Processing and in vitro bioactivity of high-strength 45S5 glass-ceramic scaffolds for bone regeneration
Source abstract
Abstract
Abstract In this paper, the compressive strength and in vitro bioactivity of sintered 45S5 bioactive glass scaffolds produced by powder technology and polymer foaming were investigated. The sintering temperature of scaffolds was 975 °C. The characterization of scaffolds before immersion in SBF was performed by scanning electron microscopy (SEM) and microtomography (μCT). The scaffolds were also tested for compression, and their density and porosity were measured. After immersion, the samples were observed through SEM and analyzed using EDS, X-ray diffraction (XRD), and infrared spectroscopy (FT-IR). Mass variation was also estimated. The glass-ceramic scaffolds showed a 61.44±3.13% interconnected porosity and an average compressive strength of 13.78±2.43 MPa. They also showed the formation of a hydroxyapatite layer after seven days of immersion in SBF, demonstrating that partial crystallization during sintering did not suppress their bioactivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Glasses with medical applications10.1002/ejic.200390134 ↗
2. Reprint of: review of bioactive glass: from hench to hybrids10.1016/j.actbio.2015.07.019 ↗
3. An overview of the effects of thermal processing on bioactive glasses10.2298/SOS1003307B ↗
4. Sintering, crystallisation and biodegradation behaviour of Bioglass-derived glass-ceramics10.1039/b616539g ↗
5. Bioactive glass scaffolds for bone regeneration10.2113/GSELEMENTS.3.6.393 ↗
6. Processing and characterization of innovative scaffolds for bone tissue engineering10.1007/s10856-012-4622-6 ↗
7. Bioactive glass and glass-ceramic scaffolds for bone tissue engineering10.3390/ma3073867 ↗
8. A porous scaffold for bone tissue engineering/45S5 bioglass-derived porous scaffolds for co-culturing osteoblasts and endothelial cells
9. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
10. Structural characterization and mechanical evaluation of bioactive glass 45S5 foams obtained by a powder technology approach10.1111/j.1551-2916.2012.05465.x ↗
11. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
12. Sintering and crystallization of 45S5 bioglass® powder10.1016/j.jeurceramsoc.2009.06.035 ↗
13. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
14. Porosity and pore size of β-tricalcium phosphate scaffold can influence protein production and osteogenic differentiation of human mesenchymal stem cells: an in vitro and in vivo study10.1016/j.actbio.2008.05.017 ↗
15. Structural transformations of bioactive glass 45S5 with thermal treatments10.1016/j.actamat.2007.01.029 ↗
16. Sintering temperature effects on the in vitro bioactive response of tape cast and sintered bioactive glass-ceramic in tris buffer10.1002/1097-4636(20011215)57:4<532::AID-JBM1199>3.0.CO;2-3 ↗
17. Heat treatment of Na2O-CaO-P2O5-SiO2 bioactive glasses: densification processes and postsintering bioactivity10.1002/jbm.a.33276 ↗
18. Effect of crystallization on apatite-layer formation of bioactive glass 45S510.1002/(SICI)1097-4636(199604)30:4<509::AID-JBM9>3.0.CO;2-T ↗
19. Preparation and bioactivity evaluation of bone-like hydroxyapatite nanopowder10.1016/j.jmatprotec.2007.10.004 ↗
20. Bioactivity modulation of Bioglass® powder by thermal treatment10.1016/j.jeurceramsoc.2012.03.018 ↗
21. Factors affecting the structure and properties of bioactive foam scaffolds for tissue engineering10.1002/jbm.b.10071 ↗
22. Solution effects on the surface reactions of three bioactive glass compositions10.1002/jbm.820271204 ↗
23. Bioceramics10.1111/j.1151-2916.1998.tb02540.x ↗
24. Synthesis, processing and characterization of a bioactive glass composition for bone regeneration10.1016/j.ceramint.2012.09.011 ↗
25. 45S5 Bioglass®-derived glass-ceramic scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.11.025 ↗
26. Materials for bone graft substitutes and osseous tissue regeneration
27. Production of porous hydroxyapatite by the gel-casting of foams and cytoxic evaluation10.1002/(SICI)1097-4636(200004)50:1<27::AID-JBM5>3.0.CO;2-6 ↗
28. Bioactive sol-gel foams for tissue repair10.1002/jbm.1250 ↗
29. Correlation between structure and compressive strength in a reticulated glass-reinforced hydroxyapatite foam
30. In vivo evaluation of hydroxyapatite foams10.1002/jbm.10173 ↗
31. Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods10.1016/S0142-9612(03)00171-6 ↗
32. Biphasic calcium phosphate nanocomposite scaffolds for load bearing bone tissue engineering10.1016/j.biomaterials.2003.12.023 ↗
33. Factors affecting the structure and properties of bioactive foam scaffolds for tissue engineering10.1002/jbm.b.10071 ↗
34. Preparation and characterization of calcium phosphate bone cement
35. Hydroxyapatite porous scaffold engineered with biological polymer hybrid coating for antibiotic vancomycin release
36. Production of bioglass 45S5-polycaprolactone composite scaffolds via salt-leaching10.1016/j.compstruct.2010.01.017 ↗
37. Melt-derived bioactive glass scaffolds produced by a gel-cast foaming technique10.1016/j.actbio.2010.11.041 ↗
38. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability10.1016/j.actbio.2011.03.009 ↗
39. Borophosphate glass-ceramic scaffolds by a sodium silicate bonding process10.1016/j.jnoncrysol.2010.07.068 ↗