Al2O3 coated LiNi1/3Co1/3Mn1/3O2 cathode material by sol–gel method: Preparation and characterization
Source abstract
Abstract
Abstract LiNi 1/3 Co 1/3 Mn 1/3 O 2 , a promising cathode material over conventional ones for lithium-ion battery, was synthesized via the sol–gel method. The cathode material was coated by Al 2 O 3 through a modified coating process to improve the electrochemical cycle performance and rate capacity. For samples with thicker Al 2 O 3 coating, there was an increase with a subsequent decrease in the discharge capacity for cut-off voltage increasing from 4.3–3.0 V to 4.5–3.0 V. The Al 2 O 3 coating optimized at 5% can apparently improve the discharge capacity and the cycle performance of LiNi 1/3 Co 1/3 Mn 1/3 O 2 at high voltage. Transmission electron microscope (TEM) images also confirmed uniform coating at this optimized content. Electrochemical impedance spectroscopy (EIS) and conductivity test results suggested suppression in the growth of charge transfer resistance and an enhancement in the conductivity for Al 2 O 3 -coated LiNi 1/3 Co 1/3 Mn 1/3 O 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Armand · 2008 · 451 · 652
2. Comparison of Al2O3- and AlPO4-coated LiCoO2 cathode materials for a Li-ion cell10.1016/j.jpowsour.2005.03.118 ↗
3. Improvement of electrochemical properties of LiNi1/3Co1/3Mn1/3O2 by coating with V2O5 layer10.1016/j.jallcom.2012.10.090 ↗
4. Improved kinetics of LiNi1/3Mn1/3Co1/3O2 cathode material through reduced graphene oxide networks10.1039/c2cp23363k ↗
5. Enhancing the performances of Li-ion batteries by carbon-coating: present and future10.1039/C1CC14764A ↗
6. Synthesis and electrochemical performance of Li(Ni0.8Co0.15Al0.05)0.8(Ni0.5Mn0.5)0.2O2 with core–shell structure as cathode material for Li-ion batteries10.1016/j.jallcom.2011.05.060 ↗
7. Cycle life improvement of ZrO2-coated spherical LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries10.1016/j.jpowsour.2008.11.113 ↗
8. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
9. Research and development of preparing spherical cathode materials for lithium ion batteries by controlled crystallization method
10. Synthesis of in situ network-like vapor-grown carbon fiber improved LiFePO4 cathode materials by microwave pyrolysis chemical vapor deposition10.1016/j.jallcom.2011.06.054 ↗
11. Properties of LiNi1/3Co1/3Mn1/3O2 cathode material synthesized by a modified Pechini method for high-power lithium-ion batteries10.1016/j.jallcom.2009.02.023 ↗
12. Synthesis of LiMn1/3Ni1/3Co1/3O2 in molten KCl for rechargeable lithium-ion batteries10.1016/j.jallcom.2008.08.074 ↗
13. Thermal stability of charged LiNi0.5Co0.2Mn0.3O2 cathode for Li-ion batteries investigated by synchrotron based in situ X-ray diffraction10.1016/j.jallcom.2013.02.060 ↗
14. Preparation and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 coated with metal oxides coating10.1016/j.jpowsour.2006.02.080 ↗
15. Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries10.1016/j.electacta.2006.07.033 ↗
16. A modified ZrO2-coating process to improve electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O210.1016/j.jpowsour.2008.12.037 ↗
17. Role of alumina coating on Li–Ni–Co–Mn–O particles as positive electrode material for lithium-ion batteries10.1021/cm050566s ↗