Effects of liquid phases on densification of TiO2-doped Al2O3–ZrO2 composite ceramics
Source abstract
Abstract
Abstract This study investigated the densification behaviors and microstructural evolution of Al 2 O 3 –ZrO 2 (3Y) composite ceramics doped with four different amounts of TiO 2 (0, 1, 4, and 8 wt%; denoted as 0T, 1T, 4T, and 8T, respectively) to clarify the effect of TiO 2 dopants on densification. The shrinkage rate during densification increased with the increase in the amount of TiO 2 . The development of grain boundary feature was also examined. The undoped ceramic showed clean grain boundaries. Thin liquid grain boundary phases were observed in 1T, whereas large liquid phases were found on the grain boundary and at the junction pockets in 4T and 8T. The results were discussed in terms of the relationship between densification and grain boundary feature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Effect of TiO2 addition on the properties of Al2O3–ZrO2 composites prepared by spark plasma sintering10.4303/bda/D110147 ↗
2. Effect of TiO2 addition on the sintering behavior, hardness and fracture toughness of an ultrafine alumina
3. Additives and the sintering of ceramics
4. The kinetics of hot-pressing for undoped and donor-doped BaTiO3 ceramics10.1007/BF00585460 ↗
5. Effect of TiO2 on the initial sintering of Al2O310.1111/j.1151-2916.1972.tb11229.x ↗
6. Complexion: a new concept for kinetic engineering in materials science10.1016/j.actamat.2007.07.029 ↗
7. Multiple grain boundary transitions in ceramics: a case study of alumina10.1016/j.actamat.2007.04.051 ↗
8. Influence of interface energies on solute partitioning mechanisms in doped aluminas10.1016/j.actamat.2010.05.045 ↗
9. Demystifying the role of sintering additives with complexion10.1016/j.jeurceramsoc.2007.12.018 ↗
10. An experimentally quantifiable solute drag factor10.1016/j.actamat.2007.11.042 ↗
11. High temperature plastic flow and grain boundary chemistry in oxide ceramics10.1007/s10853-005-2674-4 ↗
12. Ionic conductivity of tetragonal ZrO2 polycrystal doped with TiO2 and GeO210.1016/j.jeurceramsoc.2008.06.016 ↗
13. Effect of TiO2 on initial sintering of Al2O310.1111/j.1151-2916.1970.tb12055.x ↗
14. 26Al tracer diffusion in titanium doped single crystalline α-Al2O310.1016/j.ssi.2008.03.007 ↗
15. 26Al tracer diffusion in nominally undoped single crystalline a-Al2O310.4028/www.scientific.net/DDF.323-325.75 ↗
16. Preparation and characterization of nano-sized Al2O3/ZrO2 powders
17. Anthony · 1973 · vol. 6[M]
18. The defect chemistry of metal oxides
19. Grain boundary electronic structure related to the hightemperature creep resistance in polycrystalline Al2O310.1016/S1359-6454(02)00122-2 ↗
20. Anisotropic abnormal grain growth in TiO2/SiO2-doped alumina10.1111/j.1151-2916.2000.tb01636.x ↗
21. The solubility limit of TiO2 in the pure ZrO2