Research and prospect of ceramics for automotive disc-brakes
Source abstract
Abstract
Abstract This article mainly discusses the research status and development trends of ceramics for automotive disc-brakes. According to the ceramic disc-brakes, various properties and characteristics, including fracture toughness, strength, compactness, corrosion resistance, wear resistance, micro-morphology, and thermal stabilities are analyzed. In the field of disc-brakes research, the research directions of the ceramics, including high-temperature performance, bionic structure, layered structure, porous structure, eutectic performance, superhard structure, and machinability are analyzed. The analysis of ceramics is expected to find disc-brake materials in line with the future development trends.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Advanced materials and composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. Alumina-mullite ceramics for structural applications10.1016/j.ceramint.2005.04.001 ↗
2. Advanced ceramic structural materials10.1007/s11148-005-0017-2 ↗
3. Processing and mechanical properties of zirconium diboride-based ceramics prepared by spark plasma sintering10.1111/j.1551-2916.2007.01665.x ↗
4. A study on the mirror-like grinding of MgO single crystal with various diamond wheels10.1016/S0924-0136(97)00121-0 ↗
5. Homogeneous TiB2 ceramics achieved by electric current-assisted self-propagating reaction sintering10.1111/j.1551-2916.2007.01856.x ↗
6. Automotive and industrial applications of structural ceramics in Japan10.1016/j.jeurceramsoc.2007.09.016 ↗
7. The research and development of strengthening and toughening of structure ceramics
8. Concept of functionally graded materials for advanced thermal barrier coating applications10.1111/j.1151-2916.1996.tb08070.x ↗
9. Evaluation of functionally graded thermal barrier coatings fabricated by detonation gun spray technique10.1016/S0257-8972(03)00011-2 ↗
10. Experimental study on heat insulation performance of functionally graded metal/ceramic coatings and their fracture behavior at high surface temperatures10.1016/j.surfcoat.2004.07.069 ↗
11. Effect of the composition profile and density of LPPS sprayed functionally graded coating on the thermal shock resistance10.1016/S1468-6996(03)00023-8 ↗
12. Modelling studies applied to functionally graded materials10.1007/BF01184560 ↗
13. Smart overlay coatings—concept and practice10.1016/S0257-8972(01)01499-2 ↗
14. Evaluation of microwave processed glass-cer-amic coating on nimonic superalloy substrate10.1016/j.ceramint.2009.12.003 ↗
15. Hot corrosion of glass coating on nickel base superalloy10.1016/j.ceramint.2007.03.008 ↗
16. A new high temperature resistant glass-ceramic coating for gas turbine engine components10.1007/BF02708539 ↗
17. Oxidation protection of gamma-titanium aluminide using glass-ceramic coatings10.1016/j.surfcoat.2008.12.029 ↗
18. High speed PVD thermal barrier coatings10.1002/adem.200600049 ↗
19. Recent developments in the field of thermal barrier coatings10.1007/s11666-009-9312-7 ↗
20. Particulate-TiC-hardened steel surfaces by laser melt injection10.1016/0040-6090(80)90352-1 ↗
21. Laser surface alloying of steel with TiC10.1016/0257-8972(91)90249-V ↗
22. Laser surface melting of mild steel with submicronic titanium carbice powders10.1007/BF01151106 ↗
23. Grain refinement of aluminium by TiC, scripta metal
24. Metal-ceramic functionally gradient material produced by laser processing10.1007/BF00356225 ↗
25. Al2O3-FeCrAl Composites and functionally graded materials fabricated by reactive hot pressing10.1016/j.compositesa.2006.02.012 ↗
26. Low-friction behaviour of boundary-lubricated diamond-like carbon coatings containing tungsten10.1016/j.tsf.2004.09.028 ↗
27. A review on nanostructured WC-Co coatings10.1016/S0257-8972(02)00141-X ↗
28. Improved corrosion resistance of Ni-22Cr-13Mo-4W alloy by surface nanocrystallization10.1016/j.matlet.2004.10.047 ↗
29. Friction and surface fracture of a silicon carbide ceramic brake disc tested against a steel pad10.1016/j.jeurceramsoc.2015.07.009 ↗
30. Microstructure and mechanical properties of denal 3Y-TZP ceramics by using CaO-P2O5 glass as additive10.1016/j.ceramint.2010.11.027 ↗
31. Toughening alumina with nickel aluminide inclusions10.1016/S0955-2219(99)00213-7 ↗
32. Fabrication and mechanical properties of SiC platelet reinforced mullite matrix composites10.1016/S0955-2219(98)00269-6 ↗
33. The status quo of research about SiC increase the tenacity of Al2O3 ceramic
34. Toughening behavior in whisker-reinforced ceramic matrix composites10.1111/j.1151-2916.1988.tb05791.x ↗
35. Microstructure and properties of α-FeSi2 modified C/C-SiC brake composites10.1016/j.triboint.2016.05.016 ↗
36. Stiffness and strength of phase transformation ceramics containing misoriented microcracks
37. Chen · 2008
38. Study on preparation and properties of self-toughened silicon nitride ceramics
39. Parameters controlling the synthesis of β-Silicon nitride from silica
40. Microstructural evolution and mechanical properties of Si3N4-SiC(nanoparticle)-Si3N4(whisker) composite10.1557/JMR.2000.0057 ↗
41. Infiltration of SiC preforms with iron silicide melts: microstructures and properties10.1016/S0921-5093(03)00373-3 ↗
42. Survey on wetting of SiC by molten metals10.1016/j.ceramint.2010.01.001 ↗
43. Properties of CuAlO2 ceramics synthesized by solid-phase reaction
44. Friction-induced stick-slip intensified by corrosion of gray iron brake disc10.1016/j.wear.2013.11.008 ↗
45. Effect of CeO2 on corrosion resistance of Al2O3 ceramic coating
46. Wear resistance of cast irons used in brake disc rotors10.1016/S0043-1648(03)00146-7 ↗
47. Full-ceramic brake systems for high performance friction applications10.1016/j.jeurceramsoc.2016.04.040 ↗
48. Tribological examination of unlubricated and graphite-lubricated silicon nitride under traction stress10.1016/0043-1648(88)90077-4 ↗
49. Wear transitions in monolithic alumina and zirconia-alumina composites10.1016/0043-1648(94)07030-X ↗
50. Effects of material properties and testing parameters on wear properties of fine-grain zirconia (TZP)10.1016/S0043-1648(00)00409-9 ↗
51. Bender · 1999 · 61
52. Preparation of zirconium diboride ceramic via liquid precursor route and its characterization
53. Fabrication of carbon nanotubes/Al2O3 ceramic composites by in-situ chemical vapor deposition growth method
54. Thermal analysis of a disc-brake model considering a real brake pad surface and wear
55. Transient temperature field analysis of a brake in a non-axisymmetric three-dimensional model10.1016/S0924-0136(02)00622-2 ↗
56. Influence of wear on thermoelastic instabilities in automotive brakes10.1016/j.wear.2013.09.009 ↗
57. Krenkel · 2003 · 583
58. C/C-SiC composites for advanced friction systems10.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C ↗
59. Preparation of spherical ultrafine zirconia powder in microemulsion system and its dispersibility10.1016/j.ceramint.2003.06.001 ↗
60. Sol-Gel processed TiO2-based nano-sized powders for use in thick-film gas sensors for atmospheric pollutant monitoring10.1023/A:1011236908751 ↗
61. Synthesis and magnetic characterization of zinc ferrite nanoparticles with different environments: powder, colloidal solution, and zinc ferrite-silica core-shell nanoparticles10.1021/la020322b ↗
62. Controlled synthesis of monodispersed CuO nanocrystals10.1088/0957-4484/15/1/007 ↗
63. Formation of monodispersed nano- and micro-particles controlled in size, shape, and internal structure10.1002/ceat.200390048 ↗
64. Low-fired (Zn,Mg)TiO3 microwave dielectrics10.1111/j.1151-2916.1999.tb02268.x ↗
65. Mixture of fuels approach for the solution combustion synthesis of Al2O3-ZrO2 nanocomposite10.1016/j.materresbull.2003.10.005 ↗
66. Aqueous combustion synthesis of strontium-doped lanthanum chromite ceramics10.1111/j.1151-2916.2003.tb03439.x ↗
67. Novel synthesis of layered LiNi1/2Mn1/2O2 as cathode material for lithium rechargeable cells, Electrochim
68. Ultrasonic spray pyrolysis for powder synthesis10.4028/www.scientific.net/SSP.90-91.553 ↗
69. The production of ultrafine zirconium oxide powders by spray pyrolysis10.1023/A:1016549325319 ↗
70. Preparation and properties of barium titanate nanopowder by conventional and high-gravity reactive precipitation methods10.1016/S1359-6462(03)00361-0 ↗
71. Processing of in situ toughened B-W-C composites by reaction hot pressing of B4C and WC10.1016/S1359-6462(00)00502-9 ↗
72. Structure and properties of boron carbide with aluminum incorporation10.1016/S0921-5107(99)00597-8 ↗
73. Sintering of mixtures of seeded bochmite and ultrafine α-Al2O310.1111/j.1151-2916.2000.tb01152.x ↗
74. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
75. First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramics10.1016/j.actamat.2019.03.021 ↗
76. Chung in situ Al-TiB composite obtained by stir casting10.1007/BF01139145 ↗
77. Role of magnesium in cast aluminium alloy matrix composites10.1007/BF00353012 ↗
78. Fabrication of metal matrix composite by spontaneous infiltration and subsequent in situ reaction processes10.4028/www.scientific.net/MSF.217-222.353 ↗
79. Microstructure and properties of in-situ TiC particulate reinforced Al-Si alloy composite
80. Reaction synthesis of Ti3SiC2 from mixture of elemental powders10.2320/matertrans1989.41.605 ↗
81. The fine micro-structure of interface layer for laminated Si3N4 ceramics10.1023/A:1006525704867 ↗
82. Control of composition and structure in laminated silicon nitride/boron nitride composites10.1111/j.1151-2916.2002.tb00480.x ↗
83. Biomimetic structure design-a possible approach to change the brittleness of ceramics in nature10.1016/S0928-4931(00)00133-8 ↗
84. Synthesis and characterization of a remarkable ceramic:Ti3SiC210.1111/j.1151-2916.1996.tb08018.x ↗
85. The MN+1AXN phases: a new class of solids: thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
86. The fabrication and failure of laminar ceramic composites10.1016/0956-7151(92)90471-P ↗
87. Fabrication of porous ceramics with unidirectionally aligned continuous pores10.1111/j.1151-2916.2001.tb00849.x ↗
88. Synthesis of porous Si3N4 ceramics with rod-shaped pore structure10.1111/j.1551-2916.2005.00199.x ↗
89. SiC-ceramics with tailored porosity gradients for combustion chambers
90. Fracture characteristics of Al2O3/YAG composite at room temperature to 2023 K10.1016/j.jeurceramsoc.2005.01.006 ↗
91. Texture control and high-temperature strength of directionally solidified Al2O3/YAG/ZrO2 eutectic composite rods10.2320/matertrans.45.2697 ↗
92. Machinable Al2O3/BN composite ceramics with strong mechanical properties10.1016/S0025-5408(02)00786-9 ↗
93. Microstructure and mechanical properties of machinable Al2O3/LaPO4 composites by hot pressing10.1016/S0272-8842(02)00093-7 ↗