Effect of sintering temperature on mechanical and tribological properties of hydroxyapatite measured by nanoindentation and nanoscratch experiments
Source abstract
Abstract
The aim of this paper is to investigate the mechanical and tribological properties of a commercial hydroxyapatite (HA) by nanoindentation and nanoscratch experiments. The nanoindentation and nanoscratch tests were performed on the HA samples prepared at different sintering temperatures in the range of 1000–1400 1C. Atomic force microscopy (AFM) images were taken from the specimen surface before and after the indentation and scratch tests for analyzing its deformation. The values of Young's modulus, hardness and scratch resistance of the HA samples were measured. The effect of sintering temperature on the mechanical and tribological properties of HA samples was also studied. The results indicated that nanoindentation and nanoscratch experiments are acceptable methods for measuring the mechanical and tribologocal properties of HA. The Young's modulus of the HA specimens initially enhanced with increasing the sintering temperature, but decreased after the sintering temperature of 1200 1C. Similar trends were observed for hardness and scratch resistance of HA, but their decreasing behavior started at about 1300 1C. & 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Characterization of the Interface between hydroxyapatite coating film and bone: use of a new expression to correct matrix effect for PIXE measurements in thick samples embedded in resin10.1088/0022-3727/33/4/301 ↗
2. Biopolymers for hard and soft engineered tissues: application in odontoiatric and plastic surgery field10.3390/polym3010509 ↗
3. Applications of nanostructures calcium phosphate in tissue engineering10.1039/c3bm60058k ↗
4. Comparison of hydroxyapatite ceramics and hydroxyapatite /borosilicate glass composites prepared by slip casting
5. Properties of hydroxyapatite produced by annealing of bovine bone10.1016/j.ceramint.2006.04.001 ↗
6. The influence of sintering temperature on the properties of compacted bovine hydroxyapatite10.1016/j.msec.2009.01.007 ↗
7. Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods10.1016/j.jmatprotec.2008.07.040 ↗
8. Rapid densification of nanocrystalline hydroxyapatite for biomedical applications10.1016/j.ceramint.2006.05.009 ↗
9. Development of high strength hydroxyapatite by solid-state-sintering process10.1016/j.ceramint.2005.10.025 ↗
10. Nano/micro scale investigation of tribological and mechanical properties of epoxy/MWNT nanocomposites10.1002/mame.201100271 ↗
11. Investigation of mechanical and tribological properties of bone cement by nano-indentation and nano-scratch experiments10.1016/j.polymertesting.2012.06.002 ↗
12. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
13. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
14. The effect of indentation-induced microcracks on the elastic modulus of hydroxyapatite10.1007/s10853-012-6556-2 ↗
15. Hyroxyapatite synthesis and characterization in dense polycrystalline form10.1007/BF02403350 ↗
16. Sintering behaviour and mechanical properties of hydroxyapatite and dicalcium phosphate
17. Consolidation of nanocrystalline hydroxyapatite powder10.1016/j.stam.2006.11.002 ↗
18. Dependence of the mechanical properties of sintered hydroxyapatite on the sintering temperature10.1016/j.msea.2006.05.158 ↗
19. The hardness of poly (methylmethacrylate)10.1016/0301-679X(95)00045-6 ↗
20. The effect of powder processing on densification, microstructure and mechanical properties of hydroxyapatite10.1016/S0272-8842(01)00102-X ↗
21. Analytical models of scratch hardness10.1016/0301-679X(96)00014-X ↗
22. Scratch resistance and localised damage characteristics of polymer surfaces – a review10.1002/mawe.200300687 ↗
23. Scratching maps for polymers10.1016/S0043-1648(96)07314-0 ↗
24. Scratch and normal hardness characteristics of polyamide 6/nano-clay composite10.1016/j.wear.2008.12.010 ↗
25. Mechanical properties of human dental enamel on the nanometre scale10.1016/S0003-9969(00)00089-3 ↗
26. The hardness and modulus of elasticity of primary molar teeth:an ultra-micro-indentation study10.1016/S0300-5712(00)00043-9 ↗
27. Hardness and young׳s modulus determined by nanoindentation technique of filler particles of dental restorative materials compared with human enamel10.1002/jbm.820270607 ↗
28. Mechanical properties of human enamel as a function of age and location in the tooth
29. Elastic modulus and stress–strain response of human enamel by nano-indentation10.1016/j.biomaterials.2006.03.045 ↗