Pyrolyzable pore-formers for the porous-electrode formation in solid oxide fuel cells: A review
Source abstract
Abstract
Abstract Porosity is a key property that plays a crucial role in enhancing the performance of solid oxide fuel cell (SOFC) electrodes. The addition of pyrolyzable pore-formers to the electrode materials of SOFCs can generate suitable porous microstructures with the required porosity, pore sizes, and morphology. The present review provides details on the characterization and microstructural analysis, firing profile, electrical conductivity, mechanical strength, and gas permeability of the porous electrodes of SOFCs. A better understanding of these relationships can help to design optimized porous microstructures for generating higher power densities of the cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
2. Impact of anode microstructure on solid oxide fuel cells10.1126/science.1176404 ↗
3. Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs10.1016/j.ijhydene.2011.01.151 ↗
4. Minimization of polarization resistance in solid oxide fuel cells by proper design of micro-/nano-structure of porous composite electrodes10.1016/j.electacta.2011.10.083 ↗
5. Effect of porous interlayer on the long-term stability of (La0.8Sr0.2)0.97MnO3 cathode for solid oxide fuel cells10.1016/j.jpowsour.2013.02.063 ↗
6. Performance enhancement of strontium-doped lanthanum manganite cathode by developing a highly porous microstructure10.1007/s10800-012-0462-9 ↗
7. Fabrication of highly porous Yttria-stabilized zirconia by acid leaching nickel from a Nickel-Yttria-stabilized zirconia cermet10.1111/j.1151-2916.2002.tb00299.x ↗
8. Effect of the addition of pore former10.1007/s10973-015-4693-y ↗
9. Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodes10.1016/j.ces.2013.06.032 ↗
10. Microstructural modeling of solid oxide fuel cell anodes10.1021/ie800065w ↗
11. A general mathematical model for analyzing the performance of fuel-cell membrane-electrode assemblies10.1016/S0378-7753(03)00358-6 ↗
12. Gas transport in porous electrodes of solid oxide fuel cells: a review on diffusion and diffusivity measurement10.1016/j.jpowsour.2013.02.089 ↗
13. Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons10.1016/S0021-9517(02)00121-5 ↗
14. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for solid oxide fuel cells10.1016/j.jpowsour.2010.08.006 ↗
15. Enhanced triple-phase boundary density in infiltrated electrodes for solid oxide fuel cells demonstrated by high-resolution tomography10.1016/j.jpowsour.2014.05.038 ↗
16. Modelling the effects of measured anode triple-phase boundary densities on the performance of micro-tubular hollow fiber SOFCs10.1016/j.ssi.2009.10.013 ↗
17. Three-phase boundary length in solid-oxide fuel cells: a mathematical model10.1016/j.jpowsour.2007.11.083 ↗
18. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
19. Tao · 2004 · 87
20. Novel microstructural strategies to enhance the electrochemical performance of La0.8Sr0.2MnO3−δ cathodes10.1021/acsami.5b00255 ↗
21. Micro‐modeling of porous composite anodes for solid oxide fuel cells10.1002/aic.12689 ↗
22. Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports10.1007/s10800-008-9682-4 ↗
23. Fabrication and electrochemical characterization of freeze-cast tubular solid oxide fuel cells10.1149/07801.1885ecst ↗
24. Creation of porous ceria by sublimation of tin dioxide during sintering10.1002/adem.200500212 ↗
25. Freeze‐casting of porous ceramics: a review of current achievements and issues10.1002/adem.200700270 ↗
26. Steam electrolysis in a solid oxide electrolysis cell fabricated by the phase-inversion tape casting method10.1016/j.elecom.2015.10.015 ↗
27. Anode-supported solid oxide fuel cells based on Sm0.2Ce0.8O1.9 electrolyte fabricated by a phase-inversion and drop-coating process10.1016/j.ijhydene.2016.03.166 ↗
28. Synthesis of highly porous Yttria‐stabilized zirconia by tape‐casting methods10.1111/j.1151-2916.2003.tb03311.x ↗
29. A novel method to fabricate inert substrate-supported microtubular solid oxide fuel cells by selective leaching10.1149/07801.1781ecst ↗
30. Characteristics of Ni/YSZ ceramic anode prepared using carbon microspheres as a pore former10.1016/j.ijhydene.2012.07.108 ↗
31. Paper‐fibres used as a pore‐former for anode substrate of solid oxide fuel cell10.1002/fuce.201000135 ↗
32. Influence of graphite pore forming agents on the structural and electrochemical properties of porous Ni-CGO anode10.1149/2.067212jes ↗
33. Review on fabrication techniques for porous electrodes of solid oxide fuel cells by sacrificial template methods10.1016/j.rser.2017.03.095 ↗
34. Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs10.1016/j.jeurceramsoc.2007.10.001 ↗
35. Macro-porous ceramics: processing and properties10.1179/1743280411Y.0000000006 ↗
36. Preparation of porosity–graded SOFC anode substrates10.1002/fuce.200500116 ↗
37. Effect of pore formers on properties of tape cast porous sheets for electrochemical flue gas purification10.1016/j.jeurceramsoc.2015.09.030 ↗
38. Influence of pore formers on physical properties and microstructures of supporting cathodes of solid oxide electrolysis cells10.1016/j.ijhydene.2009.04.027 ↗
39. Novel polymer fibers prepared by electrospinning for use as the pore-former for the anode of solid oxide fuel cell10.1016/j.electacta.2010.04.037 ↗
40. The influence of pore formers on the microstructure of plasma-sprayed NiO–YSZ anodes10.1016/j.jpowsour.2012.02.046 ↗
41. Fabrication of anode support for solid oxide fuel cell using zirconium hydroxide as a pore former10.1016/j.jpowsour.2010.10.109 ↗
42. Effects of the use of pore formers on performance of an anode supported solid oxide fuel cell10.1111/j.1551-2916.2005.00097.x ↗
43. Effect of composite pore-former on the fabrication and performance of anode-supported membranes for SOFCs10.1016/j.memsci.2008.03.008 ↗
44. Effects of pore formers on microstructure and performance of cathode membranes for solid oxide fuel cells10.1016/j.jpowsour.2011.08.036 ↗
45. Effect of graphite pore former on oxygen electrodes prepared with La 0.6 Sr 0.4 CoO 3− δ nanoparticles10.1016/j.elecom.2009.12.018 ↗
46. Graded porous solid oxide fuel cells fabricated by multilayer tape casting and co-firing progress10.1016/j.ijhydene.2015.10.007 ↗
47. Development of tailored porous microstructures for infiltrated catalyst electrodes by aqueous tape casting methods10.1149/06801.2047ecst ↗
48. Electrochemical properties of tubular SOFC based on a porous ceramic support fabricated by phase-inversion method10.1016/j.jmst.2016.03.002 ↗
49. Anode supported planar solid oxide fuel cells with the large size of 30 cm × 30 cm via tape-casting and co-sintering technique10.1016/j.ijhydene.2015.12.032 ↗
50. Mistler · 2000
51. Mechanically alloyed Ni/8YSZ powder mixtures: preparation, powder characterization and sintering behavior10.1023/A:1004489002278 ↗
52. Using flixweed seed as a pore-former to prepare porous ceramics
53. The effects of triethylenetetramine grafting of multi‐walled carbon nanotubes on its dispersion, filler‐matrix interfacial interaction and the thermal properties of epoxy nanocomposites10.1002/pen.21461 ↗
54. Microstructure and cell performance of NiO–YSZ composite anode‐supported solid oxide fuel cells using graphite as anode pore‐former: effects of graphite particle size and HNO3 treatment10.1111/ijac.12274 ↗
55. Recent fabrication techniques for micro-tubular solid oxide fuel cell support: a review10.1016/j.jeurceramsoc.2014.08.034 ↗
56. Fabrication–microstructure–performance relationships of reversible solid oxide fuel cell electrodes–review10.1179/026708311X13081465539845 ↗
57. Diffusion-limited electrochemical oxidation of H2/CO on Ni-anode catalyst in a CH4/CO2- solid oxide fuel cell10.1016/j.cattod.2015.12.026 ↗
58. Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting10.1016/j.jpowsour.2009.02.008 ↗
59. The direct carbon solid oxide fuel cell with H2 and H2O feeds10.1016/j.ssi.2014.09.014 ↗
60. Fabrication and characterization of tubular solid oxide fuel cells10.1111/j.1744-7402.2007.02127.x ↗
61. Molybdenum dioxide as an alternative catalyst for direct utilization of methane in tubular solid oxide fuel cells
62. Fabrication and evaluation of NiO/Y2O3-stabilized-ZrO2 hollow fibers for anode-supported micro-tubular solid oxide fuel cells10.1016/j.ceramint.2016.02.083 ↗
63. Fabrication of tubular solid oxide fuel cells by solvent‐assisted lamination and co‐firing a rolled multilayer tape cast10.1111/ijac.12828 ↗
64. Fabrication of anode-supported microtubular solid oxide fuel cells by sequential dip-coating and reduced sintering steps10.1016/j.electacta.2017.11.115 ↗
65. Tape casting fabrication and co-sintering of solid oxide “half cells” with a cathode–electrolyte porous interface10.1016/j.ssi.2006.01.016 ↗
66. Anode-supported solid oxide fuel cells with La0.6Sr0.4CoO3−λ‐Zr0.84Y0.16O2−δ composite cathodes fabricated by an infiltration method10.1149/1.2163814 ↗
67. Performance enhancement for solid oxide fuel cells using electrolyte surface modification10.1016/j.jpowsour.2015.01.116 ↗
68. Fabrication of thin films on an anode support with surface modification for high-efficiency intermediate-temperature solid oxide fuel cells via a dip-coating method10.1016/j.electacta.2016.09.065 ↗
69. Facile one-step forming of NiO and yttrium-stabilized zirconia composite anodes with straight open pores for planar solid oxide fuel cell using phase-inversion tape casting method10.1016/j.jpowsour.2014.10.190 ↗
70. A novel method of modifying electrolyte surface at mesoscale for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2015.09.057 ↗
71. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
72. Electrolyte degradation in anode supported microtubular yttria stabilized zirconia-based solid oxide steam electrolysis cells at high voltages of operation10.1016/j.jpowsour.2011.01.015 ↗
73. Life testing of LSM–YSZ composite electrodes under reversing-current operation10.1039/c3cp52973h ↗
74. Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells10.1016/j.ijhydene.2011.05.103 ↗
75. A porous yttria-stabilized zirconia layer to eliminate the delamination of air electrode in solid oxide electrolysis cells10.1016/j.jpowsour.2017.05.049 ↗
76. Microstructural modification of the anode/electrolyte interface of SOEC for hydrogen production10.1016/j.ijhydene.2012.05.093 ↗
77. Effect of microstructure on performance of double-layer hydrogen electrodes for reversible SOEC/SOFC10.1149/2.0241709jes ↗
78. Research and development of highly active and durable electrocatalysts based on multilateral analyses of fuel cell reactions10.5796/electrochemistry.85.526 ↗
79. Evaluation of the relationship between cathode microstructure and electrochemical behavior for SOFCs10.1016/j.ssi.2008.10.017 ↗
80. Modeling the influence of carbon spheres on the porosity of SOFC anode materials10.1111/j.1551-2916.2011.05037.x ↗
81. In praise of pores10.1126/science.1162962 ↗
82. Multi-scale 3D imaging of absorbing porous materials for solid oxide fuel cells10.1007/s10853-014-8275-3 ↗
83. Brandon · 2013
84. Towards intelligent engineering of SOFC electrodes: a review of advanced microstructural characterisation techniques
85. Designing with pores-synthesis and applications10.14356/kona.2010012 ↗
86. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review10.1016/j.rser.2014.04.043 ↗
87. Schüth · 2002
88. Porous ceramics prepared using poppy seed as a pore-forming agent10.1016/j.ceramint.2006.05.019 ↗
89. Loehman · 2010
90. Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs10.1016/j.ijhydene.2010.04.156 ↗
91. herle, design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part I: microstructure optimization10.1016/j.jpowsour.2010.07.092 ↗
92. Effect of various pore formers on the microstructural development of tape-cast porous ceramics10.1016/j.ceramint.2012.06.041 ↗
93. Influence of processing conditions on the microstructure of NiO-YSZ supporting anode for solid oxide fuel cells10.1016/j.ceramint.2014.10.168 ↗
94. Porous yttria-Stabilized zirconia ceramics fabricated by nonaqueous-based gelcasting process with PMMA microsphere as pore-forming agent10.1111/jace.12074 ↗
95. Characteristics of NiO-YSZ anode based on NiO particles synthesized by the precipitation method10.1016/j.jallcom.2006.12.130 ↗
96. Fabrication and characterization of components for cube shaped micro tubular SOFC bundle10.1016/j.jpowsour.2006.10.002 ↗
97. Preparation and microstructure of ZrO2-and LaGaO3-based high-porosity ceramics10.1134/S0020168506070193 ↗
98. Atmospheric plasma-sprayed metal-supported solid oxide fuel cells with varying cathode microstructures10.1149/06801.1779ecst ↗
99. Challenge for lowering concentration polarization in solid oxide fuel cells10.1016/j.jpowsour.2015.10.024 ↗
100. Anodic behavior of 8Y2O3–ZrO2/NiO cermet using an anode-supported electrode10.1016/j.ijhydene.2010.08.050 ↗