Preparation of hydrophobic carbon aerogel using cellulose extracted from luffa sponge for adsorption of diesel oil
Source abstract
Abstract
Abstract Carbon aerogel (CA) was prepared using the cellulose extracted from luffa sponge (LS). Trichlorosilane was employed to modify CA to enhance the adsorption capacity for diesel oil. The physical and chemical properties of aerogel, CA and modified CA were analyzed using XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy), FTIR (Fourier Transform infrared spectroscopy), SEM (scanning electron microscope) and TGA/DTG (Thermogravimetric analysis/Derivative Thermogravimetry). Modified carbon aerogel (MCA) had better adsorption capacity for diesel oil (49.62 g/g) than aerogel (5.2 g/g) and CA (32.34 g/g). In addition, the adsorption capacity of MCA for other organics was also investigated, which indicated the abroad application scope for MCA. The reuse method (burning, suction filtration and pyrolysis) for diesel oil adsorption using MCA was investigated and pyrolysis shown the optimal effect for MCA regeneration. The cycle times of MCA for diesel oil adsorption was studied using pyrolysis to regenerate MCA and MCA still had good adsorption capacity for diesel oil (45.14 g/g) in the sixth use. This paper provides a novel strategy for resource utilization of LS and a fast and green method for diesel oil treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A critical review on energy recovery and non-hazardous disposal of oily sludge from petroleum industry by pyrolysis10.1016/j.jhazmat.2020.124706 ↗
2. Effective removal of hazardous pollutants from water and deactivation of water-borne pathogens using multifunctional synthetic adsorbent materials: a review10.1016/j.jclepro.2021.126735 ↗
3. Human health risk assessment of ground water contaminated with petroleum PAHs using Monte Carlo simulations: a case study of an Indian metropolitan city10.1016/j.jenvman.2017.09.078 ↗
4. Remediation of petroleum contaminated saline water using value-added adsorbents derived from waste coconut fibres10.1016/j.chemosphere.2021.130562 ↗
5. Refractory oil wastewater treatment by dissolved air flotation, electrochemical advanced oxidation process, and magnetic biochar integrated system10.1016/j.jwpe.2020.101358 ↗
6. Deep remediation of oil spill based on the dispersion and photocatalytic degradation of biosurfactant-modified TiO210.1016/j.chemosphere.2021.130744 ↗
7. Palm oil mill effluent treatment using a two-stage microbial fuel cells system integrated with immobilized biological aerated filters10.1016/j.biortech.2009.12.017 ↗
8. Electrochemical treatment of sunflower oil refinery wastewater and optimization of the parameters using response surface methodology10.1016/j.chemosphere.2020.126511 ↗
9. Application of an indigenous microorganisms-based fixed-bed GAC-biofilm reactor for passive and sustainable treatment of oil sands process water through combined adsorption and biodegradation processes10.1016/j.chemosphere.2021.130635 ↗
10. Hierarchically tunable structure of polystyrene-based microfiber membranes for separation and selective adsorption of oil-water10.1016/j.apsusc.2020.147400 ↗
11. Synthesis of zeolite-carbon composites using high-carbon fly ash and their adsorption abilities towards petroleum substances10.1016/j.fuel.2020.119173 ↗
12. The influence of clay minerals and surfactants on hydrocarbon removal during the washing of petroleum-contaminated soil10.1016/j.cej.2015.10.006 ↗
13. Adsorptive removal of crude petroleum oil from water using floating pinewood biochar decorated with coconut oil-derived fatty acids10.1016/j.scitotenv.2021.146636 ↗
14. Polycaprolactone/poly(L-lactic acid) composite micro/nanofibrous membrane prepared through solution blow spinning for oil adsorption10.1016/j.matchemphys.2019.122338 ↗
15. Removal of emulsified and dissolved diesel oil from high salinity wastewater by adsorption onto graphene oxide10.1016/j.jece.2019.103106 ↗
16. Crude oil and S500 diesel removal from seawater by polyurethane composites reinforced with palm fiber residues10.1016/j.chemosphere.2020.129288 ↗
17. Energy storage of supercapacitor electrodes on carbon cloth enhanced by graphene oxide aerogel reducing conditions10.1016/j.est.2020.101839 ↗
18. Synthesis of ultralight three-dimensional nitrogen-doped reduced graphene oxide/multi-walled carbon nanotubes/zinc ferrite composite aerogel for highly efficient electromagnetic wave absorption10.1016/j.jcis.2021.03.143 ↗
19. Recycling of waste tire fibers into advanced aerogels for thermal insulation and sound absorption applications10.1016/j.jece.2020.104279 ↗
20. Carbon aerogels for catalysis applications: an overview10.1016/j.carbon.2004.10.022 ↗
21. Morphology controlled carbon aerogel with enhanced thermal insulation and mechanical properties: a simple route for the regulated synthesis10.1016/j.jnoncrysol.2021.120828 ↗
22. A lignin-based carbon aerogel enhanced by graphene oxide and application in oil/water separation10.1016/j.fuel.2020.118376 ↗
23. Carbon-based aerogels and xerogels: synthesis, properties, oil sorption capacities, and DFT simulations10.1016/j.jece.2020.104886 ↗
24. Mechanically strong polyimide aerogels cross-linked with dopamine-functionalized carbon nanotubes for oil absorption10.1016/j.apsusc.2020.148833 ↗
25. Enhanced thermal shrinkage behavior of phenolic-derived carbon aerogel-reinforced by HNTs with superior compressive strength performance10.1016/j.ceramint.2020.10.232 ↗
26. Photothermal hierarchical carbon nanotube/reduced graphene oxide microspherical aerogels with radially orientated microchannels for efficient cleanup of crude oil spills10.1016/j.jcis.2020.02.097 ↗
27. Biotransformation of the antibiotic agent cephadroxyl and the synthetic dye Reactive Black 5 by Leptosphaerulina sp. immobilised on Luffa (Luffa cylindrica) sponge10.1016/j.bcab.2019.101051 ↗
28. Influence of chemical treatment and drying method on the properties of cellulose fibers of luffa sponge10.1016/j.ijbiomac.2021.03.053 ↗
29. Characterization of potential cellulose fiber from Luffa vine: a study on physicochemical and structural properties10.1016/j.ijbiomac.2020.08.098 ↗
30. Fabrication of functional biomass carbon aerogels derived from sisal fibers for application in selenium extraction10.1016/j.fbp.2018.07.004 ↗
31. Carbon aerogel from forestry biomass as a peroxymonosulfate activator for organic contaminants degradation10.1016/j.jhazmat.2021.125438 ↗
32. Effect of pore size and heterogeneous surface on the adsorption of CO2, N2, O2, and Ar on carbon aerogel, RF aerogel, and activated carbons10.1016/j.micromeso.2021.111089 ↗
33. Study on SOI structure irradiated by electron and annealled treatment using C–V, FTIR and PL10.1016/j.spmi.2020.106393 ↗
34. Influence of the addition of organo-montmorillonite nanofiller on cross-linking of polysiloxanes – FTIR studies10.1016/j.saa.2021.119491 ↗
35. Effect of ball milling on cellulose nanoparticles structure obtained from garlic and agave waste10.1016/j.carbpol.2020.117347 ↗
36. Outstanding supercapacitor performance of nitrogen-doped activated carbon derived from shaddock peel10.1016/j.est.2021.102640 ↗
37. Chitosan-derived carbon aerogels with multiscale features for efficient microwave absorption10.1016/j.cej.2021.129781 ↗
38. An XPS study for mechanisms of arsenate adsorption onto a magnetite-doped activated carbon fiber10.1016/j.jcis.2009.11.001 ↗
39. Nitrophenols removal from aqueous solutions by activated carbon – temperature effect of adsorption kinetics and equilibrium10.1016/j.jece.2021.105459 ↗
40. Modification of calcium-rich biochar by loading Si/Mn binary oxide after NaOH activation and its adsorption mechanisms for removal of Cu(II) from aqueous solution10.1016/j.colsurfa.2020.124960 ↗
41. Removal of the antibiotic sulfamethoxazole from environmental water by mesoporous silica-magnetic graphene oxide nanocomposite technology: adsorption characteristics, coadsorption and uptake mechanism10.1016/j.colsurfa.2019.123716 ↗
42. Hydrophobic modification of bagasse cellulose fibers with cationic latex: adsorption kinetics and mechanism10.1016/j.cej.2016.05.022 ↗
43. Comprehensive assessment of oil degradation patterns in petrol and diesel engines observed in a field test with passenger cars – conventional oil analysis and fuel dilution10.1016/j.triboint.2021.107079 ↗
44. Adsorptive desulfurization of diesel oil using nickel nanoparticle-doped activated carbon beads with/without carbon nanofibers: effects of adsorbate size and adsorbent texture10.1016/j.fuel.2016.10.044 ↗
45. Adsorptive desulfurization by activated alumina10.1016/j.jhazmat.2009.05.088 ↗
46. Graphene aerogel prepared through double hydrothermal reduction as high-performance oil adsorbent10.1016/j.mseb.2017.09.014 ↗
47. Novel method to synthesize Ni2P/SBA-15 adsorbents for the adsorptive desulfurization of model diesel fuel10.1016/j.jallcom.2018.02.156 ↗
48. Ultrafast diesel oil spill removal by fibers from silk-cotton tree: characterization and sorption potential evaluation10.1016/j.jclepro.2020.121448 ↗
49. Bottom-up and up-down strategy to obtain the highly porous polystyrene foam for oily water remediation10.1016/j.seppur.2020.118233 ↗