Effect of processing conditions on the structural properties and corrosion behavior of TiO2–SiO2 multilayer coatings derived via the sol-gel method
Source abstract
Abstract
Abstract TiO2–SiO2 multilayer protective coatings were prepared via the sol-gel method on a C45E steel substrate. The influences of the number of layers, annealing temperature and annealing atmosphere on the corrosion resistance were investigated. Electrochemical characterization showed correlations between the processing parameters and the corrosion resistance. A maximum polarization resistance of 61 kΩ cm2 was achieved with coatings of three layers annealed at 900 °C in air compared to just 2 kΩ cm2 for the uncoated C45E steel sample. This research revealed the possibility of preparing a dense corrosion-resistant layer on C45E steel with minimal surface defects by optimizing the processing parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Deposition of self-healing thin films by the sol-gel method: a review of layer-deposition mechanisms and activation of self-healing mechanisms10.1007/s00339-019-2854-8 ↗
2. Surface science engineering through sol-gel process
3. Electrochemical characterization of sol-gel coatings for corrosion protection of metal substrates10.1007/s10971-018-4785-9 ↗
4. Amino acid and TiO2 nanoparticles mixture inserted into sol-gel coatings: an efficient corrosion protection system for AZ91 magnesium alloy10.1016/j.porgcoat.2019.105296 ↗
5. The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anticorrosive properties of alumina films deposited on steel substrate-Part I: single conversion coatings10.1016/j.surfcoat.2019.05.040 ↗
6. Doping engineering of V-TiO2 for its use as corrosion inhibitor
7. Effect of silane coating on the corrosion resistance of TiO2 conversion films10.20964/2018.05.48 ↗
8. Oxidation behavior and corrosion resistance of vacuum annealed ZrN-coated stainless steel10.1016/j.surfcoat.2018.11.054 ↗
9. Ultra-thin multilayered erosion resistant Ti/TiN coatings with stress absorbing layers10.1016/j.apsusc.2019.02.012 ↗
10. TiO2 anti-corrosive thin films on duplex stainless steel grown using cathodic cage plasma deposition10.1016/j.surfcoat.2018.04.074 ↗
11. Corrosion inhibition properties of SiO2-ZrO2 nanocomposite coating on carbon steel 17810.1108/ACMM-12-2015-1618 ↗
12. Quench cooling performance-hardness correlation for AISI 1045 and 1090 steels
13. Raising the corrosion resistance of plasma-nitrided steel 45 (AISI 1045) by preliminary sandblasting10.1007/s11041-019-00360-y ↗
14. The effect of sol-gel boehmite coatings on the corrosion and decarburization of C45 steel10.1007/s10971-018-4664-4 ↗
15. Study of nickel matrix composite coatings deposited from electroless plating bath loaded with TiB2, ZrB2 and TiC particles for improved wear and corrosion resistance10.1016/j.surfcoat.2019.01.060 ↗
16. Atomic layer deposited TiO2 and Al2O3 thin films as coatings for aluminum food packaging application10.3390/ma12040682 ↗
17. Hybrid sol-gel coating incorporated with TiO2 nanosheets and anti-corrosive effects on AA2024-T310.1108/ACMM-08-2018-1980 ↗
18. Preparation of sol-gel SiO2 coatings on steel and their corrosion resistance
19. Nanostructured Ti/TiO2-RuO2-La2O3 anodes prepared by sol-gel process and the effect of electrolyte composition on their stability10.1049/mnl.2018.5566 ↗
20. Corrosion resistance and bioactivity of SiO2-Y2O3 coatings deposited on 316L steel10.1016/j.surfcoat.2018.07.042 ↗
21. The effect of the deposition sequence of sol-gel SiO2-Al2O3, CeO2 and Y2O3 coatings on the corrosion resistance of the FeCrAl alloy during cyclic high-temperature oxidation10.1016/j.surfcoat.2018.03.063 ↗
22. Synthesis and corrosion resistance of SiO2-TiO2-ZrO2-Bi2O3 coatings spin-coated on Ti6Al4V alloy10.1016/j.ceramint.2017.10.161 ↗
23. Fabrication of TiO2-SiO2 bioceramic coatings on Ti alloy and its synergetic effect on biocompatibility and corrosion resistance10.1016/j.jmbbm.2015.02.006 ↗
24. Fabrication of Ni-Al composite coating on stainless steel using hybrid gas-phase coating technique and its corrosion study10.1007/s42452-019-0556-7 ↗
25. Single crystalline-like and nanostructured TiO2 photoanodes for dye sensitized solar cells synthesized by reactive magnetron sputtering at glancing angle10.1021/acs.jpcc.8b07192 ↗
26. Influence of Al2O3 addition on the hardness and in vitro corrosion behavior of laser synthesized Ti-Al2O3 coatings on Ti-6Al-4V10.1007/s00170-018-2785-0 ↗
27. Comparative study on the corrosion and mechanical properties of nano-composite coatings incorporated with TiO2 nano-particles, TiO2 nano-tubes, and ZnO nano-flowers10.1016/j.porgcoat.2016.12.026 ↗
28. Photocatalytic, superhydrophilic, self-cleaning TiO2 coating on cheap, light-weight, flexible polycarbonate substrates10.1016/j.apsusc.2018.07.172 ↗
29. Sol-gel synthesis, characterization and electrochemical corrosion behavior of SNC-doped TiO2 nano coating on copper10.1016/j.molliq.2018.06.056 ↗
30. Surface sedimentation and adherence of Nano‐SiO2 to improve thermal stability and flame resistance of melamine‐formaldehyde foam via sol‐gel method10.1002/fam.2478 ↗
31. Ciprofloxacin‐Loaded ceramic/polymer composite coatings on Ti with improved antibacterial and corrosion resistance properties for orthopedic applications
32. Corrosion stability in salt medium of stainless steel and carbon steel, using different oxide sol gel coatings
33. Characterization of slurry-based mullite coating deposited on P91 steel welds10.1007/s41779-018-0258-4 ↗
34. Protective properties of SiO2 with SiO2 and Al2O3 nanoparticles sol-gel coatings deposited on FeCrAl alloys10.1016/j.ceramint.2018.07.295 ↗
35. Effect of the amount of H2O and HNO3 in Ti (OC3H7i) 4 solutions on the crystallization of sol-gel-derived TiO2 films10.1016/j.tsf.2018.10.050 ↗
36. Corrosion resistance of a self-healing multilayer film based on SiO2 and CeO2 nanoparticles layer-by-layer assembly on Mg alloys10.1016/j.matlet.2018.11.069 ↗
37. Enhanced high temperature oxidation resistance for γ-TiAl alloy with electrodeposited SiO2 film10.1016/j.corsci.2018.05.025 ↗
38. Corrosion protection of a novel SiO2@PANI coating for Q235 carbon steel10.1016/j.porgcoat.2019.03.040 ↗
39. Embedding CuO nanoparticles in PDMS-SiO2 coating to improve antibacterial characteristic and corrosion resistance10.1016/j.colcom.2018.11.002 ↗
40. Characterization of SiO2-TiO2 coatings on 316l stainless steel substrates
41. Al-Mn based coatings deposited by cathodic arc evaporation for corrosion protection of AISI 4140 alloy steel10.1016/j.surfcoat.2019.02.014 ↗
42. Mechanical properties and corrosion resistance of NbTiAlSiZrNx high-entropy films prepared by RF magnetron sputtering10.3390/e21040396 ↗
43. Microstructures and mechanical properties of CoCrFeNiAl0.3 high-entropy alloy thin films by pulsed laser deposition10.1016/j.apsusc.2019.07.186 ↗
44. Superhydrophobic and photocatalytic PDMS/TiO2 coatings with environmental stability and multifunctionality10.1016/j.colsurfa.2018.10.054 ↗
45. Effect of film thickness on humidity sensing of spray deposited TiO2 thin films10.1088/2053-1591/aae970 ↗
46. Structure and corrosion properties of thin TiO2 films obtained by magnetron sputtering10.1016/j.vacuum.2019.03.026 ↗
47. Improved sintering ability of SiC ceramics from SiC@Al2O3 core-shell nanoparticles prepared by a slow precipitation method10.1016/j.ceramint.2019.01.023 ↗
48. Sol-gel process applications: a mini-review10.11605/j.pnrs.201802008 ↗
49. Corrosion resistance of ZrO2 films under different humidity coal gas conditions at high temperature10.1016/j.jallcom.2018.12.322 ↗
50. Corrosion inhibition of mild steel using chitosan/TiO2 nanocomposite coatings10.1016/j.porgcoat.2019.01.025 ↗
51. Influence of multiple coating and heat treatment cycles on the performance of nano-TiO2 coating in protection of 316L stainless steel against corrosion under UV illumination and dark conditions, Iran
52. Facile technique for the immobilisation of TiO2 nanoparticles on glass substrates for applications in the photocatalytic self-cleaning of indoor air pollutants
53. Oxidation resistant TiO2-SiO2 coatings on mild steel by Sol-Gel10.1016/j.surfcoat.2019.125041 ↗
54. Comparison on the TiO2 crystalline phases deposited via dip and spin coating using green sol-gel route10.1016/j.jmrt.2019.04.018 ↗
55. Multilayered ZnO/TiO2 nanostructures as efficient corrosion protection for stainless steel 30410.1088/2053-1591/ab042f ↗
56. Investigation of anticorrosion properties of nanocomposites of spray coated zinc oxide and titanium dioxide thin films on stainless steel (304LSS) in saline environment
57. Effect of deposition temperature on microstructure, corrosion behavior and adhesion strength of Zn-Mg coatings on mild steel10.1016/j.jallcom.2017.12.289 ↗
58. Synergistic effects from super-small sized TiO2 and SiOx nanoparticles within TiO2/SiOx/carbon nanohybrid lithium-ion battery anode10.1016/j.ceramint.2019.04.147 ↗
59. Uniformly embedded cellulose/polypyrrole-TiO2 composite in sol-gel sodium silicate nanoparticles: structural and dielectric properties10.1007/s12633-018-9910-4 ↗
60. Revised pourbaix diagrams for iron at 25–300 C10.1016/S0010-938X(96)00067-4 ↗
61. Effects of repetitive polarization switching on the coercive voltage of Pt/Pb(Zr0.52Ti0.48)O3/Pt thin films analyzed using impedance spectroscopy10.1016/j.cap.2019.02.003 ↗
62. N-doped TiO2@TiO2 visible light active film with stable and efficient photocathodic protection performance10.1016/j.jelechem.2019.05.020 ↗