Influence of different coating structures on the oxidation resistance of MoSi2 coatings
Source abstract
Abstract
Abstract Two different structures of MoSi2 coatings were prepared on Niobium based alloys by using a two step process. The as-deposited type(a) MoSi2 coating structure consists of a MoSi2 layer on the surface and a NbSi2 layer underneath, while the type(b) MoSi2 coating consists of an outer MoSi2 layer and an inner unsiliconized Mo layer. The oxidation behaviors of the two different types MoSi2 coatings were examined at 1200 °C for 100 h in air, and the mass gains of type(a) and type(b) MoSi2 coated specimens were 0.64 mg/cm2 and 0.59 mg/cm2 respectively. The excellent oxidation resistance of both type(a) and type(b) MoSi2 coated samples at 1200 °C was due to the formation of a dense and continuous SiO2 scale during oxidation. As the CTE mismatch between the outer MoSi2 coating and the inner layer, cracks distributed within both type(a) and type(b) MoSi2 coating structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. MoSi2/Al2O3 FGM: elaboration by tape casting and SHS10.1016/S0955-2219(01)00198-4 ↗
2. Vacuum plasma spraying of MoSi2 and its composites10.1016/0921-5093(92)90316-S ↗
3. An experimental study on synthesizing submicron MoSi2-based coatings using electrothermal explosion ultra-high speed spraying method10.1016/j.surfcoat.2007.10.027 ↗
4. Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy10.1016/j.intermet.2008.06.014 ↗
5. Microstructure evolution and oxidation behavior of B modified MoSi2 coating on Nb–Si based alloys10.1016/j.corsci.2015.12.003 ↗
6. Microstructure and oxidation resistance of Mo–Si–B coating on Nb based in situ composites10.1016/j.corsci.2014.07.006 ↗
7. Effect of hot-dip siliconizing time on phase composition and microstructure of Mo–MoSi2 high temperature structural materials10.1016/j.ceramint.2018.12.018 ↗
8. Effect of siliconizing temperature on microstructure and phase constitution of Mo–MoSi2 functionally graded materials10.1016/j.ceramint.2018.03.136 ↗
9. A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes10.1016/j.ceramint.2010.10.018 ↗
10. Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying10.1016/j.apsusc.2013.08.029 ↗
11. Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 1650 °C10.1016/j.surfcoat.2017.05.054 ↗
12. Oxidation behavior of tungsten and germanium-alloyed molybdenum disilicide coatings10.1016/0921-5093(92)90326-V ↗
13. Deposition and cyclic oxidation behavior of a protective (Mo, W)(Si, Ge)2 coating on Nb‐base alloys10.1149/1.2069395 ↗
14. An ultra-high temperature Mo–Si–B based coating for oxidation protection of NbSS/Nb5Si3 composites10.1016/j.apsusc.2015.02.061 ↗
15. Silicide coating fabricated by HAPC/SAPS combination to protect niobium alloy from oxidation10.1021/acsami.6b04599 ↗
16. Deposition and oxidation behaviour of molybdenum disilicide coating on Nb based alloys substrate by combined AIP/HAPC processes10.1016/j.ceramint.2019.02.115 ↗
17. The Mo-Si (molybdenum-silicon) system10.1007/BF02645979 ↗
18. Growth mechanism of phases by interdiffusion and atomic mechanism of diffusion in the molybdenum–silicon system10.1016/j.intermet.2011.03.027 ↗
19. Growth mechanism of phases by interdiffusion and diffusion of species in the niobium–silicon system10.1016/j.actamat.2010.11.022 ↗
20. Microstructure and oxidation behavior of Si–MoSi2 functionally graded coating on Mo substrate10.1016/j.ceramint.2017.02.024 ↗
21. High‐temperature oxidation of molybdenum disilicide10.1111/j.1151-2916.1966.tb13227.x ↗
22. Oxidation resistance comparison of MoSi2 and B-modified MoSi2 coatings on pure Mo prepared through pack cementation10.1002/maco.201407631 ↗
23. Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773 K10.1016/j.surfcoat.2005.01.035 ↗
24. Protection of molybdenum from oxidation by molybdenum disilicide based coatings10.1016/0022-5088(64)90007-4 ↗
25. Oxidation-resistant boron-doped and germanium-doped silicide coatings for refractory-metals at high-temperature10.1016/0921-5093(95)03342-4 ↗
26. Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process10.1016/j.ijrmhm.2014.03.003 ↗
27. Effect of filler on the oxidation protective ability of MoSi2 coating for Mo substrate by halide activated pack cementation10.1016/j.matdes.2015.12.079 ↗
28. High temperature isothermal oxidation behavior of NbSi2 coating at 1000–1450°C10.1016/j.corsci.2017.10.002 ↗
29. Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy10.1016/j.intermet.2008.06.014 ↗
30. Engineering limitations of MoSi2 coatings10.1016/0921-5093(92)90313-P ↗
31. The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400 degrees C10.1016/j.intermet.2011.03.029 ↗
32. Oxidation behavior of Nb–Si–B alloys with the NbSi2 coating layer formed by a pack cementation technique10.1016/j.ijrmhm.2013.02.010 ↗
33. Mechanical behaviour and oxidation resistance of structural silicides10.1179/174328006X79454 ↗
34. Study of the microstructure and oxidation of NbSi2 base alloys
35. The oxidation of metals at high temperature
36. The thermal expansion of niobium pentoxide and its effect on the spalling of niobium oxidation films10.1016/0022-5088(63)90008-0 ↗