In vitro biodegradable and mechanical performance of biphasic calcium phosphate porous scaffolds with unidirectional macro-pore structure

Abstract In this study, porous biphasic calcium phosphate (BCP) scaffolds were fabricated by a freeze–gel casting technique using a tertiary-butyl alcohol (TBA) based slurry. After sintering, unidirectional macropore channels of scaffolds aligned regularly along the TBA ice growth direction were tailored simultaneously with micropores formed in the outer wall of the pore channels. The synthesized porous BCP scaffolds (two different sintering temperatures) exhibit compressive strength of 46.8 MPa for 43.0% porosity and 33.1 MPa for 45.9% porosity, respectively. After immersion in Hank's balanced salt solution (HBSS) for 1, 2, 4, 8 weeks, a precipitation started to be formed with individual small granules on the scaffolds surface. In the case of BCP scaffolds sintered at 1200 °C, β-TCP were slowly degraded with increasing the immersing time; on the other hand, α-TCP (from BCP scaffolds sintered at 1300 °C) was extremely degraded within 1 week of immersing. This behavior could be due to a fast hydrolysis (dissolution–reprecipitation) as a phase transformation from α-TCP to brushite or apatite compared to the β-TCP. After immersion in HBSS, overall the compressive strength of the scaffolds reduced by the gradual degradation in biological environment solution. This behavior is consistent with the degradation behavior of scaffolds after immersion in HBSS.