Synthesis and characterization of Sb-doped SnO2 with high near-infrared shielding property for energy-efficient windows by a facile dual-titration co-precipitation method
Source abstract
Abstract
Abstract Sb-doped SnO2 (ATO) powders were favorably synthesized using a dual-titration co-precipitation method for the application of energy-efficient windows. A dual-titration co-precipitation method can effectively inhibit the aggregation of primary nanoparticles, which is conducive to prepare stable dispersion applied to glazing materials for blocking part of solar radiation. Various annealing temperatures, doping molar ratios and ethanol content of precursor solution were used to investigate the influence on the morphology and phase composition of the as-synthesized ATO powders. The results illustrated that the reasonable reaction conditions to prepare ATO powders with near-infrared shielding property should be: the doping molar ratio of 10%, the content of ethanol in precursor solution of 100% and the annealing temperature of 1000 °C. Besides, ATO primary nanoparticles were gained ranging from 45 to 55 nm with a low aggregated degree. The ATO coating prepared by the ATO dispersion with 20 wt% demonstrated the optimal selective transmitted spectra, which simultaneously achieved the average visible transmittance of 80.15% but average near-infrared transmittance of 23.31%. In addition, a simulated experiment demonstrated that ATO coated glass exhibited a better near-infrared shielding property than ITO (Sn-doped In2O3) coated glass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Pigment Synthesis and Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Heat-shielding and self-cleaning smart windows: near-infrared reflective photonic crystals with self-healing omniphobicity via layer-by-layer self-assembly10.1021/acsami.8b05887 ↗
2. Preparation and overall energy performance assessment of wide waveband two-component transparent NIR shielding coatings10.1016/j.solmat.2017.04.032 ↗
3. A dual-responsive nanocomposite toward climate-adaptable solar modulation for energy-saving smart windows10.1021/acsami.6b15065 ↗
4. The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot–humid climate10.1016/j.rser.2015.09.055 ↗
5. Transparent nanomaterial-based solar cool coatings: synthesis, morphologies and applications10.1016/j.solener.2019.10.029 ↗
6. Dispersion of Cs0.33WO3 particles for preparing its coatings with higher near infrared shielding properties10.1016/j.apsusc.2014.05.005 ↗
7. Reflectance modulation of transparent multilayer thin films for energy efficient window applications10.1016/j.matlet.2011.05.006 ↗
8. Low-emissivity coating of amorphous diamond-like carbon/Ag-alloy multilayer on glass10.1016/j.apsusc.2004.10.046 ↗
9. Solution processing of transparent conductors: from flask to film10.1039/c1cs15065k ↗
10. New materials for tunable plasmonic colloidal nanocrystals10.1039/C3CS60265F ↗
11. Tunable solar-heat shielding property of transparent films based on mesoporous Sb-doped SnO(2) microspheres10.1021/am508711p ↗
12. Synthesis and characterization of antimony-doped tin oxide (ATO) nanoparticles with high conductivity using a facile ammonia-diffusion co-precipitation method10.1016/j.jallcom.2015.02.060 ↗
13. Water-dispersible small monodisperse electrically conducting antimony doped tin oxide nanoparticles10.1021/cm504409k ↗
14. Photocatalytic CO2 conversion of M0.33WO3 directly from the air with high selectivity: insight into full spectrum-induced reaction mechanism10.1021/jacs.8b12928 ↗
15. Z-scheme g-C3N4@CsxWO3 heterostructure as smart window coating for UV isolating, Vis penetrating, NIR shielding and full spectrum photocatalytic decomposing VOCs10.1016/j.apcatb.2018.02.024 ↗
16. Decay of photo-induced conductivity in Sb-doped SnO2 thin films, using monochromatic light of about bandgap energy10.1016/j.apsusc.2012.09.003 ↗
17. Synthesis and photoluminescence property of nanostructured sol–gel antimony tin oxide film on silica glass10.1016/j.cplett.2013.04.015 ↗
18. Structural and photoluminescence properties of single crystalline SnO2:In films deposited on α-Al2O3 (0001) by MOCVD10.1016/j.jcrysgro.2008.05.033 ↗
19. Effect of annealing temperature on the crystalline structure, growth behaviour and properties of SnO2:Sb thin films prepared by radio frequency (RF)-magnetron sputtering10.1016/j.jallcom.2015.12.037 ↗
20. Structural, electrical and optical characteristics of SnO2:Sb thin films by ultrasonic spray pyrolysis10.1016/j.tsf.2006.01.001 ↗
21. A study on low cost-high conducting fluorine and antimony-doped tin oxide thin films10.1016/j.apsusc.2004.11.074 ↗
22. Influence of Sb doping on crystal structure and electrical property of SnO2 nanoparticles prepared by chemical coprecipitation10.1016/j.physb.2011.03.065 ↗
23. Corrigendum to “Effect of ball-milling granulation with PVB adhesive on the sinterability of co-precipitated Yb:YAG nanopowders” [J. Alloys Compd. 589 (2014) 448–454]
24. CsxWO3 nanoparticle-based organic polymer transparent foils: low haze, high near infrared-shielding ability and excellent photochromic stability10.1039/C7TC01616F ↗
25. Functional inorganic nanofillers for transparent polymers10.1039/b608177k ↗
26. A Cs(x)WO3/ZnO nanocomposite as a smart coating for photocatalytic environmental cleanup and heat insulation10.1039/C5NR04452A ↗
27. Transparent wood containing CsxWO3 nanoparticles for heat-shielding window applications10.1039/C7TA00261K ↗
28. TiO2/antimony-doped tin oxide: highly water-dispersed nano composites with excellent IR insulation and super-hydrophilic property10.1016/j.solmat.2017.09.027 ↗
29. Analysis of critical doping level of sprayed antimony doped tin oxide films10.1007/s10854-010-0106-y ↗
30. Preparation of hard agglomerates free and weakly agglomerated antimony doped tin oxide (ATO) nanoparticles by coprecipitation reaction in methanol reaction medium10.1016/j.matchemphys.2005.08.046 ↗
31. Novel synthesis of homogenous CsxWO3 nanorods with excellent NIR shielding properties by a water controlled-release solvothermal process10.1039/c0jm01972k ↗
32. Tunable localized surface plasmon resonances in tungsten oxide nanocrystals10.1021/ja211363w ↗
33. A simple two-step method to fabricate highly transparent ITO/polymer nanocomposite films10.1016/j.apsusc.2012.05.049 ↗
34. Preparation and optical properties of indium tin oxide/epoxy nanocomposites with polyglycidyl methacrylate grafted nanoparticles10.1021/am200841n ↗