Effect of A site deficiency of LSM cathode on the electrochemical performance of SOFCs with stabilized zirconia electrolyte
Source abstract
Abstract
Abstract The effect of A site deficiency on the electrochemical performance of a strontium-doped lanthanum manganite (LSM) cathode in an ScSZ electrolyte-supported solid oxide fuel cell (SOFC) was investigated. XRD characterization resulted in a series of (La 0.75 Sr 0.25 ) x MnO 3 (x=1.0, 0.97, 0.95, 0.9 and 0.85) powders, indicating that the Mn 3 O 4 phase precipitated into (LS) x M when the deficiency value was over a certain threshold value. The chemical reaction occurred between stoichiometric LSM and ScSZ due to the high chemical potential of La. An A site deficiency in the LSM can reduce the chemical potential of La and suppress the interfacial reaction between the LSM and ScSZ. The precipitation of Mn 3 O 4 due to a larger A site deficiency leads to the formation of LZO occurring at the A site-deficient (LS) x M and ScSZ. An A site-deficient (LS) x M cathode appears to possess good adhesion with the ScSZ electrolyte and a longer active TPB length after being sintered at 1300 °C. An optimal A site deficiency concentration was considered to exist in the electrochemical performance improvement of the A site-deficient LSM cathode SOFC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
2. Cathode polarizations of a cathode-supported solid oxide fuel cell10.1149/1.3478145 ↗
3. Fabrication of a large area cathode-supported thin electrolyte film for solid oxide fuel cells via tape casting and co-sintering techniques10.1016/j.elecom.2009.02.007 ↗
4. Cathodic characteristics of (La0.6Sr0.4)(Mn1−xMx)O3−δ (M = Co, Ni) for use in a solid oxide fuel cell with a (Ba0.3Sr0.2La0.5)InO2.75 electrolyte10.1016/j.ssi.2006.02.038 ↗
5. Characterization of porous lanthanum strontium manganite (LSM) and development of yttria stabilized zirconia (YSZ) coating10.1016/j.ceramint.2008.11.012 ↗
6. Thermodynamic stabilities of perovskite oxides for electrodes and other electrochemical materials10.1016/0167-2738(92)90090-C ↗
7. Characterization of planer cathode-supported SOFC prepared by a dual dry pressing method10.1016/j.jallcom.2010.10.218 ↗
8. Improving the electrochemical properties of SSZ electrolyte-supported solid oxide fuel cells10.1016/j.ceramint.2014.06.048 ↗
9. Chemical compatibility between strontium-doped lanthanum manganite and yttria-stabilized zirconia10.1111/j.1151-2916.1995.tb08416.x ↗
10. La2Zr2O7 formation and oxygen reduction kinetics of the La0.85Sr0.15MnyO3, O2(g)|YSZ system10.1016/S0167-2738(98)00195-7 ↗
11. Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review10.1007/s10853-008-2966-6 ↗
12. Anode supported solid oxide fuel cells-deconvolution of degradation into cathode and anode contributions10.1149/1.2729105 ↗
13. Chemical degradation of La1−xSrxMnO3/Y2O3-stabilized ZrO2 composite cathodes in the presence of current collector pastes10.1016/j.ssi.2004.06.004 ↗
14. Preparation of nano-crystalline strontium-doped lanthanum manganate (LSM) powder and porous film by aerosol flame deposition10.1016/j.ceramint.2013.10.148 ↗
15. Electrical characterization of lanthanum zirconate reaction layers by impedance spectroscopy10.1016/0167-2738(94)90043-4 ↗
16. LaMnO3 air cathodes containing ZrO2 electrolyte for high temperature solid oxide fuel cells10.1016/0167-2738(92)90161-H ↗
17. Perovskite-type oxides as oxygen electrodes for high temperature oxide fuel cells10.1016/0167-2738(87)90039-7 ↗
18. Thermodynamic analysis of reaction profiles between LaMO3(M=Ni,Co,Mn) and ZrO210.1149/1.2086043 ↗
19. Thermodynamic representation of nonstoichiometric lanthanum manganite10.1016/0167-2738(96)00281-0 ↗
20. Electrical properties of transition-metal-doped YSZ10.1016/0167-2738(92)90409-I ↗
21. Interfacial reaction phenomenon between La0.25Sr0.75TiO3 and ScSZ10.1016/j.jpowsour.2013.07.066 ↗
22. Electrical performance of La-substituted SrTiO3 anode material with different deficiencies in A-site10.1149/05027.0063ecst ↗
23. Effect of interaction between A-site deficient LST and ScSZ on electrochemical performance of SOFC10.1149/2.0131503jes ↗
24. Chemical compatibility of A-site deficient La substituted SrTiO3 anode and stabilized zirconia electrolyte10.1149/06801.1465ecst ↗
25. Understanding materials compatibility10.1146/annurev.matsci.33.022802.093856 ↗
26. Oxygen tracer diffusion coefficient of (La, Sr)MnO3±δ10.1016/0167-2738(96)00287-1 ↗
27. Effect of porous interlayer on the long-term stability of (La0.8Sr0.2)0.97MnO3 cathode for solid oxide fuel cells10.1016/j.jpowsour.2013.02.063 ↗
28. (LaSr)xMnO3 cathode stoichiometry effects on electrochemical performance in contact with AISI 441 steel interconnect10.1016/j.jpowsour.2014.06.051 ↗
29. Performance of cathode-supported SOFC with Ni0.5Cu0.5–CGO anode operated in humidified hydrogen and in low-concentration dry methane10.1007/s10008-011-1615-1 ↗
30. Mass synthesis of high performance (La0.75Sr0.25)0.95MnO3±δ nano-powder prepared via a low-carbon chemical solution method10.1016/j.jpowsour.2013.12.003 ↗
31. Anisotropic thermal and chemical expansion in Sr-substituted LaMnO3+δ: implications for chemical strain relaxation10.1021/cm2030608 ↗
32. Crystal structure and thermal expansion behavior of oxygen stoichiometric lanthanum strontium manganite at high temperature10.1016/j.ssi.2013.12.042 ↗
33. Manganite-zirconia composite cathodes for SOFC: influence of structure and composition10.1016/0013-4686(94)00332-U ↗
34. Chemical reaction mechanism between A-site deficient La substituted SrTiO3 and PH3 in coal syngas10.1149/2.0491512jes ↗