Aluminum titanate based ceramics from aluminum sludge waste
Source abstract
Abstract
Abstract This work aims at obtaining aluminum titanate-based ceramics (Al2TiO5: AT) composites from industrial wastes. Al-sludge waste and rutile ore were used as rich sources of alumina and titania instead of pure materials. Sludge-(0–40 wt%) rutile mixtures were mixed, formed and fired at 1350 °C for various times. Phase composition, microstructure, densification, mechanical and thermal behaviors of the obtained AT composites have been investigated. Complete conversion of the starting materials to AT with bulk density of 3.199 g/cm3, compressive strength and modulus of rupture of 326.425 MPa and 30.84 MPa, respectively and very low CTE (−0.927*10−6 K−1) were achieved by firing the sludge-(30 wt%) rutile at 1350 °C for 4 h. These results suggest that the obtained AT-ceramics from Al-sludge waste-rutile ore are a promising and an ecofriendly route.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Thermal stabilization of aluminum titanate and properties of aluminum titanate solid solutions10.1007/BF02387756 ↗
2. Thermal and mechanical properties of aluminum titanate–mullite composites10.1557/JMR.2000.0056 ↗
3. A comparison study of tialite ceramics doped with various oxide materials and tialite–mullite composites: microstructural, thermal and mechanical properties10.1016/j.jeurceramsoc.2004.03.024 ↗
4. The effect of Fe2O3 addition on tialite formation10.1016/j.ceramint.2008.02.009 ↗
5. Stabilized tialite–mullite composites with low thermal expansion and high strength for catalytic converters10.1016/j.jeurceramsoc.2006.07.020 ↗
6. Effect of additives on properties of aluminum titanate ceramics10.1016/S1003-6326(11)60899-6 ↗
7. Effect of excess SiO2 on the reaction sintering of aluminium titanate-25vol% mullite composites10.1016/S0272-8842(97)00006-0 ↗
8. Eutectoid decomposition of aluminum titanate (Al2TiO5) ceramics under Spark Plasma (SPS) and Conventional (CRH) thermal treatments10.1016/j.ceramint.2013.06.052 ↗
9. Formation of tialite (β-Al2TiO5) from pechini derived polimeric resins containing Ti, Al and Si metallic elements
10. Sliding wear behaviors of in situ alumina/aluminum titanate ceramic composites10.1016/j.wear.2008.11.006 ↗
11. IreneBarrios de Arenas, Reactive sintering of aluminum titanate, Sintering of ceramics – New emerging techniques, Dr. Arunachalam Lakshmanan (Ed.), 2012. ISBN: 978-953-51-0017-1, InTech 〈http://www.intechopen.com/books/sintering-of-ceramics-new-emerging〉.10.5772/34366 ↗
12. Snehlata Kumari, Effect of TiO2 addition in Al2O3: phase evolution, densification, microstructure and mechanical properties, A thesis submitted in the partial fulfillment of the requirement for the degree of batchlor of technology, Department of Ceramic Engineering, National Institute of Technology, Rourkela (2013), Roll No-109CR0676.
13. The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminum titanate10.1016/j.mseb.2008.12.002 ↗
14. Microstructural, mechanical and thermal characterization of sol–gel derived aluminium titanate–mullite ceramic composites10.1016/j.actamat.2006.02.032 ↗
15. Aluminum titanate-tetragonal zirconia composite with low thermal expansion and high strength simultaneously10.1016/S0167-2738(97)00301-9 ↗
16. Effect of spodumene additions on the sintering and densification of aluminum titanate10.1016/S0025-5408(98)00061-0 ↗
17. Sintering behavior of Al2TiO5 base ceramics and their thermal properties10.1016/S0272-8842(98)00083-2 ↗
18. Mineral-Oxide-Doped aluminum titanate ceramics with improved thermomechanical properties
19. Aluminum titanate-calcium dialuminate composites with low thermal expansion and high strength10.1016/j.jallcom.2015.09.237 ↗
20. Effect of ZrSiO2 and MgO additions on reaction sintering and properties of Al2TiO5-based materials10.1007/BF00575415 ↗
21. Reformation of phase composition in decomposed aluminium titanate10.1016/j.matchemphys.2008.03.017 ↗
22. Temperature dependence of mechanical properties of aluminum titanate ceramics10.1016/j.jeurceramsoc.2006.04.182 ↗
23. Preparation of Al2TiO5 from alkoxides and the effects of additives on its properties10.1023/A:1018605431120 ↗
24. Production and characterization of metastable Al2O3-TiO2 ceramic materials10.1007/s10853-007-1871-8 ↗
25. In situ alumina/aluminum titanate bulk ceramic composites prepared by SPS from different structured composite powders10.1016/j.jallcom.2009.03.129 ↗
26. Melt synthesis of Al2TiO5 containing composites and reinvestigation of the phase diagram Al2O3-TiO2 by powder X-ray diffraction10.1007/s10832-006-9873-5 ↗
27. Effect of sintering on TiO2-impregnated alumina foams10.1023/A:1020012931084 ↗
28. Characterization of alumina-titania mixed oxide supports Part II: Al2O3-based supports10.1016/S1387-1811(98)00121-8 ↗
29. 〈http://www.alumisr.com〉.
30. 〈http://www.arabaluminum.com〉.
31. F. Michael Saunders, Reclamation of Aluminum Finishing Sludges, Project Summary, Water Engineering Research Laboratory, Environmental Protection Agency (EPA), United States, 1988.
32. Regeneration of spent alkali from aluminum washing10.1016/j.seppur.2005.05.010 ↗
33. ASTM C 373-72, 1984.10.1016/0040-6031(84)85095-9 ↗
34. ASTM C 1424-04.
35. ASTM C 1327-03.
36. ASTM C 372-394, 2001.
37. Thermal stability of Al2TiO5 ceramics for new diesel particulate filter applications-a literature review
38. Extrusion characteristics of alumina-aluminium titanate composite using boehmite as a reactive binder10.1016/S0955-2219(00)00164-3 ↗
39. Effect of titania additive on structural and mechanical properties of alumina–fluorapatite composites10.1016/S1005-0302(12)60182-0 ↗
40. Effect of ZrSiO4 and MgO additions on reaction sintering and properties of Al2TiO5 based materials10.1007/BF00575415 ↗
41. Bengisu · 2001 · 28–30 · 407
42. Sintering response of in-situ Zirconia/Mullite ceramic composite
43. D.W. Richerson, Modern ceramic engineering, properties, processing and use in design Markel Dekker, New York and Basel, 85, 1982.
44. Effect of TiO2 addition on the sintering behavior, hardness and fracture toughness of an ultrafine alumina10.1016/j.msea.2008.04.048 ↗
45. Low thermal expansion behavior and thermal durability of ZrTiO4–Al2TiO5–Fe2O3 ceramics between 750 and 1400°C10.1016/S0955-2219(02)00126-7 ↗
46. Mechanical properties of Al2TiO5 ceramics for high temperature application10.2174/1573413709666131109005012 ↗
47. Fabrication and thermal properties of Al2TiO5/Al2O3 composites
48. Thermophysical properties of aluminium titanate
49. Thermal expansion hysteresis of aluminum titanate
50. Micro- and macroscopic thermal expansion of stabilized aluminum titanate10.1016/j.jeurceramsoc.2010.04.038 ↗
51. Tkachenko · 1988 · 8 · 45