVD mullite coatings for high temperature corrosive applications10.1016/S0257-8972(97)00474-X ↗
23. A mullite oxidation protective coating on SiC coated carbon/carbon composites by hot dipping10.1016/j.ceramint.2016.08.044 ↗
24. Mullite whisker toughened mullite coating to enhance the thermal shock resistance of SiC pre-coated carbon/carbon composites10.1016/j.ceramint.2017.09.035 ↗
25. Microstructure and oxidation behaviors of dense mullite-siliconcarbide-silicon coating for graphite fabricated by dipping-pyrolysis and reactive infiltration10.1016/j.surfcoat.2018.07.041 ↗
26. The influence of calcium-magnesium-aluminosilicate deposits on internal stresses in Yb2Si2O7 multilayer environmental barrier coatings10.1016/j.actamat.2015.12.016 ↗
27. Response of ytterbium disilicate–silicon environmental barrier coatings to thermal cycling in water vapor10.1016/j.actamat.2015.12.053 ↗
28. First-principles investigation on the corrosion resistance of rare earth disilicates in water vapor10.1016/j.jeurceramsoc.2009.02.005 ↗
29. High temperature water vapour corrosion of rare earth disilicates (Y,Yb,Lu)2Si2O7 in the presence of Al(OH)3 impurities10.1016/j.jeurceramsoc.2006.09.013 ↗
30. Synthesis and characterization of β-Yb2Si2O7 powders10.1016/j.ceramint.2013.01.001 ↗
31. Mechanical properties of CVD-SiC coatings with Si impurity10.1016/j.ceramint.2018.08.266 ↗
32. Microstructure and oxidation behavior of a novel bilayer (c-AlPO4–SiCw–mullite)/SiC coating for carbon fiber reinforced CMCs10.1016/j.jeurceramsoc.2019.06.026 ↗
33. Microstructure and oxidation behavior of sol-gel mullite coating on SiC-coated carbon/carbon composites10.1016/j.jeurceramsoc.2015.06.033 ↗