Glass foam from the mixture of reservoir sediment and Na2CO3
Source abstract
Abstract
Abstract Glass foams were produced from recycled water reservoir sediment with 10 wt% and 15 wt% Na2CO3 addition, respectively, at calcining temperatures of 750–1050 °C. For the 10 wt% Na2CO3 samples, the pores initially formed on the surface and were sealed by the glassy phase with increasing temperature. The formation of the glassy phase was promoted by the addition of Na2CO3 resulting in foams being obtained at 750 °C with 15 wt% Na2CO3. The increase in temperature from 750 °C to 1050 °C decreased the specific gravity (1.34 to 0.81) and the compressive strength (5.15 MPa to 1.07 MPa), which made the pores inside the foams grow and connect to each other. An excess amount of sodium ions resulted in a flowing glassy phase at high temperature, which made large pores (>1 mm) connect to each other, increasing water adsorption. The mineral phases of the foam were quartz, albite, and nepheline.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate10.1016/j.conbuildmat.2009.08.008 ↗
2. Recycling of harbor sediment as lightweight aggregate10.1016/j.marpolbul.2008.03.033 ↗
3. The foaming of waste glass10.4028/www.scientific.net/KEM.132-136.2264 ↗
4. Glass foams from dismantled cathode ray tubes10.1016/j.ceramint.2005.04.019 ↗
5. Reutilization and stabilization of wastes by the production of glass foams10.1016/j.ceramint.2006.02.010 ↗
6. Lead recovery and the feasibility of foam mass production from funnel glass of dismantled cathode ray tube through pyrovacuum process10.1016/j.jhazmat.2008.04.084 ↗
7. Characterisation of porous glasses prepared from Cathode Ray Tube (CRT)10.1016/j.powtec.2005.12.003 ↗
8. Micro- and macro-cellular sintered glass–ceramics from wastes10.1016/j.jeurceramsoc.2006.10.003 ↗
9. Foaming of flat glass cullet using Si3N4 and MnO2 powders10.1016/j.ceramint.2008.10.022 ↗
10. Elaboration and characterization of foam glass from cathode ray tubes10.1179/174367605X20171 ↗
11. Effects of temperature, reaction time and reducing content on the synthesis of macroporous foam glasses from waste funnel glasses10.1016/j.matlet.2005.10.046 ↗
12. A new expanded material: optimization of the fabrication process
13. New expanded material based on industrial glass. I: effect of the quality of powders and their mixing on properties of the material
14. Relation of chemical process to the bloating clay10.1111/j.1151-2916.1951.tb11619.x ↗
15. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts10.1016/S0032-5910(00)00231-X ↗
16. Relationship between particle size and fracture energy or impact velocity required to fracture as estimated from single particle crushing10.1016/0032-5910(87)80030-X ↗
17. Utilization of lignite power generation residues for the production of lightweight aggregates10.1016/j.jhazmat.2008.06.125 ↗
18. Production of lightweight aggregates from mining residues, heavy metal sludge, and incinerator fly ash10.1016/j.jhazmat.2006.09.094 ↗
19. Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete10.1016/j.conbuildmat.2005.09.009 ↗
20. Effect of SiO2–Al2O3-flux ratio change on the bloating characteristics of lightweight aggregate material produced from recycled sewage sludge10.1016/j.jhazmat.2005.10.035 ↗
21. Ceramic processing of incinerator bottom ash10.1016/S0956-053X(03)00039-4 ↗
22. Assessment of the compositions and components for obtaining foam-glass-crystalline materials from aluminosilicate initial materials10.1007/s10717-009-9133-7 ↗